• Journal of the Korea Institute of Building Construction
• /
• v.5 no.1 s.15
• /
• pp.63-68
• /
• 2005

Generally, aggregate may limit the workability, strength and durability of concrete, and good concrete cannot be made with aggregate of bad property including low strength, bad shape and grading. But recently, it has been insufficient in quantity to collect good natural aggregate because of exhaustion of aggregate resources. In case of Korea, the using ratio of crushed stone occupies about 97 percent of total coarse aggregate, and ratio of crushed sand occupies about 18.3 percent of total fine aggregate. This is an experimental study to compare and analyze the properties of crushed sand for concrete in capital region and concrete according to the replacement ratio of crushed sand to improve quality and mix design of concrete using crushed sand. According to test results, it was found that nearly all the properties of crushed sand satisfied with the value recommended by KS. And it is recommended that FM of crushed sand should be lowered by improvement of manufacture system or grading adjustment should be used because FM of crushed sand was a bit higher.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2001.12a
• /
• pp.65-68
• /
• 2001

Short shot is a molded part that is incomplete since insufficient material was injected into the mold. Remedial actions to solve short shot can be done by injection molding experts based on their empirical knowledge. Modifying mold and part, changing resin to less viscous one, and adjusting process conditions are general remedies. Experts of injection molding might try to adjust process conditions such as mold temperature, melt temperature, injection time based on their empirical knowledge as the first remedy because adjustment of process conditions is the most economic way in time and cost. However it is difficult to find appropriate process conditions as they are highly coupled and there are so many elements to be considered. In this paper, a fuzzy logic algorithm has been proposed to find an appropriate mold temperature. With the percentage of the insufficient Quantity of an injection molded part, an appropriate mold temperature can be obtained by the fuzzy logic algorithm.

• Journal of Fisheries and Marine Sciences Education
• /
• v.27 no.1
• /
• pp.74-82
• /
• 2015

The Admission Officer System is a selecting system that evaluates potential and talent of students in multiple aspects and selects whom each university wants to pick and fits the specific recruitment units. However, the issue about fairness of the system has been discussed continually. This study conducted online survey, using fairness checklist with 31 universities to know how admission officers perceive the fairness of the system and secure that. Also, three times of expert FGI were conducted, too. The result shows there are still many universities that adjustment for deviated evaluation in interview, separation of operating agency, stabilization of the statue of admission officers, analyzation of each evaluator's tendency, and so on are not achieved well. To assure the fairness of the admission officer system, securing validity by clearly defining the concept of fairness is proposed first. Stabilizing the statue of admission officers and continuous education training for them is also proposed to improve their professionality. Furthermore, expansion of education programs about the admission officer system in both quantity and quality is suggested for fairness of the system.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.2 no.1
• /
• pp.49-52
• /
• 2002

Short shot is a molded part that is incomplete since insufficient material was injected into the mold. Remedial actions to solve short shot can be dune by injection molding experts based on their empirical knowledge. Modifying mold and part, changing resin to less viscous one, and adjusting process conditions are general remedies. Experts of injection molding might try to adjust process conditions such as mold temperature, melt temperature, injection time based on their empirical knowledge as the first remedy because adjustment of process conditions is the most economic way in time and cost. However it is difficult to find appropriate process conditions as they are highly coupled and there are so many elements to be considered. In this paper, a fuzzy logic algorithm has been proposed to find an appropriate mold temperature. With the percentage of the insufficient quantity of an injection molded part, an appropriate mold temperature can be obtained by the fuzzy logic algorithm.

• Journal of Environmental Impact Assessment
• /
• v.10 no.3
• /
• pp.245-255
• /
• 2001

The management of water, both the quantity and the quality, has been one of the most important issues in the public investment and it is equally true in the field of sustainable development. Nevertheless, the jurisdiction of local governments has been delineated without much attention to the issue of the water management. In the planning of wide areas such as cities, countries, the metropolis, and the megalopolis, it is necessary to well arrange the geographical jurisdiction of local governments as a unit of region. The river water system, including small streams to large rivers, should be given its due share in the planning and jurisdictional delineation. The traditional concept of the local government's jurisdiction emphasizing the accessibility may be fading away. Instead, the efficiency of the public management would be the main concept in determining the jurisdiction of local governments. The river improvement, the waterworks, the sewage, the maintenance of water quality, the space of water recreation, are relatively important in the efficient management of that area. This paper argues for the equalization between the geographical jurisdiction of local governments and watersheds. To this end, I do case studies of the local governments areas such as Ri(里), Eup Myon(邑 面), Si Gun(市 郡), KyangyokSi Do(廣域市 道). The study interprets ARS will be one of the principles of land use and the reorganization of the local jurisdiction in the future as a geo-systematic and the eco-systematic criteria.

• KDI Journal of Economic Policy
• /
• v.32 no.4
• /
• pp.35-73
• /
• 2010

This paper examines consumption dynamics in relation to asset prices in Korea. Empirical analysis based on the error correction model shows that personal consumption is affected by changes in asset prices but the consumption converges to the long-run level of consumption corresponding to the total income flow in two years. This adjustment in consumption implies that the consumption error, reflected in the error correction term, should have predictability for the future consumption growth during the adjustment period. It is found that the error correction term has a long-run predictability for consumption over up to about 3 years; thus, confirming the error correction model. It is also found that housing prices have larger effects on consumption compared with stock prices in Korea. In addition, the effects of income and asset prices on consumption show bigger effects during contractionary period than expansionary period in business cycles. This paper also analyzes effects of asset wealth that reflects changes in both price and quantity. It is found that asset wealth has a long-run effect on consumption in addition to total income as determinants of consumption. Since wealth effects usually indicate the long-run effect of changes in asset wealth on consumption that is not explained by labor income, which is the proxy for human source of wealth, it is estimated with labor income used as a control variable. According to the estimation, the marginal propencity to consume out of asset wealth is approximately 2%. It means that 1,000won increase in asset wealth may lead to 20 won increase in consumption.

• Archives of design research
• /
• v.13 no.1
• /
• pp.121-130
• /
• 2000

This study can be expressed by gathered and formed into the exhibition space's structure practical progress/ application. For the one model of fascinating exhibition's space thru inter-space's pertinent adjustment, production between spactator and exhibition constituent on an exhibition story-line, I adjusted the focus to follow mentioned methods systematically for the example; An exhibition space is completed to be very impressive and attractive space by proper adjustment and production of M-M/C interface in exhibition storyline. Quantity space is transfered into quality space through the transmission of an exhibition which can be define as the point of an exhibition structure. And also could de transferd into a bodily sensation space that inherent full of interactive constituent. Changeable exhibition constituents (exhibition item and text) that sporadically expatiated (not trimed, the original form) in the process of an exhibition structure draw much higer quality of the optimal solution in optimize process which is given when aggregate again to contextual flow of synthetic exhibition scenario. Reconstruction of individual exhibition constituents to the new story, that is, transference of exhibition text to exhibition context is inspirit to an exhibition by maximize the exhibition effect in connection can be systematized through carrying out an outcentripetalpart. However, since pattern of an exhibition structure that consequtively meet variety spacetime of an exhibittion environmental can't be exist, this study presents centralizing the exhibition plan of Korea communication pavilion of the annual Expo Comm Wireress Korea, sustained process from design proposal, research and analysis to synthesis, development, transmission and management to an example of an applying crystallization.

• The Journal of the Korea Contents Association
• /
• v.9 no.6
• /
• pp.256-265
• /
• 2009

Laser output becomes output adjustment from 20 w to 100 w consecutively and time of exposure is available adjustment through water plant in 0.01 seconds. Pulse action can intercept laser beam periodically and supermarket pulse 0.1 $\sim$ between 1ms discharge consist and momentary laser output is increased to 5 $\sim$ 10. Specially, that must remove malignancy cell in womb nine escarps in the case of uterine cancer first of all stability of tube output about pulse by weight very, stable soft switching action area is defined without high frequency transformer leakage inductance ($L_1$) increase and additional series inductor insertion to converter the first main circuit securing zero voltage and marks of switching action in this research specially, because circulation current path of inductor ($L_f$) current is intercepted, converter the first main circuit switching component and spiritual enlightenment damage of high frequency transformer take decreasing greatly and high frequency the second stoppage department ($D_5,\;D_6$) becomes soft switching, and also, switching damage absorption quantity characteristic that can come to life again as subordinate have, and to become tube stabilization design and result that manufacture and experiment, brought result that improve of 10% than existing equipment, and if supplement as systematic late, it becomes thought to get into superior result.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.103-110
• /
• 2009

A construction project consists of a variety of contracts for the completion of work. The large number of contracts involved in a single project increases the likelihood that disputes will arise between the parties involved regarding the terms of service. Actually, there are many disputes that are caused by a change 0 order. While such disputes should be settled by interpreting the terms stipulated in the agreement entered between the two parties, the process of dispute settlement is often restricted to arbitration and lawsuit, and as a result the parties tend to avoid it due to its inefficiency. For this reason, in Korea it is hard to find cases of interpreting terms of service, while in the U.S. it is easy to find diverse cases of interpreting terms of service, since there is a process of dispute settlement by each stage by the party who has placed an order. Therefore, this study presents analysis of case studies of contract changes, looking specifically at changes in the scope of the work, changes in quantity, changes in the period of implementation, changes in the method of implementation or attitude, changes in items provided by the government or the delivery place, and the acceptance of such change procedure by a contractor, and the adjustment of a reduction.

• Journal of the Korean Geotechnical Society
• /
• v.19 no.6
• /
• pp.189-206
• /
• 2003

During tunnel excavation in urban area a systematic monitoring is important for the purpose of determination of support type and quantity, as well as for the control of stability of both surface structures and the tunnel itself due to the frequently, and in many cases, abruptly changing ground condition. In Austria absolute displacement monitoring methods have replaced relative displacement measurements by geodetic methods to a large extent. Prompt detection of weak ground ahead of the tunnel face as well as better adjustment of excavation and support to the geotechnical conditions is possible with the help of the improved methods of data evaluation on sites. Deformation response of the ground to excavation starts ahead of the tunnel face, therefore, the deformation and state of the tunnel advance core is the key factor of the whole deformation process after excavation. In other words, the rigidity and state of the advance core play a determining role in the stability of both surface structures and the tunnel itself. This paper presents the results from detailed three-dimensional numerical studies, exploring vertical displacements, vector orientations and extrusions on tunnel face during the progressive advancement for the shallow tunnel in various geotechnical conditions.