• Natural Product Sciences
• /
• v.25 no.3
• /
• pp.222-227
• /
• 2019

Quantitative nuclear magnetic resonance (qNMR) is a well-established method adopted by international pharmacopoeia for quantitative and purity analyses. Emodin is a type of anthraquinone, well known as the main active component of Fabaceae, Polygonaceae and Rhamnaceae. Purity analysis of emodin is usually performed by using the high-performance liquid chromatography (HPLC)-UV method. However, it cannot detect impurities such as salts, volatile matter, and trace elements. Using the qNMR method, it is possible to determine the compound content as well as the nature of the impurities. Several experimental parameters were optimized for the quantification, such as relaxation delay, spectral width, number of scans, temperature, pulse width, and acquisition time. The method was validated, and the results of the qNMR method were compared with those obtained by the HPLC and mass balance analysis methods. The qNMR method is specific, rapid, simple, and therefore, a valuable and reliable method for the purity analysis of emodin.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.1
• /
• pp.27-34
• /
• 2013

Quantitative analysis of 5-hydroxymethylfufural (5-HMF) conversion from fructose by dehydration and rearrangement was investigated by $^1H$-NMR spectroscopic method. Fructose was converted to 5-HMF in dimethylsulfoxide (DMSO)-$d^6$ or acidic deuterium hydroxide at controlled reaction temperature and time. With addition of internal standards (biphenyl for DMSO-$d^6$ solvent, and 2,5-dihydroxybenzoic acid for deuterium oxide solvent), conversion from fructose to 5-HMF was analyzed by $^1H$-NMR spectroscopy. Quantitative analysis was run by comparison with peak area integration between of 5-HMF and internal standard. In DMSO solvent, 5-HMF was stable end product but part of 5-HMF was converted to formic and levulinic acid at acidic aqueous medium.

• Journal of the Korean Magnetic Resonance Society
• /
• v.10 no.1
• /
• pp.38-45
• /
• 2006

The NMR and MS techniques were applied to identification and quantitative analysis of oligomers in a commercialized poly (trimethylene terephthalate). Oligomers in a commercialized poly (trimethylene terephthalate) were extracted via a dissolving and reprecipitation method. Analysis of the components of the extract using NMR and MS revealed that it contained mainly cyclic oligomers with degrees of polymerization of 2, 4 and 5 (dimer, tetramer and pentamer). Trimer and cyclic oligomers with degrees of polymerization of more than 6 were not found in the extract in the present study. Quantitative analysis of dimer was performed by NMR spectroscopy.

• Journal of the Korean Magnetic Resonance Society
• /
• v.6 no.2
• /
• pp.94-102
• /
• 2002

An interesting recent application of intermolecular NOE experiment is the saturation transfer difference NMR(STD-NMR) method that is useful in screening compound libraries to identify bio-active ligands. This technique also identifies the group epitopes of the bound ligand in a reversibly forming protein-ligand complex. We present here a complete relaxation and conformational exchange matrix (CORCEMA) theory (Moseley et al., J. Magn. Reson. B, 108, 243-261 (1995)) applicable for the STD-NMR experiment. Using some ideal model systems we have analyzed the factors that influence the STD intensity changes in the ligand proton NMR spectrum when the resonances from some protons on the receptor protein are saturated. These factors will be discussed and some examples of its application in some model systems will be presented. This CORCEMA theory for STD-NMR and the associated algorithm are useful in a quantitative interpretation of the STD-NMR effects, and are likely to be useful in structure-based drug design efforts. They are also useful in a quantitative characterization of protein-protein (or protein-nucleic acid) contact surfaces from an intermolecular cross-saturation NMR experiment.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.615-617
• /
• 2005

[ $^{13}C$ ] NMR spectra were obtained for pure $CH_4$ hydrate in order to identify hydrate structure and cage occupancy of guest molecule. The NMR technique can provide both qualitative and quantitative hydrate characteristics. The moles of methane captured into pure $CH_4$ hydrate per mole of water were found to be similar to the full occupancy value. The overall results drawn from this study can be usefully applied to storage and transportation of natural gas.

• Analytical Science and Technology
• /
• v.18 no.2
• /
• pp.168-172
• /
• 2005

A comparison study of XRF and $^{31}P$-NMR method for the analysis of phosphorous in lubricating oil has been described. Pure oil and water were used for the observation of matrices effect variation by different analytical methods. Quantitative analysis was carried out by XRF and $^{31}P$-NMR using real samples. Significant difference is observed from the slopes on the calibration curves by the XRF due to the matrices (water: 124.0, oil: 276.6). While the result obtained from XRF showed a large matrix effect, the slopes obtained from $^{31}P$-NMR results of two different matrices, however, are in good agreement ranged of ${\pm}9%$ (water: 4.9, oil: 5.3).

• Analytical Science and Technology
• /
• v.20 no.5
• /
• pp.400-405
• /
• 2007

The comparative analysis of glycerin in cosmetic samples was carried out by LC/MS and $^1H$ NMR spectrometry. For the LC/MS analysis, aqueous solution was controlled in strong basic condition with sodium hydroxide, and benzoyl chloride was added to the solution for the derivatization of glycerin. The derivative was extracted using pentane and analyzed by the LC/MS. For the $^1H$ NMR analysis, sample was directly dissolved in $D_2O$ solvent without pretreatment. The quantitative analysis of glycerin was done by $^1H$ NMR ERETIC method. The analysis results of LC/MS and $^1H$ NMR showed that the calibration curves were a good linearity with $r^2=0.9991$ in the range of 0.1 to $10{\mu}g/mL$ and $r^2=1$ in the range of 25 to $500{\mu}g/mL$, respectively.

• Analytical Science and Technology
• /
• v.21 no.5
• /
• pp.438-441
• /
• 2008

We have developed an alternative to the internal chemical reference based on a calibrated reference signal which is not a real NMR line but an electronically produced signal (HERETIC) and determined the phosphorus concentration using this method. The area ratio of HERETIC and sample peaks obtained from the standard samples was used to measure the concentrations of different samples directly. The analysis of phosphorus by this method showed the excellent linear regression coefficient ($R^2=0.9999$) for the concentration range from 20 ppm to 500 ppm with HERETIC peak as reference.

• The Korean Journal of Ceramics
• /
• v.6 no.2
• /
• pp.155-158
• /
• 2000

NMR study has been used for measuring precise quantity of the amorphous phase in the $Si_3N_4$powder. Care must be taken to allow the $^{29}$Si nuclear spin system to fully relax between pulses in order to make the signals proportional to the number of nuclei in each phase. $^{29}$Si MAS spectrum was decomposed into the three spectra of $\alpha$-, $\beta$-, and amorphous $Si_3N_4$assuming pseudo-Voigt function. Moreover, the Rietveld analysis of the powder X-ray diffraction data was performed to measure quantity of crystalline phases as $\alpha/\beta$ ratio.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3114-3114
• /
• 2001

During the last years phytochemistry and phytopharmaceutical applications have developed rapidly and so there exists a high demand for faster and more efficient analysis techniques. Therefore we have established a near infrared transflectance spectroscopy (NIRS) method that allows a qualitative and quantitative determination of new polyphenolic pharmacological active leading compounds within a few seconds. As the NIR spectrometer has to be calibrated the compound of interest has at first to be characterized by using one or other a combination of chromatographic or electrophoretic separation techniques such as thin layer chromatography (TLC), high performance liquid chromatography (HPLC), capillary electrophoresis (CE), gas chromatography (GC) and capillary electrochromatography (CEC). Both structural elucidation and quantitative analysis of the phenolic compound is possible by direct coupling of the mentioned separation methods with a mass spectrometer (GC-MS, LC-MS/MS, CE-MS, CEC-MS) and a NMR spectrometer (LC-NMR). Furthermore the compound has to be isolated (NPLC, MPLC, prep. TLC, prep. HPLC) and its structure elucidated by spectroscopic techniques (UV, IR, HR-MS, NMR) and chemical synthesis. After that HPLC can be used to provide the reference data for the calibration step of the near infrared spectrometer. The NIRS calibration step is time consuming, which is compensated by short analysis times. After validation of the established NIRS method it is possible to determine the polyphenolic compound within seconds which allows to raise the efficiency in quality control and to reduce costs especially in the phytopharmaceutical industry.