• 멤브레인
• /
• 제6권2호
• /
• pp.72-78
• /
• 1996

양이온성의 quaternary ammonium polysulfone인 AMPS는 2단계 과정을 통하여 제조하였다. 먼저, 폴리술폰을 chloromethyl methyl ether와 촉매로 ZnO를 사용하여 chloromethylation반응으로 CMPS를 제조하는 단계와 준비된 CMPS에 triethylamine을 반응시켜 quaternary ammonium기를 도입시키는 amination 단계로 이루어 진다.

• 한국응용과학기술학회지
• /
• 제11권2호
• /
• pp.139-146
• /
• 1994

MDABM and MDAEW, as a accelerating weight loss agents, were prepared by adding water to myristyldimethylbenzylammonium bromide(MDAB) and myristyldimethylethylammonium ethyl sulfate (MDAE) synthesized. As a result of weight loss finishing of the MDABW and MDAEW with NaOH on PET fiber, the ratio of weight loss of MDABW was very larger than that of MDAEW. This result showed that quaternary ammonium bromide had higher weight loss effect than quaternary ammonium sulfate, and the ratio of weight loss was greatly varied with the kind of quaternary ammonium salts used. In these conditions, proper treatment concentration, treatment time, and treatment bath ratio were about 8g/l, $6O{\sim}90min$, and $40:1{\sim}50:1$, respectively.

• 대한화장품학회지
• /
• 제14권1호
• /
• pp.16-37
• /
• 1988

A new quaternary ammonium compound, hydrolyzed ginseng-sapoin quaternary (HGSQ), from hydrolyzed Korean ginseng-saponin and 2, 3-epoxypropyltrimethyl ammonium chloride has been developed as a conditioning agent for hair care products. This structure has the hydrophilic group from the introduced cationic and the hydrophobic group from the aglycone of ginseng saponin. Its properties: surface tension, conductivity, critical micelle concentration, eye irritation, sorption onto hair, force reduction (%) for 20% extension and moisture retention effect comparing with the commercial standards. Also half-head tests of HGSQ-containing shampoo were carried out to compare the conditioning effects in shampoos.

• Tribology and Lubricants
• /
• 제30권6호
• /
• pp.323-329
• /
• 2014

The friction-reducing properties of lubricants containing ionic liquids based on ammonium dithiocarbamate are studied. The ionic liquids are produced through the following two steps: the synthesis of sodium alkyl dithiocarbamates via the substitution reaction of dialkylamine and carbon disulfide and their subsequent conversion into ammonium dithiocarbamate-based ionic liquids through an ion-exchange reaction with a quaternary alkyl ammonium halide salt. The structures of the ionic liquids are characterized by NMR spectroscopy and Fourier transform infrared spectroscopy. The isolated yields of the ionic liquids, which are viscous and pale yellow, are approximately 92%. The Brookfield viscosities and pour points of the ionic liquids are determined. Further, their wear resistances are measured through the four-ball wear test and the Schwingung Reibung Ver-schleiss (oscillation, friction, wear) test. The wear scar diameter of the lubricants containing 1 wt of the quaternary alkyl ammonium dithiocarbamate-based ionic liquids (0.475-0.631 mm) is significantly lower than that of the base oil (0.825 mm), proving that the ammonium dithiocarbamate-based ionic liquids have good friction-reducing characteristics. However, these friction-reducing characteristics fade significantly after long-term storage, owing to the degradation of the ionic liquids.

• 폴리머
• /
• 제39권2호
• /
• pp.268-274
• /
• 2015

In this paper, the isothermal crystallization kinetics of a functional PP (FPP) with different grafting yields (GY)-methacryloxyethyltrimethyl ammonium chloride (DMC) grafted PP were investigated by differential scanning calorimetry (DSC). The results showed that the crystallization rate of FPP (GY=4.83%) was the highest for all of the studied samples. Furthermore, for the FPP with different GY, the value of $t_{1/2}$ became longer with increasing the grafting yield (GY). The possible explanation was that the quaternary ammonium groups introduced affected the crystallization process of the FPP in two opposite directions, i.e. promoting the nucleation and hindering the transport of the chain molecules towards the growing nuclei. Polarized optical micrographs showed that the DMC chains acted as nucleating agents, which accelerated the nucleation. In addition, the results showed the FPP had lower nucleation free energy than the PP. This study would be useful for designing the processing parameters of the grafted samples.

• Bulletin of the Korean Chemical Society
• /
• 제31권4호
• /
• pp.829-834
• /
• 2010

Ligand variation was carried out on a cobalt(III) complex of Salen-type ligand comprised of 1,2-cyclohexenediamine and salicylaldehyde bearing a methyl substituent on 3-position and -[$CMe(CH_2CH_2CH_2N^+Bu_3)_2$] on 5-position, which is a highly active catalyst for $CO_2$/propylene oxide copolymerization. Replacement of the methyl substituent with bulky isopropyl group resulted in alteration of the binding mode, consequently lowering turnover frequency significantly. Replacement with an ethyl group preserved binding mode and activity. Replacement of the tributylammonium unit with trihexylammonium or trioctylammonium, or replacement of 1,2-cyclohexenediamino unit with -$NC(Me)_2CH_2N$- decreased activity, even though the binding mode was unaltered.

• 한국안전학회지
• /
• 제6권4호
• /
• pp.13-20
• /
• 1991

Ion-selective electrode responsive to the thiocynate ion prepared by using the quaternary ammonium salts as a active material and PVC as a membrane matrix. The effect of chemical structure and composition of active material, and the membrane thickness on the linear response. the detection limit, and Nernstian slope of the electrode studied. Under the above optimum conditions of membrane, the effect of pH and the selectivity coefficients to various interfering anions were compared and investigated. It was concluded that the functions of thiocynate ion-selective electrode(ISE) were closely related to the chemical structure of the quaternary ammonium salts. The linear response, and the detection limit of the electrode potential increased with the increase of the carbon chain length of the alkyl group in the quaternary ammonium salts in the ascending order of Aliquat 336T, TOAT, TDAT, and TDDAT. The optimum membrane thickness was 0.3mm. The electrode characteristics was better with the decrease of the concentration of active material, and the best concentration was 3 weight percent. The membrane potential was independent of the pH variation in the region from pH 2 to 12. The order of the selectivity coefficients is as follows：Cl $O_4$$^{[-10]}$ ＞ $I^{[-10]}$ ＞N $O_3$$^{[-10]}$ ＞B $r^{[-10]}$ ＞ $F^{[-10]}$ ＞C $l^{[-10]}$ ＞O $A_{c}$ $^{[-10]}$ 〓S $O_4$$^{2-}$.

• 폴리머
• /
• 제30권3호
• /
• pp.224-229
• /
• 2006

3-Aminopropyldimethylethoxysilane (AS)과 methyliodide를 이용하여 4차 암모늄 실란을 제조하고 7,7,8,8-tetracyanoquinodimethane (TCNQ)과 methyliodide 및 요오드화 리튬을 이용하여 $Li^+TCNQ^-$를 제조하였다. 제조한 4차 암모늄 실란에 $Li^+TCNQ^-$를 가하여 4차 암모늄 실란-TCNQ adduct(ST)를 제조하고 이를 말단에 OH기를 갖는 poly(dimethylsiloxane) (PDMS)과 축합반응시켜 poly(dimethylsiloxane)-ST adduct(PST)를 제조하였다. PST 변성 말레화 폴리에틸렌(PST-g-MPE)은 말레화 폴리에틸렌과 PST를 internal mixer(Rheomix 600P)를 사용하여 용융중합으로 제조하였으며 여기에 카본블랙 (CB)의 함량을 변화시켜 PST-g-MPE/CB 및 MPE/CB 복합체를 제조하였다. 제조한 복합체의 열적 특성을 측정한 결과 유사한 열분해 온도를 나타내었다. PST-g-MPE/CB 복합체의 인장강도는 카본블랙의 함량 증가에 따라 $200\sim308MPa$로 증가하였으며 모폴로지를 측정한 결과 MPE/CB 복합체보다 PST-g-MPE/CB 복합체의 경우에서 카본블랙의 분산이 보다 더 잘 이루어졌음을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제19권3호
• /
• pp.273-275
• /
• 1998

• Bulletin of the Korean Chemical Society
• /
• 제28권12호
• /
• pp.2299-2302
• /
• 2007

A series of quaternary ammonium-based ionic liquids (ILs) containing an alkyl carbonate group on the cation was first prepared and their physical and electrochemical properties including density, viscosity, thermal stability, electrochemical stability, and ionic conductivity were reported. These ILs exhibited wide electrochemical windows of at least 5.0 V and relatively high conductivities. In contrast to dialkyl-substituted ionic liquids, the ILs with an alkyl carbonate group on the cation showed much smaller drop in conductivities when mixed with a lithium salt, due to the interaction of lithium ions with carbonate groups. Upon interaction with a Li salt, the carbonyl stretching frequency of the carbonate group shifted to a lower frequency whereas the peak associated with C-O single bond moved to a higher frequency.