• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.12
• /
• pp.4531-4544
• /
• 2021

Because the traditional network information security vulnerability risk assessment method does not set the weight, it is easy for security personnel to fail to evaluate the value of information security vulnerability risk according to the calculation value of network centrality, resulting in poor evaluation effect. Therefore, based on the network security data element feature system, this study designed a quantitative assessment method of network information security vulnerability detection risk under single transmission state. In the case of single transmission state, the multi-dimensional analysis of network information security vulnerability is carried out by using the analysis model. On this basis, the weight is set, and the intrinsic attribute value of information security vulnerability is quantified by using the qualitative method. In order to comprehensively evaluate information security vulnerability, the efficacy coefficient method is used to transform information security vulnerability associated risk, and the information security vulnerability risk value is obtained, so as to realize the quantitative evaluation of network information security vulnerability detection under single transmission state. The calculated values of network centrality of the traditional method and the proposed method are tested respectively, and the evaluation of the two methods is evaluated according to the calculated results. The experimental results show that the proposed method can be used to calculate the network centrality value in the complex information security vulnerability space network, and the output evaluation result has a high signal-to-noise ratio, and the evaluation effect is obviously better than the traditional method.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.34 no.1
• /
• pp.189-207
• /
• 2023

This study focused on the public library evaluation indicators in 2022 to examine the changes and improvement recommendations. In addition, this study analyzed the results of changes in the proportion between the qualitative and quantitative evaluation. Eventually, there was a comparison between the current and previous evaluation outcomes. Furthermore, we examined the effectiveness of the current evaluation groupings of libraries. Then, we tried to discover new quantitative evaluation variables that affected the evaluation score calculation. Finally, we proposed a method for estimating variables through standardization and individualization, as well as a scheme to encourage the voluntary participation of public libraries in the evaluation.

• Journal of Environmental Impact Assessment
• /
• v.8 no.1
• /
• pp.71-79
• /
• 1999

The comparative evaluation is the most effective method for site selection because the selection of waste treatment facility is to determine the optimum site out of limited candidate sites. This study adopted the ordinal scale evaluation, one of methods of comparative evaluation. The ordinal scale evaluation aims to determine the investigating items referring to the character of sites, to determine the importance factors for investigating items, and to determine the optimum site according to the quantitative evaluation. As a result of this study, the defects of the former reports on the environmental characteristics, such as obscurity of meaning and subjective statement, were reduced by the ordinal scale evaluation which is one of the quantitative evaluation methods. This ordinal scale evaluation method has some valuable advantages, such as, to be able to consider the cost-effect efficiency, to consider the objectiveness and the clearness of the reports on the environmental characteristics. Therefore the reducement of social complications about site selection of the indisposed facilities could be expected by this study.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.23 no.6
• /
• pp.329-339
• /
• 2019

The strategy for the management of earthquakes is shifting from post recovery to prevention; therefore, seismic performance management requires quantitative predictions of damage and the establishment of strategies for initial responses to earthquakes. Currently, seismic performance evaluation for seismic management in Korea consists of two stages: preliminary evaluation and detailed evaluation. Also, the priority of seismic performance management is determined in accordance with the preliminary evaluation. As a deterministic method, preliminary evaluation quantifies the physical condition and socio-economic importance of a facility by various predetermined indices, and the priority is decided by the relative value of the indices; however, with the deterministic method it is difficult to consider any uncertainty related to the return-year, epicenter, and propagation of seismic energy. Also this method cannot support tasks such as quantitative socio-economic damage and the provision of data for initial responses to earthquakes. Moreover, indirect damage is often greater than direct damage; therefore, a method to quantify damage is needed to enhance accuracy. In this paper, a Seismic Risk Assessment is used to quantify the cost of damage of road facilities in Pohang city and to support decision making.

• Journal of radiological science and technology
• /
• v.44 no.5
• /
• pp.443-449
• /
• 2021

In this study, the purpose is to present the foot inclination angle for realizing an image similar to that of the existing examination method and to present the clinical usefulness of the new examination method through comparison between the existing examination method and the newly designed standing foot oblique projection. A foot phantom was used, and the magnification of the image according to the angle was quantitatively evaluated by attaching a nut to the position of the cuboid of the phantom. The internal oblique image acquired using a 30° wedge was set as the standard image. And that image was compared with the images acquired by changing the angle of the foot from 20° to 65° at intervals of 5°. Image evaluation was performed by 3 radiological technologists, and qualitative evaluation using a Likert 5-point scale for evaluation items of true oblique view and quantitative evaluation of the value obtained by measuring the diameter of a nut in each image were performed as image evaluation. For data analysis, reliability analysis between the measure and comparative analysis of the average value for each angle were performed. The qualitative evaluation score for each image was 4.5 to 5 points for most questions in the case of the standard image. And 4 points or less for most questions in the images with a foot angle of 45° or less, and an evaluation score close to the standard image was obtained in the image of 50° or more. And in the quantitative evaluation, the diameter of the nut was measured to be 9.28~9.56 mm. The qualitative evaluation showed a reliability of 0.95~1.0 and the quantitative evaluation was 0.62. As a result of comparing and analyzing the average of the quantitative and qualitative average values for each angle image, the group with the average value most similar to the standard image was images obtained at 55° and 60°, and in the post-analysis, the images of both groups were the same group as the standard image(p<0.01). As a result of this study, it was found that the angle of inclination of the foot for realizing the image most similar to the existing image in the standing foot oblique projection is 55°~60°. In addition, if this test method is applied to the clinic, it is believed that it will help prevent safety accidents such as falls during the test and improve test efficiency by minimizing the movement of patients for the test.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1830-1835
• /
• 2005

It is important to estimate the distribution of intensity of a magnetic field for application of magnetic method to industrial nondestructive evaluation. Magnetic camera provides the distribution of a quantitative magnetic field with homogeneous lift-off and same spatial resolution. And it is possible to interpret the distribution of the magnetic field when the dipole model is introduced. This study introduces the numerical and experimental considering of the quantitative evaluation of several size and shapes of the cracks using the magnetic field images of the scan type magnetic camera.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.2
• /
• pp.203-210
• /
• 2010

For the development of a better product which fits to the target user population, physical workloads such as reach and visibility are evaluated using digital human simulation in the early stage of product development; however, ergonomic workload assessment mainly relies on visual observation of reach envelopes and view cones generated in a 3D graphic environment. The present study developed a quantitative assessment method of physical workload in a digital environment and applied to the evaluation of a Korean utility helicopter (KUH) cockpit design. The proposed assessment method quantified physical workloads for the target user population by applying a 3-step process and identified design features requiring improvement based on the quantified workload evaluation. The scores of physical workloads were quantified in terms of posture, reach, visibility, and clearance, and 5-point scales were defined for the evaluation measures by referring to existing studies. The postures of digital humanoids for a given task were estimated to have the minimal score of postural workload by finding all feasible postures that satisfy task constraints such as a contact between the tip of the index finger and a target point. The proposed assessment method was applied to evaluate the KUH cockpit design in the preliminary design stage and identified design features requiring improvement. The proposed assessment method can be utilized to ergonomic evaluation of product designs using digital human simulation.

• Journal of Engineering Education Research
• /
• v.22 no.4
• /
• pp.61-70
• /
• 2019

As product development process becomes complex, it becomes more important for engineering students to experience collaborative product development. Especially the collaboration experience based on Product Data Management (PDM) systems is useful, since participants are likely to use the same environment for their professional product development. However, instructors have difficulties to evaluate contribution of each participant to their projects during the practices, since it is hard to trace personal activities for collaborative design processes. To solve this problem, this study suggests a data-driven objective method that analyses product data accumulated in PDM databases to evaluate numerically calculated contributions of participants to their class projects. As a result, the quantitative measures provided by the data-driven analysis with qualitative measures for project results can improve the fairness and quality of evaluation of contributions of participants to collaborative projects. This study implemented the proposed evaluation method with an information system and discussed the result of the application of the system to product development practices.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.4
• /
• pp.152-160
• /
• 2000

This paper presents an efficient evaluation method on the role of new energy storage systems, especially the secondary Battery Energy Storage (BES) systems, in the case where they are interconnected with the power distribution systems. It is important to perform the economic evaluation for the new energy storage systems in a synthetical and quantitative manner, because they are very costly in the early stage of their development and commercialization. In this paper, the multiple functions of BES systems, which are operated at distribution systems, such as load levelling, effective utilization of power distribution systems and uninterruptible power supply at the emergency conditions are classified and analyzed. And then the quantitative evaluation methods of the multiple functions for BES systems are proposed using the mathematical modelling.

• Natural Product Sciences
• /
• v.17 no.4
• /
• pp.321-327
• /
• 2011

In this study, quantitative analysis was developed using HPLC/UVD for the quality evaluation of Scutellariae Radix. For quantitative analysis, six major bioactive compounds were assessed. The separation conditions employed for HPLC/UVD were optimized using Phenomenex $C_{18}$ column ($250{\times}4.6$ mm, 5 ${\mu}m$) with a gradient of solvent A (1% acetic acid of $H_2O$) and solvent B (acetonitrile : methanol : acetic acid = 70 : 30 : 1) as the mobile phase at a flow rate of 1.0 mL/min and a detection wavelength of 275 nm. These methods were fully validated with respect to linearity, accuracy, precision and recovery. The HPLC/UVD method was applied successfully to the quantification of six major compounds in the extract of Scutellariae Radix. The results indicate that the established HPLC/UVD method is suitable for the quantitative analysis and quality control of multicomponents in Scutellariae Radix.