• 한국측량학회지
• /
• 제36권3호
• /
• pp.135-152
• /
• 2018

The purpose of this study is to propose an optimal fusion method of aerial multi - sensor data to improve the accuracy of land cover classification. Recently, in the fields of environmental impact assessment and land monitoring, high-resolution image data has been acquired for many regions for quantitative land management using aerial multi-sensor, but most of them are used only for the purpose of the project. Hyperspectral sensor data, which is mainly used for land cover classification, has the advantage of high classification accuracy, but it is difficult to classify the accurate land cover state because only the visible and near infrared wavelengths are acquired and of low spatial resolution. Therefore, there is a need for research that can improve the accuracy of land cover classification by fusing hyperspectral sensor data with multispectral sensor and aerial laser sensor data. As a fusion method of aerial multisensor, we proposed a pixel ratio adjustment method, a band accumulation method, and a spectral graph adjustment method. Fusion parameters such as fusion rate, band accumulation, spectral graph expansion ratio were selected according to the fusion method, and the fusion data generation and degree of land cover classification accuracy were calculated by applying incremental changes to the fusion variables. Optimal fusion variables for hyperspectral data, multispectral data and aerial laser data were derived by considering the correlation between land cover classification accuracy and fusion variables.

• 정보보호학회논문지
• /
• 제27권1호
• /
• pp.129-145
• /
• 2017

본 연구는 지속적으로 발생하고 있는 개인정보 유출사고에 대한 기업의 리스크와 손해금액 산출을 위해, 최신 리스크 분석방법론인 FAIR(Factor Analysis of Information Risk)를 사용하였다. FAIR를 통해서 실제 개인정보 유출 사고 기업을 예를들어, 손해금액을 분석하고 산출하는 방법론을 제시 하였다. 전문가 집단의 설문을 실시하고 AHP(Analytic Hierarchy Process) 방법론을 사용하여 손해금액 산정요소의 중요도와 적절성을 객관적으로 평가하였다, 본 연구를 통해서 개인정보보호 실무 담당자는 스스로 손해금액을 최신 리스크 평가 방법론을 통해서 산정하고 입증할 수 있다. 또한 본 연구의 손해금액 산정요소를 해당기업에 맞게 선택하여 정확한 개인정보 유출에 따른 손해금액 등 경제적 손실을 추정할 수 있으며, 사고조치 및 예방대책의 수립과 경영진에게 보고할 수 있는 객관적인 근거를 확보 할 수 있다.

• Membrane and Water Treatment
• /
• 제9권6호
• /
• pp.463-471
• /
• 2018

The present paper deals with the liquid-liquid extraction and flat sheet supported liquid membrane studies of Pd(II) separation from nitric acid medium using a novel synthesized ligand, namely, N,N,N',N'-tetraethyl-2,2-thiodiethanthiodiglycolamide (TETEDGA). The effect of various diluents and stripping reagents on the extraction of Pd(II) was studied. The liquid-liquid extraction studies showed complete extraction of Pd(II) in ~ 5 min. The influence of nitric acid and TETEDGA concentration on the distribution of Pd(II) has been investigated. The increase in nitric acid concentration resulted in increase in extraction of Pd(II). Stoichiometry of the extracted species was found to be $Pd(NO_3)_2{\cdot}TETEDGA$ by slope analysis method. Extraction studies with SSCD solution showed negligible uptake of Pt, Cr, Ni, and Fe, thus showing very high selectivity and extractability of TETEDGA for Pd(II). The flat sheet supported liquid membrane studies showed quantitative transport of Pd(II), ~99%, from the feed ($3M\;HNO_3$) to the strippant (0.02 M thiourea diluted in $0.4M\;HNO_3$) using 0.01 M TETEDGA as a carrier diluted in n-dodecane. Extraction time was ~160 min. Parameters such as feed acidity, TETEDGA concentration in membrane phase, membrane porosity etc. were optimized to achieve maximum transport rate. Permeability coefficient value of $2.66{\times}10^{-3}cm/s$ was observed using TETEDGA (0.01 M) as carrier, at 3 M, $HNO_3$ feed acidity across $0.2{\mu}m$ PTFE as membrane. The membrane was found to be stable over five runs of the operation.

• 한국추진공학회지
• /
• 제8권3호
• /
• pp.37-43
• /
• 2004

증기발생기 슬러지 세정을 위한 고압분사 실험의 분류궤적에 대한 가시화 및 속도분포를 측정함으로써 최적의 노즐형상을 찾기 위하여 플랜져방식의 고압펌프(사용압력 : 200 kg/$\textrm{cm}^2$, 15HP, 11kW. 토출유량 Q : 301/min)를 이용하였다. 가시화를 통하여 정성적인 분포를 비교분석할 수 있었고, 분류의 속도분포등을 통하여 노즐 형상비에 따른 유동의 차이를 2차원 PDPA 광학 계측장비를 사용하여 분석하였다. 고압 분사시 형상비에 관계없이 모든 경우에 있어서 중심축을 따라 모든 궤적들은 거의 유사함을 보였으나, 분류 중심에서 벗어난 외곽영역에서는 많은 차이가 있음을 알 수 있었다 이는 형상 비에 따른 주변 공기와의 마찰 및 분류 유입현상 때문이라 여겨진다.

• Bulletin of the Korean Chemical Society
• /
• 제27권5호
• /
• pp.718-724
• /
• 2006

The heterogeneous association behaviour of various concentration binary mixtures of mono alkyl ethers of ethylene glycol with ethyl alcohol were investigated by dielectric measurement in benzene solutions over the entire concentration range at 25 ${^{\circ}C}$. The values of static dielectric constant $\epsilon_0$ of the mixtures were measured at 1 MHz using a four terminal dielectric liquid test fixture and precision LCR meter. The high frequency limiting dielectric constant $\epsilon_\infty$ values were determined by measurement of refractive index $n_D$ ($\epsilon_\infty\;=\;n_D\;^2$). The measured values of $\epsilon_0$ and $\epsilon_\infty$ were used to evaluate the values of excess dielectric constant $\epsilon^E$, effective Kirkwood correlation factor $g^{eff}$ and corrective correlation factor $g_f$ of the binary polar mixtures to obtain qualitative and quantitative information about the H-bond complex formation. The non-linear behaviour of the observed $\epsilon_0$ values of the polar molecules and their mixtures in benzene solvent confirms the variation in the associated structures with change in polar mixture constituents concentration and also by dilution in non-polar solvents. Appearance of the maximum in $\epsilon^E$ values at different concentration of the polar mixtures suggest the formation of stable adduct complex, which depends on the molecular size of the mono alkyl ethers of ethylene glycol. Further, the observed $\epsilon^E$ < 0 also confirms the heterogeneous H-bond complex formation reduces the effective number of dipoles in these polar binary mixtures. In benzene solutions these polar molecules shows the maximum reduce in effective number of dipoles at 50 percent dilutions. But ethyl alcohol rich binary polar mixtures in benzene solvent show the maximum reduce in effective number of dipoles in benzene rich solutions.

• Reproductive and Developmental Biology
• /
• 제31권1호
• /
• pp.15-20
• /
• 2007

가축의 번식과 수요를 조절할 수 있는 생물학적 자극 통제 수단으로 새로운 돼지 페르몬성 냄새 물질를 탐색하고자, 기질 분자로서 2-cyclohexyloxytetrahydrofurane (A), 2-phenoxytetrahydrofurane (B) 유도체들의 설명인자인 물리화학 파라미터와 돼지 페로몬의 수용체 (pOBP)에 대한 결합 친화력 상수($p[Od.]_{50}$) 간의 2D-QSAR 모델을 유도하고 검토하였다. 2D-QSAR 모델은 결합 친화력 상수를 약 96.4% 설명하는 매우 양호한 모델($r^{2}=0.964$)로서 분자내 치환기의 소수성 (SL) 상수에 관한 적정값이 $(SL)_{opt.}=1.418$일 때 가장 높은 결합 친화력을 나타냄을 알았다. 그러므로 분자내 치환기의 소수성 인자가 결합 친화력 상수에 가장 큰 영향을 미치는 중요한 요소이었다.

• Applied Biological Chemistry
• /
• 제36권5호
• /
• pp.381-386
• /
• 1993

새로운 25종의 Imazethapyr 유도체, (2-(4-isopropyl-4-methyl-5-oxo-2-imidazolin-2-yl)-3-(N-methyl-N-(X)치환-phenylaminooxoacetyl)-5-methylpyridine)들을 합성하여 치환기(X) 변화에 따른 발아 전 후, 피(Echinochla crus-galli.)의 제초활성에 미치는 3-(N-mothy-N-(X)치환-phenylaminoozoacetyl) group의 영향을 검토한 바, 발아 전보다 발아 후의 제초활성에 더 큰 영향을 미침을 알 수 있었다. 발아 후의 제초활성은 X-치환기의 전자밀게 효과와 입체상수 $(E_s)$에 의존적이었으며 가장 큰 제초활성을 나타내는 화합물로는 $bulky(E_s<0)$하고 전자밀게$(\sigma<0)$가 치환된 화합물, 15(4-t-butyl group)와 20(3,5-dimethyl group)이었다. 그리고 높은 제초활성을 나타낼 것으로 예상되는 화합물의 조건들이 검토되었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권1호
• /
• pp.49-56
• /
• 2010

Objective: To evaluate nasal and upper lip changes after Le Fort I surgery by means of images taken with a three-dimensional computed tomography (3D-CT). Methods: Fifteen patients (9 female and 6 male, mean age 21.9 years) with preoperative and postoperative 3D-CT were studied. The patients underwent maxillary movement with impaction or elongation, and advancement or setback. With the 3D-CT which presents reconstructive soft tissue images, preoperative and postoperative measurement and analysis were performed for nasal tip projection angle, columellar angle, supratip break angle, nasolabial angle, interalar width, internostril width, columella length and nasal tip projection. Results: Postoperative interalar and internostril widening was significant for all categories of maxillary movement. However, there was little significant relation in all parameters between the amount and direction of maxillary movement. Interestingly, movement of the maxilla with upward did show a little decrease in the columellar angle, supra tip break angle and nasolabial angle. Also movement of the maxilla with forward did show a little advancement in the upper lip position. Conclusion: Changes to the nose clearly occur after orthognathic surgery. There was a significant increase in postoperative interalar width and internostril width with maxillary movement. However, no clear correlation could be determined between amount of change and maxillary movement. Interestingly, maxillary impaction did show a little decrease in the columellar angle, supra tip break angle and nasolabial angle. In addition, we used 3D-CT for more precise analysis as a useful tool.

• 대한치과교정학회지
• /
• 제48권4호
• /
• pp.268-280
• /
• 2018

Resistance to sliding (RS) between the bracket, wire, and ligature has been largely debated in orthodontics. Despite the extensive number of published studies, the lack of discussion of the methods used has led to little understanding of this phenomenon. The aim of this study was to discuss variables affecting RS in orthodontics and to suggest an operative protocol. The search included $PubMed^{(c)}$, $Medline^{(c)}$, and the Cochrane $Library^{(c)}$. References of full-text articles were manually analyzed. English-language articles published between January 2007 and January 2017 that performed an in vitro analysis of RS between the bracket, wire, and ligature were included. Study methods were analyzed based on the study design, description of materials, and experimental setup, and a protocol to standardize the testing methods was proposed. From 404 articles identified from the database search and 242 records selected from published references, 101 were eligible for the qualitative analysis, and six for the quantitative synthesis. One or more experimental parameters were incompatible and a meta-analysis was not performed. Major factors regarding the study design, materials, and experimental setup were not clearly described by most studies. The normal force, that is the force perpendicular to the sliding of the wire and one of the most relevant variable in RS, was not considered by most studies. Different variables were introduced, often acting as confounding factors. A protocol was suggested to standardize testing procedures and enhance the understanding of in vitro findings.

• Journal of Dental Anesthesia and Pain Medicine
• /
• 제20권2호
• /
• pp.73-81
• /
• 2020

Background: The international organization for standardization (ISO) 80601-2-61 dictates that the accuracy of a pulse oximeter should be assessed by a controlled desaturation study. We aimed to characterize the relationship between the fraction of inspired oxygen (FiO₂) and peripheral oxygen saturation (SpO₂) using a turnover model by retrospectively analyzing the data obtained from previous controlled desaturation studies. Materials and Methods: Each volunteer was placed in a semi-Fowler's position and connected to a breathing circuit to administer the hypoxic gas mixture containing medical air, oxygen, nitrogen, and carbon dioxide. Volunteers were exposed to various levels of induced hypoxia over 70-100% arterial oxygen saturation (SaO₂). The study period consisted of two rounds of hypoxia and the volunteers were maintained in room air between each round. FiO₂ and SpO₂ were recorded continuously during the study period. A population pharmacodynamic analysis was performed with the NONMEM VII level 4 (ICON Development Solutions, Ellicott City, MD, USA). Results: In total, 2899 SpO₂ data points obtained from 20 volunteers were used to determine the pharmacodynamic characteristics. The pharmacodynamic parameters were as follows: k_out = 0.942 1/min, Imax = 0.802, IC₅₀ = 85.3%, γ = 27.3. Conclusion: The changes in SpO₂ due to decreases in FiO₂ well explained by the turnover model with inhibitory function as a sigmoidal model.