• 한국ITS학회 논문지
• /
• 제13권2호
• /
• pp.12-26
• /
• 2014

이 연구에서는 교통사고 영향요인 중 야간의 시인성 저하가 교통사고 발생에 미치는 영향을 진단하였다. 연구를 위해 경기지역의 경부선, 서해안선, 영동선, 서울외곽순환고속도로의 기본구간을 58개의 소구간으로 분할하였고, 2009년에서 2012년 상반기까지 소구간에서 발생한 교통사고 410건을 이용하여 야간의 어두움으로 인한 시인성 저하가 교통사고에 미치는 영향을 진단하였다. 실험방법은 준실험설계를 준용하여 시인성 외 교통사고에 영향을 주는 변인을 통제하고 음이항 회귀분석을 활용하였다. 조사 결과, 맑음 기상조건에서의 LOS A 상태 등 특정조건에서 주간과 야간의 시인성 차이가 교통사고 발생에 유의한 영향을 미치는 것으로 진단되었다. 그리고 진단 결과를 이용하여 교통사고의 유형과 원인에 대하여 다양한 분석을 시도하였다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 추계학술대회 논문집(제1권)
• /
• pp.425-431
• /
• 2006

부산항(북항) 재개발사업은 노후화된 북항 일반부두를 해양관광의 중심지역 그리고 부산시민을 위한 친수공간으로 개발하기 위해 그동안 많은 연구와 노력이 진행되어 왔으며, 현재 구체적인 방안이 모색되는 실행단계로 진입하였다. 한편, 재개발로 인한 유동장 및 해수교환의 변화는 환경적인 측면에서 중요한 검토사항 중 하나이다. 본 연구에서는 북항 재개발에 따른 일반적인 자료를 수집 ${\cdot}$ 분석하고, 이를 바탕으로 하여 재개발에 따른 유동장의 변화와 만내수의 해수교환을 수치실험으로 검토하였다. 실험결과, 조류속 변화는 북항 및 내항에서 감소가 나타나고 주수로상에서 증가가 나타나고 있다. 해수교환 변화는 15일이 지난 준정상상태에서 재개발 전후 공히 약77% 내외에 달하는 것으로 나타났다.

• 한국위성정보통신학회논문지
• /
• 제5권1호
• /
• pp.80-84
• /
• 2010

위성 구조계의 가장 기본적인 임무 및 역할은, 우선 위성 자체의 미션 및 기능을 위해 필요한 여러 탑재체 및 장비들을 장착하고 지지할 수 있는 공간을 제공하고, 발사 시에 발생하는 이런 극심한 발사환경 하중에서 위성체 및 탑재체들을 안전하게 보호하는 것이다. 위성체가 발사체에 실려 발사될 때에 매우 높은 가속도에 의한 정적하중 및 공기의 저항에 의한 하중, 연소 가스 분출 시 발생하는 음향에 의한 하중, 발사체로부터 분리될 때 발생하는 충격 하중 등 여러 가지의 극심한 하중을 겪게 된다. 이런 여러 발사환경 중, 저주파 동적 하중 환경의 검증을 위한 정현파 가진 시험 시에 주요 탑재체 및 장비들의 고유모드에서 과도한 하중이 가해지는 것을 피하기 위해 정현파 가진 규격에 노칭을 적용하게 된다. 본 논문은 정현파 가진 시험을 주요 내용으로 하며, 시험을 수행하기 위한 노칭된 예측 입력하중과 실제 시험에 사용된 입력하중을 비교하여 유한요소모델 및 예측의 정확성을 확인해 보고자 한다.

• 한국분말재료학회지
• /
• 제9권6호
• /
• pp.394-408
• /
• 2002

Nanostructured high strength metastable Al-, Mg- and Ti-based alloys containing different amorphous, quasicrystalline and nanocrystalline phases are synthesized by non-equilibrium processing techniques. Such alloys can be prepared by quenching from the melt or by powder metallurgy techniques. This paper focuses on one hand on mechanically alloyed and ball milled powders containing different volume fractions of amorphous or nano-(quasi)crystalline phases, consolidated bulk specimens and, on the other hand. on cast specimens containing different constituent phases with different length-scale. As one example. $Mg_{55}Y_{15}Cu_{30}$- based metallic glass matrix composites are produced by mechanical alloying of elemental powder mixtures containing up to 30 vol.% $Y_2O_3$ particles. The comparison with the particle-free metallic glass reveals that the nanosized second phase oxide particles do not significantly affect the glass-forming ability upon mechanical alloying despite some limited particle dissolution. A supercooled liquid region with an extension of about 50 K can be maintained in the presence of the oxides. The distinct viscosity decrease in the supercooled liquid regime allows to consolidate the powders into bulk samples by uniaxial hot pressing. The $Y_2O_3$ additions increase the mechanical strength of the composites compared to the $Mg_{55}Y_{15}Cu_{30}$ metallic glass. The second example deals with Al-Mn-Ce and Al-Cu-Fe composites with quasicrystalline particles as reinforcements, which are prepared by quenching from the melt and by powder metallurgy. $Al_{98-x}Mn_xCe_2$ (x =5,6,7) melt-spun ribbons containing a major quasicrystalline phase coexisting with an Al-matrix on a nanometer scale are pulverized by ball milling. The powders are consolidated by hot extrusion. Grain growth during consolidation causes the formation of a micrometer-scale microstructure. Mechanical alloying of $Al_{63}Cu_{25}Fe_{12}$ leads to single-phase quasicrystalline powders. which are blended with different volume fractions of pure Al-powder and hot extruded forming $Al_{100-x}$$(Al_{0.63}Cu_{0.25}Fe_{0.12})_x$ (x = 40,50,60,80) micrometer-scale composites. Compression test data reveal a high yield strength of ${\sigma}_y{\geq}$700 MPa and a ductility of ${\varepsilon}_{pl}{\geq}$5% for than the Al-Mn-Ce bulk samples. The strength level of the Al-Cu-Fe alloys is ${\sigma}_y{\leq}$550 MPa significantly lower. By the addition of different amounts of aluminum, the mechanical properties can be tuned to a wide range. Finally, a bulk metallic glass-forming Ti-Cu-Ni-Sn alloy with in situ formed composite microstructure prepared by both centrifugal and injection casting presents more than 6% plastic strain under compressive stress at room temperature. The in situ formed composite contains dendritic hcp Ti solid solution precipitates and a few $Ti_3Sn,\;{\beta}$-(Cu, Sn) grains dispersed in a glassy matrix. The composite micro- structure can avoid the development of the highly localized shear bands typical for the room temperature defor-mation of monolithic glasses. Instead, widely developed shear bands with evident protuberance are observed. resulting in significant yielding and homogeneous plastic deformation over the entire sample.

• 기본간호학회지
• /
• 제5권1호
• /
• pp.107-124
• /
• 1998

Based on King's goal attainment theory, this research deals with applying nursing intervention of mutual goal settings to gastrectomy patients. It tests the effects of nursing intervention, according to the patients' health locus of control, suggested as external boundary criteria for the theory by employing a quasi-experimental design which consists of a pretest-posttest non-equivalent control and experimental groups. The subjects of this research were 62 gastrectomy patients hospitalized at Y medical center and the experimental and control groups consisted of 31 subjects. The experimental group received nursing intervention at the mutual goal setting of 5 times from the day before the surgery to the 5th day after the surgery, while the control group received only routine nursing care. Recovery indicators of both groups were measured and compared. Measurement variables included patients' characteristics, health locus of control, forced vital capacity, forced expiratory volume in one second, peak expiratory flow, bowel movement recovery, mobility recovery, level of pain, patients' stress and patients' satisfaction. Data were analyzed using SPSS statistical package and the hypotheses were tested by ANOVA and ANCOVA. Results of the analyses are summarized as follows : 1) Internal health locus of control had higher effects of the nursing intervention of mutual goal setting than external health locus of control on pulmonary ventilatory functions of forced vital capacity, forced expiratory volume in one second, and peak expiratory flow. 2) There was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the bowel movement recovery between the internal and external health locus of control. 3) There was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the mobility recovery between the internal and external health locus of control. 4) There was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the level of pain between the internal and external health locus of control. 5) There was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the level of stress between the internal and external health locus of control. 6) There was a statistically significant difference in the effects of nursing intervention of mutual goal setting on the level of satisfaction with provision of nursing information between the internal and external health locus of control, and there was no statistically significant difference in the effects of nursing intervention of mutual goal setting on the level of satisfaction with outcome of nursing between the internal and external locus of control. On the basis of the research results, the following are recommended : 1) Repeated research on responses to health locus of control is necessary. 2) Not only the effectiveness of nursing intervention in acute recovery periods, but also the long term effects are to be investigated. 3) The development of instruments is needed to accurately measure mutual goal setting regarding postoperative deep breath, coughing, early ambulation, etc. so that the relationship among the postoperative recovery indicators may be explored. 4) It is required that an instrument be developed to measure perception which facilitates goal attainment in the interactive setting between patients and nurses.

• 한국전산구조공학회논문집
• /
• 제23권1호
• /
• pp.81-94
• /
• 2010

본 연구는 선형 상보법으로 초고강도 섬유보강 콘크리트 I형보의 파괴역학적 해석을 수치해석으로 수행하였다. 기존의 보통강도 콘크리트에 대한 유사 취성 파괴역학적 수치해석을 기반으로 초고강도 섬유보강 콘크리트 재료역학적 구성모델파괴 면에 인장경화 관계를 도입함으로써 초고강도 섬유보강 콘크리트 I형 거더 해석을 개선시켰다. 상수변형률 삼각형 요소에 꼭지점 또는 요소의 중앙점 절점을 배제하고 요소의 변에 절점을 배치한 결합된 삼각형 요소를 사용하였다. 인장영역에서는 경화/연화 파괴역학적 구성모델을, 전단영역에서는 연화 파괴역학적 구성모델을, 경계절점의 압축에 대해서는 연화파괴역학적 구성모델을 사용하여 파괴역학적 해석을 수행하였다. Non-holonomic rate 형태로 경로에 의존적인 경화연화거동을 LCP로 방정식을 구성하였으며, 그 해는 PATH를 사용해서 구하였다. Piece-wise 비탄성 항복-파괴면은 두 개의 압축 caps, 두 개의 Mohr-Coulomb 파괴면, 인장항복면과 인장파괴면 등으로 구성하였다. 초고강도 섬유보강 콘크리트 거더의 변형거동과 파괴 상태와 비교하여 이 수치해석 방법에 대한 유효성을 검증하였다.

• 한국연극학
• /
• 제48호
• /
• pp.85-125
• /
• 2012

Geun Hyung Park is one of the playwrights who consistently pursues his unique world of play. One of the characteristics that is constantly discovered in Park's plays is the motif of 'family.' Park chooses family as the motif in most of his work. Park particularly emphasizes 'family life' rather than 'individual life' to focus on the internal problems of families. Therefore, the motif of family in Park's plays takes a very important position in the content and theme. The Korean society imposes unique value on families and possesses a strictly obstinate family ideology. Park observes distorted family relations or individuals who cannot be happy within their families to identify the problems related to the family ideology that is deeply rooted in the Korean society. This is one of the important backgrounds for which Park is constantly dealing with 'family life.' This study selected five of Park's most famous plays to specifically examine Park's critical understanding of family ideology. First, his criticizes extreme family egoism by depicting a family that cannibalizes people to keep the family full. Park chooses 'absurd time and space' and the extreme subject of 'human flesh' to warn his audiences about the awful consequences of family egoism. His , which is the only piece that deals with family history among the five pieces selected, criticizes Korea's unique family-centered ideology by humorously depicting the history of the Cho family that is all about maintaining and worshipping the its clan. He reveals the unethical and hypocritical attitudes of the Cho family for the audiences to reconsider the family-centered ideology of the Korean society. In , he talks about the son and the father who lose his ethical authority and fail to perform his paternal responsibilities to criticize the traditional family ideology of patriarchism and suggests the pessimistic future of patriarchism. contrasts a blood-related family with an irresponsible father and a quasi-family to criticize the identity of blood-related families. In , Park depicts a 'smelly house' of a family in agonizing relations to deny the family myth and the maternal myth. He clearly shows how the ideals of family myth and maternal myth are distant from the reality. In result of this study, Park's criticism of family ideology appears in various forms. He comprehensively criticizes both the general family problems and the unique family issues of Korea. The family ideology of Korea is currently undergoing a radical change. It has been long since the traditional family ideologies have exposed problems to show the signs of crisis. Also, there have emerged various forms of families, including single-parent families, one-person families, adoption families, and multi-cultural families. In this respect, Park's critical understanding of family ideologies allows you to see the obvious family forms from a new perspective and greatly contributes to awakening the essential questions about families. Park's work is noticeable among the various artistic and literature pieces that deal with family issues because of his extraordinary skills to capture the key issues inherent in the problems of family ideologies.