• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2006년도 제26회 춘계학술대회논문집
• /
• pp.218-221
• /
• 2006

가스터빈 엔진의 높은 신뢰성과 운용비의 최소화는 제작자나 사용자 모두에게 중요한 문제이며, 정성적, 정량적 성능저하 예측을 포함한 다양한 성능진단기법이 시도되고 있다. 탈설계점에서의 성능진단은 설계점 성능진단에 비해 학습, 또는 처리해야 할 데이터 규모가 방대함에 따라 예측오차와 수렴도면에서 해결되어야 할 문제점들을 안고 있다. 따라서 이를 위해 본 연구에서는 가스경로해석 기법을 적용한 엔진성능진단코드를 개발하였으며, 이를 스마트 무인기용 터보축 엔진에 적용하여 설계점 및 고도 변화에 따른 탈설계점 영역에 대하여 단일 성능저하를 정량적으로 예측하여 GSP를 통한 예측결과와 비교하였다.

• ETRI Journal
• /
• 제35권6호
• /
• pp.1115-1125
• /
• 2013

This paper presents a scheme for geometric correction of projected content for planar and quadratic projection surfaces. The scheme does not require the projection surface to be perfectly quadratic or planar and is therefore suitable for uneven low-cost commercial and home projection surfaces. An approach based on the recursive subdivision of second-order B$\acute{e}$zier patches is proposed for the estimation of projection distortion owing to surface imperfections. Unlike existing schemes, the proposed scheme is completely automatic, requires no prior knowledge of the projection surface, and uses a single uncalibrated camera without requiring any physical markers on the projection surface. Furthermore, the scheme is scalable for geometric calibration of multi-projector setups. The efficacy of the proposed scheme is demonstrated using simulations and via practical experiments on various surfaces. A relative distortion error metric is also introduced that provides a quantitative measure of the suppression of geometric distortions, which occurs as the result of an imperfect projection surface.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.575-578
• /
• 2000

Die design to minimize the die wear in the cold forging process is very important as it reduce the production cost and the increase of the production rate. The quantitative estimation for the die wear is too hard because the prediction of the die wear is determined with many process variables. So, in this paper, the optimal shape of the backward extrusion punch is newly designed through the FE-analysis considering the surface expansion and Archard's wear model in order to reduce the rapid wear rate that is generated for the backward extrusion product exceeding the forming limit. The main shape variables of the backward extrusion punch are the flat, angle, and round of the punch nose part. As the flat and angle of the punch nose are larger, the surface expansion is reduced. and, the wear rate is decreased according to the reduction of the punch round. These results obtained through this study are applied to the real manufacturing process, it is implemented the reduction of the wear rate.

• 한국정밀공학회지
• /
• 제21권10호
• /
• pp.180-187
• /
• 2004

Die design to minimize the die wear in the cold forging process is very important as it reduce the production cost and the increase of the production rate. The quantitative estimation fur the die wear is too hard because the die wear is caused by many process variables. So, in this paper, the optimal shape of the backward extrusion punch is newly designed through the FE-analysis considering the surface expansion and Archard wear model in order to reduce the rapid wear rate that is generated for the backward extruded products exceeding the forming limit. The main shape variables of the backward extrusion punch are the flat diameter, angle, and round of the punch nose part. As the flat diameter and angle of the punch nose are larger, the surface expansion is reduced and the wear rate is decreased according to the reduction of the punch round. These results obtained through this study can be applied to the real manufacturing process.

• 터널과지하공간
• /
• 제17권1호
• /
• pp.9-16
• /
• 2007

굴진장이 터널의 안정성 및 시공비에 미치는 영향에 대해서는 많은 연구자와 기술자들이 잘 알고 있지만, 아직 굴진장 결정에 대해서 일관된 절차가 수립되지는 못한 실정이다. 본 연구에서는 굴진장을 고려한 연암터널의 막장과 무지보 구간의 거동형태를 실내모형실험, PFC3D 및 FDM 해석을 통하여 조사하였다. 총 다섯 개의 거동형태를 정의하였고, 막장 안전율과 설계 도표를 통해 거동형태를 정량적으로 판단할 수 있도록 하였다. 비록 본 연구에서 제안한 방법이 몇몇 제한을 갖지만, 굴진장과 굴착의 최적화를 위한 유용한 정보를 제공할 수 있을 것으로 사료된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
• /
• pp.311-315
• /
• 1987

In this paper an efficient algorithm to estimate the volume and surface area and the reconstruction algorithm for 3-dimensional graphics are presented. The graph theory is used to estimate the optimal quantitative factors. To improve the computing efficiency, the algorithm to get proper contour points is performed by applying several tolerances. The search and the given arc cost is limited according to the change of curvature of the cross-sectional contour. For mathematical model, these algorithms for volume estimation based on polyhedral approximation are applied to the selected optimal surface. The results show that the values of the volume and surface area for tolerances 1.0005, 1.001 and 1.002 approximate to values for tolerances 1.000 resulting in small errors. The reconstructed three-dimensional images are sparse and consist of larger triangular tiles between two cross sections as tolerance is increasing.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권2호
• /
• pp.75-82
• /
• 2019

The paper aims to investigate the impacts of long-term savings motives on fostering household participation and contribution to savings mechanisms in rural Vietnam. The paper is organized in five parts: introduction, data description, methodology, empirical results, and conclusion. The quantitative methodology is employed and three simultaneous estimation methods, including instrumental variable model, two-step model, and Heckman model are used to test these impacts as well as the robustness of results. In each model, the paper examines the impacts of independent factors on both household participation and household contribution to savings mechanisms. Two sets of independent variables: long-term savings motives (profit-making investment, accumulation for big expenditure, providing for old age, and cost of educations) and control variables (dependency rate, number of people in household, and household wealth) are in each model. A set of dataset of 2,314 households for analysis is obtained from household survey in rural Vietnam. Robust statistical findings indicate that profit-making investment emerged to be the strongest motive fostering household participation to savings mechanisms while other long-term savings motives have little or no impact on fostering household participation to savings mechanisms. In addition, education investment encourages household contribution to savings mechanisms in rural Vietnam.

• 대한토목학회논문집
• /
• 제33권4호
• /
• pp.1295-1302
• /
• 2013

구조물의 변형 형상은 구조해석을 위한 중요한 정보이다. 구조물 모니터링 시스템에서도 충분한 변위 계측점이 확보되어 명확하고 합리적인 구조물의 변형 형상이 도출된다면 이를 이용한 구조해석이 가능 할 것이다. 하지만 실제 구조물에서는 한정된 비용으로 인해 충분한 변위 계측점이 확보되지 못하기 때문에 합리적인 구조물 변형 형상의 도출이 어렵다. 본 연구에서는 경제적이고 합리적인 구조물 변형 형상 추정을 위해 최소의 변위 계측 데이터를 이용한 효과적인 구조물의 거동 형상 추정기법인 SFSM-LS알고리즘을 개발하였다. 본 기법은 구조물의 변형 형상을 추정하기 위해 계측 대상 구조물의 사전 유한요소해석을 통해 여러 구조 거동 형상을 기본 구조형상함수로 정의하고, 이들 함수를 추정 변위의 오차를 최소화 시키는 각 함수의 가중치로써 중첩한다. 2경간 연속교 모델의 수치해석을 통해 개발된 알고리즘을 검증하고 매개변수 연구를 수행하였다. 개발된 알고리즘의 매개 변수인 구조형상함수, 변위 계측 위치, 변위 계측 개소에 대한 형상 추정 결과의 특성을 분석하고 Polynomial, Lagrange, Spline 보간법과 형상 추정 정밀도를 비교하여 개발된 기법의 적용성을 검증하였다. 이를 통해 적은 개소의 변위 데이터로 정밀한 형상을 추정하는 결과를 도출하여 제안된 기법의 우월성을 입증하였다.

• Spatial Information Research
• /
• 제23권3호
• /
• pp.79-89
• /
• 2015

건축물이 일정규모 이상 높아지면 구조설계 시 바람의 영향이 중요한 요인으로 작용하게 된다. 우리나라는 지형적인 특성상 태풍과 같은 위험현상이 자주 발생하는 지역이므로 더욱 중요한 요인이라 할 수 있다. 이러한 시대적 흐름과 기상변화를 고려한다면 건축물의 합리적인 내풍설계의 필요성이 더욱 부각되고 있다. 본 연구에서는 1:5,000 수치지형도를 바탕으로 공간정보분석을 이용하여 설계풍하중 산정방법을 제시하였으며 실제 적용사례와 비교분석 하였다. 제안된 방법으로 풍속고도분포계수, 지형계수를 산정할 경우 보다 정량적, 객관적으로 설계풍속을 산정할 수 있었으며 기존의 방법과 비교했을 때 평가에 필요한 시간과 비용을 단축할 수 있을 것으로 기대되 건축물의 합리적이고 경제적인 내풍설계에 도움이 될 것으로 기대된다.

• 한국환경농학회지
• /
• 제31권1호
• /
• pp.16-23
• /
• 2012

BACKGROUND: To improve the Daechung reservoir water quality, a quantitative estimation of the delivery load from upper watershed need to be conducted prior to others. To do so, an intensive monitoring is necessary because of the complexity and uncertainty of the delivery load from uppper watershed. However, intensive monitoring need to invest much time, cost, and effort. So, many researcher have developed an equation to estimate the delivery loads. But, relatively little research has been conducted on the applicability of pre-developed equation using other sites. Therefore, the objective of this study was to evaluate application of the equation for BOD, T-N and T-P delivery load. METHODS AND RESULTS: To verify the applicability of the equation, the following equation was used; Delivery loads(kg/day)=generated pollutant loads${\times}(1-{\alpha}){\times}$(daily outflow/${\beta})^{\gamma}$. The equations could be calculated the daily delivery loads of streams without any data of water quality, only with the data of daily runoff of study sites. The equations were applied to Youngdogcheon, Chogangcheon, Bocheongcheon, Sookcheon to examine its applicability using monitoring data. The results showed that the estimated delivery loads were in a good agreement with the observed data and indicated reasonable applicability of the equations. CONCLUSION(s): Overall, the equations were satisfactory in estimation of delivery loads at upper watershed of the Daechung reservoir. Therefore, the equations could be contributed to better water quality management in the Daechung reservoir.