• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.172-187
• /
• 2019

Knowledge of intangible cultural heritage is usually disseminated through word-of-mouth and actions rather than written records. Thus, people assemble to teach others about it and form communities. Accordingly, to understand and spread information about intangible cultural heritage properly, it is necessary to understand not only their attributes but also a community's relational characteristics. Community members include specialized transmitters who work under the auspices of institutions, and general transmitters who enjoy intangible cultural heritage in their daily lives. They converse about intangible cultural heritage in close relationships. However, to date, research has focused only on professionals. Thus, this study focused on the roles of general transmitters of intangible cultural heritage information by investigating intangible cultural heritage communities centering around Jeongseon Arirang; a social network analysis was performed. Regarding the research objectives presented in the introduction, the main findings of the study are summarized as follows. First, there were 197 links between 74 members of the Jeongseon Arirang Transmission Community. One individual had connections with 2.7 persons on average, and all were connected through two steps in the community. However, the density and the clustering coefficient were low, 0.036 and 0.32, respectively; therefore, the cohesiveness of this community was low, and the relationships between the members were not strong. Second, 'Young-ran Yu', 'Nam-gi Kim' and 'Gil-ja Kim' were found to be the prominent figures of the Jeongseon Arirang Transmission Community, and the central structure of the network was concentrated around these three individuals. Being located in the central structure of the network indicates that a person is popular and ranked high. Also, it means that a person has an advantage in terms of the speed and quantity of the acquisition of information and resources, and is in a relatively superior position in terms of bargaining power. Third, to understand the replaceability of the roles of Young-ran Yu, Nam-gi Kim, and Gil-ja Kim, who were found to be the major figures through an analysis of the central structure, structural equivalence was profiled. The results of the analysis showed that the positions and roles of Young-ran Yu, Nam-gi Kim, and Gil-ja Kim were unrivaled and irreplaceable in the Jeongseon Arirang Transmission Community. However, considering that these three members were in their 60s and 70s, it seemed that it would be necessary to prepare measures for the smooth maintenance and operation of the community. Fourth, to examine the subgroup hidden in the network of the Jeongseon Arirang Transmission Community, an analysis of communities was conducted. A community refers to a subgroup clearly differentiated based on modularity. The results of the analysis identified the existence of four communities. Furthermore, the results of an analysis of the central structure showed that the communities were formed and centered around Young-ran Yu, Hyung-jo Kim, Nam-gi Kim, and Gil-ja Kim. Most of the transmission TAs recommended by those members, students who completed a course, transmission scholarship holders, and the general members taught in the transmission classes of the Jeongseon Arirang Preservation Society were included as members of the communities. Through these findings, it was discovered that it is possible to maintain the transmission genealogy, making an exchange with the general members by employing the present method for the transmission of Jeongseon Arirang, the joint transmission method. It is worth paying attention to the joint transmission method as it overcomes the demerits of the existing closed one-on-one apprentice method and provides members with an opportunity to learn their masters' various singing styles. This study is significant for the following reasons: First, by collecting and examining data using a social network analysis method, this study analyzed phenomena that had been difficult to investigate using existing statistical analyses. Second, by adopting a different approach to the previous method in which the genealogy was understood, looking at oral data, this study analyzed the structures of the transmitters' relationships with objective and quantitative data. Third, this study visualized and presented the abstract structures of the relationships among the transmitters of intangible cultural heritage information on a 2D spring map. The results of this study can be utilized as a baseline for the development of community-centered policies for the protection of intangible cultural heritage specified in the UNESCO Convention for the Safeguarding of Intangible Cultural Heritage. To achieve this, it would be necessary to supplement this study through case studies and follow-up studies on more aspects in the future.

• Journal of Intelligence and Information Systems
• /
• v.24 no.3
• /
• pp.67-88
• /
• 2018

Until recently, as we recognize the significance of sustainable growth and competitiveness of small-and-medium sized enterprises (SMEs), governmental support for tangible resources such as R&D, manpower, funds, etc. has been mainly provided. However, it is also true that the inefficiency of support systems such as underestimated or redundant support has been raised because there exist conflicting policies in terms of appropriateness, effectiveness and efficiency of business support. From the perspective of the government or a company, we believe that due to limited resources of SMEs technology development and capacity enhancement through collaboration with external sources is the basis for creating competitive advantage for companies, and also emphasize value creation activities for it. This is why value chain network analysis is necessary in order to analyze inter-company deal relationships from a series of value chains and visualize results through establishing knowledge ecosystems at the corporate level. There exist Technology Opportunity Discovery (TOD) system that provides information on relevant products or technology status of companies with patents through retrievals over patent, product, or company name, CRETOP and KISLINE which both allow to view company (financial) information and credit information, but there exists no online system that provides a list of similar (competitive) companies based on the analysis of value chain network or information on potential clients or demanders that can have business deals in future. Therefore, we focus on the "Value Chain Network System (VCNS)", a support partner for planning the corporate business strategy developed and managed by KISTI, and investigate the types of embedded network-based analysis modules, databases (D/Bs) to support them, and how to utilize the system efficiently. Further we explore the function of network visualization in intelligent value chain analysis system which becomes the core information to understand industrial structure ystem and to develop a company's new product development. In order for a company to have the competitive superiority over other companies, it is necessary to identify who are the competitors with patents or products currently being produced, and searching for similar companies or competitors by each type of industry is the key to securing competitiveness in the commercialization of the target company. In addition, transaction information, which becomes business activity between companies, plays an important role in providing information regarding potential customers when both parties enter similar fields together. Identifying a competitor at the enterprise or industry level by using a network map based on such inter-company sales information can be implemented as a core module of value chain analysis. The Value Chain Network System (VCNS) combines the concepts of value chain and industrial structure analysis with corporate information simply collected to date, so that it can grasp not only the market competition situation of individual companies but also the value chain relationship of a specific industry. Especially, it can be useful as an information analysis tool at the corporate level such as identification of industry structure, identification of competitor trends, analysis of competitors, locating suppliers (sellers) and demanders (buyers), industry trends by item, finding promising items, finding new entrants, finding core companies and items by value chain, and recognizing the patents with corresponding companies, etc. In addition, based on the objectivity and reliability of the analysis results from transaction deals information and financial data, it is expected that value chain network system will be utilized for various purposes such as information support for business evaluation, R&D decision support and mid-term or short-term demand forecasting, in particular to more than 15,000 member companies in Korea, employees in R&D service sectors government-funded research institutes and public organizations. In order to strengthen business competitiveness of companies, technology, patent and market information have been provided so far mainly by government agencies and private research-and-development service companies. This service has been presented in frames of patent analysis (mainly for rating, quantitative analysis) or market analysis (for market prediction and demand forecasting based on market reports). However, there was a limitation to solving the lack of information, which is one of the difficulties that firms in Korea often face in the stage of commercialization. In particular, it is much more difficult to obtain information about competitors and potential candidates. In this study, the real-time value chain analysis and visualization service module based on the proposed network map and the data in hands is compared with the expected market share, estimated sales volume, contact information (which implies potential suppliers for raw material / parts, and potential demanders for complete products / modules). In future research, we intend to carry out the in-depth research for further investigating the indices of competitive factors through participation of research subjects and newly developing competitive indices for competitors or substitute items, and to additively promoting with data mining techniques and algorithms for improving the performance of VCNS.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2A
• /
• pp.129-136
• /
• 2011

Recently studies on functional concrete with a photocatalytic material such as $TiO_2$ have actively been carried out in order to remove air pollutants. The absorbtion of $TiO_2$ from those studies is applied by it being directly mixed into concrete or by suspension coated on the surface. When it comes to the effectiveness, the former process is less than that of the latter compared with the $TiO_2$ use. As a result, the direct coating of $TiO_2$ on materials' surface is more used for effectiveness. The Surface spread of it needs to have a more than $400^{\circ}C$ heat treat done to stimulate the activation and adhesion of photocatalysis. Heat treat consequently leads hydration products in concrete to be dehydrated and shrunk and is the cause of cracking. The study produces $TiO_2$ used Sol-gel method which enables it to be coated with a low temperature treat, applies it to pearlite using Lightweight Aggregate Concrete fixed with a low temperature treat and evaluates the spread performance of it. In addition to this, the size of pearlite is divided into two types: One is 2.5 mm to 5.0 mm and the other is more than 5.0 mm for the benefit of finding out the removal characteristics of $CH_3CHO$ whether they are affected by pearlite size, mixing method and ratio with $TiO_2$ and elapsed time. The result of this experiment shows that although $TiO_2$ produced by Sol-gel method is treated with 120 temperature, it maintains a high spread rate on the XRF(X ray Florescence) quantitative analysis which ranks $TiO_2$ 38 percent, $SiO_2$ 29 percent and CaO 18 percent. In the size of perlite from 2.5 mm to 5.0 mm, the removal characteristic of $CH_3CHO$ from a low temperature heated Lightweight concrete appears 20 percent higher when $TiO_2$ with Sol-gel method is spreaded on the 7 percent of surface. In other words, the removal rate is 94 percent compared with the 72 percent where $TiO_2$ is mixed in 10 percent surface. In more than 5.0 mm sized perlite, the removal rate of $CH_3CHO$, when $TiO_2$ is mixed with 10 percent, is 69 percent, which is similar with that of the previous case. It suggests that the size of pearlite has little effects on the removal rate of $CH_3CHO$. In terms of Elapsed time, the removal characteristic seems apparent at the early stage, where the average removal rate for the first 10 hours takes up 84 percent compared with that of 20 hours.

• The Journal of Korean Society for Radiation Therapy
• /
• v.25 no.2
• /
• pp.131-136
• /
• 2013

Purpose: Quantitative comparative evaluation of the difference in eye lens absorbed dose when measured by MVCT and kV-CBCT, though such a dose was not included in the original IMRT treatment plan for the nasopharyngeal cancer patient. Materials and Methods: We used CT (Lightspeed Ultra 16, General Electric, USA) against an Anderson rando phantom (Alderson Research Laboratories Inc, USA) and established the plan for tomotherapy treatment (Tomotherapy, Inc, USA) and linear accelerator treatment (Pinnacle 8.0, Philips Medicle System) for the achieved CT images on the same condition with the nasopharyngeal cancer patient treatment plan. Then, align the ther-moluminescence dosimeter (TLD100 Harshaw, USA) with the eye lens, shot the lens with Tomotherapy MVCT under 3 conditions (Fine, Normal, and Coarse), and shot both lenses with kV-CBCT under 2 conditions (Low Dose Head and Standard Dose Head) 3 times each. Results: When we analyzed the eye lens absorbed dose according to MVCT and kV-CBCT images by using both Tomotherapy and Pinacle 8.0, we achieved the following result; According to Tomotherapy MVCT, RT 0.8257 cGy in the Coarse mode, LT 0.8137 cGy, RT 1.089 cGy and LT 1.188 cGy in the Normal mode, and RT 2.154 cGy and LT 2.082 cGy in the Fine mode. According to Pinacle 8.0 kV-CBCT, RT 0.2875 cGy and LT 0.1676 cGy in the Standard Dose mode and RT 0.1648 cGy and LT 0.1212 cGy in the Low-Dose mode. In short, the MVCT result was significantly different from that of kV-CBCT, up to 20 times. Conclusion: We think kV-CBCT is more effective for reducing the amount of radiation which a patient is receiving during intensity modulated radiation treatment for other purposes than treatment than MVCT, when we consider the absorbed dose only from the viewpoint of image-guided radiation therapy. Besides, we understood the amount of radiation is too sensitive to the shooting condition, even when we use the same equipment.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.18 no.4
• /
• pp.81-99
• /
• 2015

The acceleration of global warming has required better understanding of carbon cycles over local and regional areas such as the Korean peninsula. Since forests serve as a carbon sink, which stores a large amount of terrestrial carbon, there has been a demand to accurately estimate such forest carbon sequestration. In Korea, the National Forest Inventory(NFI) has been used to estimate the forest carbon stocks based on the amount of growing stocks per hectare measured at sampled location. However, as such data are based on point(i.e., plot) measurements, it is difficult to identify spatial distribution of forest carbon stocks. This study focuses on urban areas, which have limited number of NFI samples and have shown rapid land cover change, to estimate grid-based forest carbon stocks based on UNFCCC Approach 3 and Tier 3. Land cover change and forest carbon stocks were estimated using Landsat 5 TM data acquired in 1991, 1992, 2010, and 2011, high resolution airborne images, and the 3rd, 5th~6th NFI data. Machine learning techniques(i.e., random forest and support vector machines/regression) were used for land cover change classification and forest carbon stock estimation. Forest carbon stocks were estimated using reflectance, band ratios, vegetation indices, and topographical indices. Results showed that 33.23tonC/ha of carbon was sequestrated on the unchanged forest areas between 1991 and 2010, while 36.83 tonC/ha of carbon was sequestrated on the areas changed from other land-use types to forests. A total of 7.35 tonC/ha of carbon was released on the areas changed from forests to other land-use types. This study was a good chance to understand the quantitative forest carbon stock change according to the land cover change. Moreover the result of this study can contribute to the effective forest management.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.4
• /
• pp.221-237
• /
• 2011

This study aims to investigate the environmental equity of the accessibility to urban neighborhood parks in the city of Daegu. The spatial distribution of urban neighborhood parks was explored by spatial statistics and the spatial accessibility to them was then evaluated by both minimum distance and coverage approaches. Descriptive and inferential statistics such as proximity ratio, Mann Whitney U test, and logistic regression were used for comparing the socioeconomic characteristics over different accessibilities to the neighborhood parks and then testing the distributional inequity hypothesis. The results from the minimum distance method indicated that Dalseo-gu had the best accessibility to the neighborhood parks while Dong-gu had the worst accessibility. It was apparent with the coverage method that Dalseo-gu had the best accessibility whereas Dong-gu and Nam-gu had the worst accessibility to the neighborhood parks at 500m and 1,000m buffer distances. There existed the spatial pattern of environmental inequity in old towns with respect to population density and the percentage of people under the age of 18. The spatial pattern of environmental inequity in new towns was explored on the basis of the percentage of people over the age of 65, the percentage of people below the poverty level, and the percentage of free of charge rental housing. These results were closely related to the development process of urban parks in Daegu stimulated by the quantitative urban park policy, urban development process, and residential location pattern such as permanent rental housing and free of charge rental housing. This study further extends the existing research topics of environmental justice related to the distributional inequity of environmental disamenities and hazards by focusing on environmental amenities such as urban neighborhood parks. The results from this study can be used in making the decisions for urban park management and setting up urban park policy with considering the social geography of Daegu.

• Economic and Environmental Geology
• /
• v.49 no.6
• /
• pp.417-432
• /
• 2016

It was firstly revealed in this research that the marine terrace of the Ijin-ri (Bukpyung-myeon, Haenam-gun) was formed during the last interglacial (Marine Isotope Stage 5e; MIS 5e). The marine terrace totally ranging from 4.8 m (asl) to 8.8 m (asl) is subdivided into 4 units; Unit I ranges 4.8-5.3 m, unit II ranges 5.3-6.9 m, unit III ranges 6.9-8.3 m, and unit IV ranges 8.3-8.8 m. Strong evidences that units II and III were formed during MIS5e were obtained based on OSL dating, the physical characterizations such as particle size distribution, magnetic susceptibility and water content, principal element and trace element analyses, and quantitative clay mineral analysis for samples at the 30 cm intervals. The rounded gravels on the marine terrace are regarded to be originated from the clastic materials transported directly from the surrounding mountains toward the marine and abraded in the coastal area, without any fluvial processes. During the warmest period (125k, unit II), the increase in rainfall, along with the rapid rise in sea level, was likely caused the high amount of clastic materials transported to the upper part of the beach. As a result of comparing clay mineral ratios of study site with those derived from sediments of either tidal flats, or the Yellow Sea, it is interpreted that the sediments of study site were influenced from the marine. The results will be used to investigate the hydrological activity and sedimentary environment during the high sea level in the past.

• Journal of Oral Medicine and Pain
• /
• v.30 no.3
• /
• pp.337-344
• /
• 2005

A tactile sensor employs a piezoelectric element to detect contact frequency shifts and thereby measure the stiffness or softness of material such as tissue, which allows the sensor to be used in many fields of research for urology, cardiology, gynecology, sports medicine and caner detection and especially for cosmetics and skin care. In this study, reliability of the tactile sensor system was investigated with its manual application to the muscles susceptible to temporomandibular disorders. Stiffness and elasticity of anterior temporalis, masseter and trapezius muscles were calibrated bilaterally from 5 healthy men with an average of 24.5$\pm$0.94 years. The tactile sensor used in this study had a computer-controlled and motor-driven sensor unit which automatically pressed down on the skin surface over the muscles being measured and retracted, thereby providing the hysteresis curve. The slope of the tangent of the hysteresis curve (${\Delta}f/{\Delta}x$) is defined as stiffness of the muscle being measured and the distance between the two parts of the curve as its elasticity. To determine inter-examiner reliability, all the measurements were performed by the two examiners A and B, respectively and the same examination were repeated with an interval of 2 days for intra-examiner reliability. The results from this study demonstrated high reliability in measuring stiffness and elasticity of anterior temporalis, masseter and upper trapezius muscles using a tactile sensor system. It is suggested that the tactile sensor system can be a highly reproducible and effective instrument for quantitative evaluation of the muscle in head and neck region.

• Journal of Biomedical Engineering Research
• /
• v.24 no.2
• /
• pp.133-140
• /
• 2003

In this study, muscle activity was measured using surface EMG (sEMG) during a voluntary maneuver (ankle dorsiflexion) in the supine position was compared pre and post gait training. Nine patients with incomplete spinal cord injury participated in a supported treadmill ambulation training (STAT), twenty minutes a day, five days a week for three months. Two tests, a gait speed test and a voluntary maneuver test, were made the same day, or at least the same week, pre and post gait training. Ten healthy subjects' data recorded using the same voluntary maneuvers were used for the reference. sEMG measured from ten lower limb muscles was used to observe the two features of amplitude and motor control distribution pattern, named response vector. The result showed that the average gait speed of patients increased significantly (p〈0.1) from 0.47$\pm$0.35 m/s to 0.68$\pm$0.52 m/s. In sEMG analysis, six out of nine patients showed a tendency to increase the right tibialis anterior activity during right ankle dorsiflexion from 109.7$\pm$148.5 $mutextrm{V}$ to 145.9$\pm$180.7 $mutextrm{V}$ but it was not significant (p〈0.055). In addition, only two patients showed increase of correlation coefficient and total muscle activity in the left fide during left dorsiflexion. Patients' muscle activity changes after gait training varied individually and generally depended on their muscle control abilities of the pre-STAT status. Response vector being introduced for quantitative analysis showed good Possibility to anticipate. evaluate, and/or guide patients with SCI, before and after gait training.

• Journal of Korean Academy of Nursing
• /
• v.25 no.1
• /
• pp.61-79
• /
• 1995

When children are admitted to hospital, they have to adapt to new and unfamiliar stimuli. Children may respond with fear to stimuli such as pain or unfamiliar experiences. One goal of nursing is to help hospitalized children to adapt effectively to their hospital experience. Accordingly, nurses need to assess childrens' fears of their hospital experience to contribute to the planning of care to alleviate these fears. The problem addressed by this study was to identify and measure hospital-related fears(hereafter called HRF) in hospitalized school-aged children. The study was conceptualized with Roy's model. A descriptive qualitative approach was used first, followed by a quantitative approach. This study was conducted from November 30, 1989 to January 12, 1991. The sample consisted of 395 hospitalized school-aged children selected through an allocated sampling technique in nine general hospitals. The HRF questionnaire (three point likert scale ) was developed by a delphi technique. The data were analyzed by an SAS program. Factor analysis was used for the examination of component factors. Differences in the HRF related to demographic variables were examined by t-test, analysis of variance and the Scheffe test. The crude scores of the HRF scale were transformed into T- scores to calculate the standard scores. The results included the following : 1. Forty-four items were derived from 188 statements identifying the childrens' hospital-re-lated fears. These items clustered into 14 factors, fear of injections, operations, bodily harm others' pain, medical rounds, physical examinations, medical staff, disease process, blood and X-rays, drugs and cockroaches, tests, harsh discipline from parents or staff, being absent from school, and separation from family. The 14 factors was classified into four categories,'pain','the unfamiliar','the un-known' and 'separation'. 2. The reliability of the HRF instruments was .92(Cronbach's alpha). In the factor analysis, Cronbach's alpha coefficients for the 14 factors ranged from .84 to .86 and Cronbach's alpha coefficients for the four categories ranged from .70 to .84. Pearson correlation coefficient scores for relationships among the 14 factors ranged from ,11 to .50, and among the four categories, from ,44 to ,63, indicating their relative independence. 3. The total group HRF score ranged from 45 to 130 in a possible range of H to 132, with a mean of 74.51. The fears identified by the children were, in order, injections, harsh discipline by parents or staff, bodily harm, operations, medical staff, disease process, and medical rounds ; the least feared was others' pain. The fear item with the highest mean score was surgery and the lowest was examination by a doctor. HRF scores were higher for girls than for boys, and for grade 1 students than for grade 6 students. HRF scores were lower for children whose fathers were over 40 than for those whose fathers were in the 30 to 39 age group, and whose mothers were over 35 than for those whose mothers were in the 20 to 34 age group. HRF scores were lower when the mother rather than any other person stayed with the child. The expressed fear of pain, the unfamiliar, the un-known and of separation directs nurses' concern to the threat felt by hospitalized children to their concept of self. This study contributes to the assessment of fears of hospitalized children and of stimuli impinging on those fears. Accordingly, nursing practice will be directed to the alleviation of pain, pre-admission orientation to the hospital setting and routines, initiation of information about procedures and experiences and arrangments for mothers to stay with their children. Recommendations were made for further research in different settings and for development and testing of the instrument.