• 한국물환경학회지
• /
• 제33권3호
• /
• pp.348-358
• /
• 2017

The process of evaluating and selecting the best available techniques presents various characteristics for each country. In the case of EU, BAT is selected through TWG meeting after first screening, mass and energy balance, impact assessment and decision support process. Korea has proposed four principles to select BAT that can be carbon neutral for each environmental infrastructure in order to reduce greenhouse gas emissions. In order to evaluate and select the best available technique, it is necessary to differentiate the method according to whether it is a technique generally applied at the current workplace, whether it is a single technique or a combination technique, and whether it is a technology technique or management technique. In the case of a single technique, it should be evaluated whether it is a technique applied in the workplace, excessive cost, superior environmental technique over BAT, and secondary environmental pollution. In the case of multiple techniques, it is necessary to examine whether the emission standards are met and whether the pollutants can be treated at the same level as BAT. In the case of BAT candidates for management techniques, whether or not they contribute directly or indirectly to lowering the emission level of pollutants can be an important evaluation item. In the case of environmental techniques that are not generally applied in the workplace, it is recommended that the following 8 steps be carried out, including those prescribed by law. In the first stage, the list of performance evaluation factors is listed. In the second stage, the level of disposal of pollutants and the level of satisfaction with standards are listed. In the third stage, the environmental evaluation elements are listed. In the fourth stage, Is to list the economic evaluation elements, step 6 is to list the pollution and accident prevention evaluation factors, step 7 is the quantitative evaluation of the technical working group, and step 8 is BAT confirmation through deliberation of the central environmental policy committee.

• 한국산업보건학회지
• /
• 제27권4호
• /
• pp.324-332
• /
• 2017

Objectives: Much scientific evidence indicate a positive association between moldy environments and respiratory illnesses and/or symptoms. However, few comprehensive assessments of mold have been performed for such settings. Spore counts or microscopic enumeration only may not be sufficient for evaluating fungal exposure. Recently, Mold Specific QPCR technology developed by the US EPA (Environmental Relative Moldiness Index, ERMI) has been widely used worldwide and great performance for assessing fungal exposure has been shown. Methods: We aimed to develop a Korean version of ERMI suitable for the distribution of fungal flora in Korea. Thirty dwellings in the Seoul and Incheon area were selected for sampling, and each was classified as 'Flooded, 'Water-damaged' or 'Non-water-damaged'. Results: Dust on the floor and airborne sampling were collected using an MAS100 and a 'Dustream' collector. Samples were analyzed by quantitative polymerase chain reaction(QPCR) for the 36 molds belonging to ERMI. Student t-test and ANOVA tests were carried out using SAS software. The median ERMI values of flooded, water damaged, and non-water damaged dwellings were 8.24(range: -5.6 to 27.9), 5.47(-25. 4 to 32.7), and -15.30(-24.6 to 14.8), respectively. Significant differences were observed between flooded and non-water damaged dwellings (P=0.001) and between water-damaged and non-water damaged dwellings (P=0.032). Conclusion: Our findings indicate that ERMI values attributed to dust samples in Korea could be applicable for the identification of flooded or water damaged buildings. However, much data is needed for continuously developing the Korean version of ERMI values.

• Asian Pacific Journal of Cancer Prevention
• /
• 제17권12호
• /
• pp.5229-5235
• /
• 2016

Prostate cancer (PCa) remains one of the most widespread and perplexing of all human malignancies. Assessment of gene expression is thought to have an important impact on cancer diagnosis, prognosis and therapeutic decisions. In this context, we explored combined expression of PCa related target genes AMACR and PCA3 in 126 formalin fixed paraffin embedded prostate tissues (FFPE) from Moroccan patients, using quantitative real time reverse transcription-PCR (RT-qPCR). This quantification required data normalization accomplished using stably expressed reference genes (RGs). A panel of twelve RG was assessed, data being analyzed using GenEx V6 based on geNorm, NormFinder and statistical methods. Accordingly, the hnRNP A1 gene was identified and selected as the most stably expressed RG for reliable and accurate gene expression quantification in prostate tissues. The ratios of both PCA3 and AMACR gene expression relative to that of the hnRNP A1 gene were calculated and the performance of each target gene for PCa diagnosis was evaluated using receiver-operating characteristics. PCA3 and AMACR mRNA quantification based on RT-qPCR may prove useful in PCa diagnosis. Of particular interesting, combining PCA3 and AMACR quantification improved PCa prediction by increasing sensitivity with retention of good specificity.

• 대한안전경영과학회지
• /
• 제21권2호
• /
• pp.25-42
• /
• 2019

The government announced that it would ask the contractors not only the supplier but also the contractors to take the same responsibilities if they did not observe industrial accident safety measures from 2019. The semiconductor manufacturing process belongs to the representative disaster industry group in which the facility is directly located inside a closed space called clean room. According to previous studies, the semiconductor industry group used checklists for safety management of their suppliers. This study has developed a model for assessing suppliers by constructing a quantitative checklist item through the risk assessment methodology, laws and regulations. The evaluation model of the supplier set up through this study becomes the safety management standard in the semiconductor industry. Furthermore, it is applied to the partner companies in the operation of ISO 14001, 45001, I would like to apply it as a measure of performance management for CSR (Corporate Social Responsibility).

• 한국측량학회지
• /
• 제38권6호
• /
• pp.707-716
• /
• 2020

원격탐사 분야에서 물체의 특성을 정략적으로 추정할 수 있는 분광센서에 대한 관심이 늘어나고 있으며, 특히, 최근 드론에 탑재하여 운영할 수 있는 경량 다분광 카메라의 활용이 주목받고 있다. 정량적 원격탐사를 위해서는 카메라 또는 센서에서 획득된 복사량의 정확도가 중요하지만, 저가의 다분광 카메라의 경우 복사정확도에 대한 독립적인 검증이 충분히 수행되지 않았다. 본 연구에서는 최근 농작물 모니터링, 식생 분석, 수질 분석 등에 다양하게 활용되고 있는 MicaSense사의 RedEdge-MX 카메라에 대한 복사 정확도 분석을 수행하였다. 미국 NIST 표준에 따라 교정된 초분광 센서인 TriOS RAMSES를 이용하여, RedEdge-MX 센서의 복사휘도 및 복사조도에 대한 상대 보정계수를 산출하였다. 분석결과, RedEdge-MX의 복사휘도는 밴드별로 RAMSES보다 5~16% 가량 낮게 나타났고, 복사조도 역시 1~20% 가량 낮은 것이 확인되었다. 본 연구에서는 RedEdge-MX의 관측값을 RAMSES에 상응하는 값으로 변환시키기 위한 보정계수를 1차 그리고 3차 회귀분석을 통하여 제공한다.

• 분석과학
• /
• 제37권2호
• /
• pp.98-113
• /
• 2024

The current investigation entails the characterization of five degradation products (DPs) formed under different stress conditions of loteprednol using liquid chromatography-tandem mass spectrometry (LC-MS/MS). In addition, this study developed a stable high-performance liquid chromatography (HPLC) method for evaluating loteprednol along with impurities. The method conditions were meticulously fine-tuned which involved the exploration of the appropriate solvent, pH, flow of the mobile phase, columns, and wavelength. The method conditions were carefully chosen to successfully resolve the impurities of loteprednol and were employed in subsequent validation procedures. The stability profile of loteprednol was exposed to stress degradation experiments conducted under five conditions, and DPs were structurally characterized by employing LC-MS/MS. The chromatographic resolution of loteprednol and its impurities along with DPs was effectively achieved using a Phenomenex Luna 250 mm C18 column using 0.1 % phosphoric acid, methanol, and acetonitrile in 45:25:30 (v/v) pumped isocratically at 0.8 mL/min with 243 nm wavelength. The method produces an accurate fit calibration curve in 50-300 ㎍/mL for loteprednol and LOQ (0.05 ㎍/mL) - 0.30 ㎍/mL for its impurities with acceptable precision, accuracy, and recovery. The stress-induced degradation study revealed the degradation of loteprednol under basic, acidic, and photolytic conditions, resulting in the formation of seven distinct DPs. The efficacy of this method was validated through LC-MS/MS, which allowed for the verification of the chemical structures of the newly generated DPs of loteprednol. This method was appropriate for assessing the impurities of loteprednol and can also be appropriate for structural and quantitative assessment of its degradation products.

• 대한의용생체공학회:의공학회지
• /
• 제43권1호
• /
• pp.52-60
• /
• 2022

Purpose: For now, cognitive load is assessed based on survey-based methods, which can be difficult to track the amount of cognitive load in real-time. In this study, we investigated the difference in electrophysiological activation due to different levels of cognitive load not only at sensor-level but also at source-level using electroencephalogram that might be potentially used for quantitative cognitive load evaluation. Materials and Methods: In this study, ten healthy subjects (mean age 24.3 ± 2.1, three female) participated the experiment. All participants performed 4 sessions of n-back task in different difficulties: 0-, 1-, 2-, and 3-back during electroencephalogram recording. For sensor-level analysis, we calculated the event-related potential and event-related spectral perturbation while low resolution brain electromagnetic tomography (LORETA) to estimate the source activation. Each result was compared between different workload conditions using statistical analysis. Results: Statistical results revealed that the accuracy of the task performance was significantly different between different cognitive loads (p = 0.018). The post-hoc analysis confirmed that the accuracy of the 3-back task was significantly decreased compared to 1-back condition (p = 0.018), but not with 2-back condition (p = 0.180). ERP results showed that P300 target amplitude between 1-back and 3-back had a marginal difference in Cz (p = 0.059) and Pz(p = 0.093). A significant inhibition in Cz high-beta activation (p = 0.017) and decrease in source activation of right parahippocampal gyrus was found in 3-back condition compared to 1-back condition (p < 0.05). Conclusion: In this study, we compared the sensor- and source-level differences in electroencephalogram between different levels of cognitive load, that were found to be in line with the previous reports related to cognitive load evaluation. We expect that the outcome of the current study can be used as a feature to establish a quantitative cognitive load assessment system.

• Korean Journal of Radiology
• /
• 제24권2호
• /
• pp.133-144
• /
• 2023

Objective: Cyclin-dependent kinase inhibitor (CDKN)2A/B homozygous deletion is a key molecular marker of isocitrate dehydrogenase (IDH)-mutant astrocytomas in the 2021 World Health Organization. We aimed to investigate whether qualitative and quantitative MRI parameters can predict CDKN2A/B homozygous deletion status in IDH-mutant astrocytomas. Materials and Methods: Preoperative MRI data of 88 patients (mean age ± standard deviation, 42.0 ± 11.9 years; 40 females and 48 males) with IDH-mutant astrocytomas (76 without and 12 with CDKN2A/B homozygous deletion) from two institutions were included. A qualitative imaging assessment was performed. Mean apparent diffusion coefficient (ADC), 5th percentile of ADC, mean normalized cerebral blood volume (nCBV), and 95th percentile of nCBV were assessed via automatic tumor segmentation. Logistic regression was performed to determine the factors associated with CDKN2A/B homozygous deletion in all 88 patients and a subgroup of 47 patients with histological grades 3 and 4. The discrimination performance of the logistic regression models was evaluated using the area under the receiver operating characteristic curve (AUC). Results: In multivariable analysis of all patients, infiltrative pattern (odds ratio [OR] = 4.25, p = 0.034), maximal diameter (OR = 1.07, p = 0.013), and 95th percentile of nCBV (OR = 1.34, p = 0.049) were independent predictors of CDKN2A/B homozygous deletion. The AUC, accuracy, sensitivity, and specificity of the corresponding model were 0.83 (95% confidence interval [CI], 0.72-0.91), 90.4%, 83.3%, and 75.0%, respectively. On multivariable analysis of the subgroup with histological grades 3 and 4, infiltrative pattern (OR = 10.39, p = 0.012) and 95th percentile of nCBV (OR = 1.24, p = 0.047) were independent predictors of CDKN2A/B homozygous deletion, with an AUC accuracy, sensitivity, and specificity of the corresponding model of 0.76 (95% CI, 0.60-0.88), 87.8%, 80.0%, and 58.1%, respectively. Conclusion: The presence of an infiltrative pattern, larger maximal diameter, and higher 95th percentile of the nCBV may be useful MRI biomarkers for CDKN2A/B homozygous deletion in IDH-mutant astrocytomas.

• 콘크리트학회논문집
• /
• 제22권4호
• /
• pp.535-546
• /
• 2010

최근 교량구조물의 증가와 더불어 차량 및 선박과 시설물 간의 충돌사고가 발생할 확률이 높아지고 있다. 특히 교량을 구성하는 상부구조와 하부구조 중에서 충돌에 의한 영향은 주로 교각 등의 하부구조가 받을 가능성이 크다. 교각에 차량 혹은 선박이 충돌하게 되면 교량 하부구조에 국부적인 손상을 유발하게 되며, 충돌사고는 훨씬 더 순간적이고 강한 물리적인 질량의 충돌을 동반할 수 있으며, 극단적인 경우 상부구조의 붕괴까지 유발할 수 있다. 그러므로 이 연구에서는 콘크리트 구조물인 교량의 교각과 같은 압축부재에 대한 설계 시 차량 등에 의한 충돌을 고려하고, 차량 충돌하중에 의한 손상지수를 정량적으로 평가하기 위해서 기존의 설계방법을 개선하고 새로운 구조물의 저항성능 평가방법을 정립하기 위하여 동적유한요소해석 프로그램인 LS-DYNA를 이용하여 교각단면, 차량의 충돌각에 따른 충격도, 축력 및 축력비, 콘크리트 강도, 주철근비와 횡방향 철근, 세장비 등을 변화시켜 케이스별 해석을 수행하였다. 이 연구 결과를 통해 콘크리트 구조물의 거동해석 및 설계기법을 Bayesian 통계방법을 이용한 만족도 곡선을 통해 충격하중을 받을 시의 성능 기반형 저항성능 평가방법을 개발하였으며, 이는 실제 충격하중에 의한 구조물의 방호성능 및 설계 시에 적절하게 적용할 수 있을 것으로 판단된다.

• Journal of Ginseng Research
• /
• 제43권4호
• /
• pp.508-516
• /
• 2019

Background: Ginsenosides are not only the principal bioactive components but also the important indexes to the quality assessment of Panax ginseng Meyer. Their contents in cultivated ginseng vary with the growth environment and age. The present study aimed at evaluating the significant difference between 36 cultivated ginseng of different cultivation areas and ages based on the simultaneously determined contents of 14 ginsenosides. Methods: A high-performance liquid chromatography (HPLC) coupled with triple quadrupole mass spectrometer (MS) method was developed and used in the multiple reaction-monitoring (MRM) mode (HPLC-MRM/MS) for the quantitative analysis of ginsenosides. Multivariate statistical analysis, such as principal component analysis and partial least squares-discriminant analysis, was applied to discriminate ginseng samples of various cultivation areas and ages and to discover the differentially accumulated ginsenoside markers. Results: The developed HPLC-MRM/MS method was validated to be precise, accurate, stable, sensitive, and repeatable for the simultaneous determination of 14 ginsenosides. It was found that the 3- and 5-yr-old ginseng samples were differentiated distinctly by all means of multivariate statistical analysis, whereas the 4-yr-old samples exhibited similarity to either 3- or 5-yr-old samples in the contents of ginsenosides. Among the 14 detected ginsenosides, Rg1, Rb1, Rb2, Rc, 20(S)-Rf, 20(S)-Rh1, and Rb3 were identified as potential markers for the differentiation of cultivation ages. In addition, the 5-yr-old samples were able to be classified in cultivation area based on the contents of ginsenosides, whereas the 3- and 4-yr-old samples showed little differences in cultivation area. Conclusion: This study demonstrated that the HPLC-MRM/MS method combined with multivariate statistical analysis provides deep insight into the accumulation characteristics of ginsenosides and could be used to differentiate ginseng that are cultivated in different areas and ages.