• The Journal of the Acoustical Society of Korea
• /
• v.36 no.1
• /
• pp.78-87
• /
• 2017

The goal of the present paper is to objectify the intrinsic subjectivity of sound as a media of music by applying psycho-acoustical methodology to the analysis of a musical work. First, 18 sound samples are extracted from "Symponie Fantastique" written by Hector Berlioz, which is a piece of program music, and then the objective Zwicher's sound quality parameters such as: Loudness, Sharpness, Roughness and Fluctuation Strength are evaluated for each of these sound samples. For subjective sound quality evaluation, 9 representative sound quality adjectives are extracted on a basis of program feature of Symponie Fantastique and the first jury test is carried out by using the numeric rating method and the paired comparison method. Three sound quality adjectives, "bright", "noisy", and "realistic" are extracted from the factor analysis of the first jury test result. On a basis of the computed sound metrics and the second jury test result for the three sound quality adjectives, three sound quality indexes are developed to represent the sound qualities of "Symponie Fantastique".

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.22-28
• /
• 2013

Robotic GMA (Gas Metal Arc) welding process is one of widely acceptable metal joining process. The heat and mass inputs are coupled and transferred by the weld arc to the molten weld pool and by the molten metal that is being transferred to the weld pool. The amount and distribution of the input energy are basically controlled by the obvious and careful choices of welding process parameters in order to accomplish the optimal bead geometry and the desired quality of the weldment. To make effective use of automated and robotic GMA welding, it is imperative to predict online faults for bead geometry and welding quality with respect to welding parameters, applicable to all welding positions and covering a wide range of material thickness. MD (Mahalanobis Distance) technique was employed for investigating and modeling the GMA welding process and significance test techniques were applied for the interpretation of the experimental data. To successfully accomplish this objective, two sets of experiment were performed with different welding parameters; the welded samples from SM 490A steel flats. First, a set of weldments without any faults were generated in a number of repeated sessions in order to be used as references. The experimental results of current and voltage waveforms were used to predict the magnitude of bead geometry and welding quality, and to establish the relationships between weld process parameters and online welding faults. Statistical models developed from experimental results which can be used to quantify the welding quality with respect to process parameters in order to achieve the desired bead geometry based on weld quality criteria.

• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.3
• /
• pp.257-266
• /
• 2014

The semiconductor manufacturing industry is managed by a number of parameters from the FAB which is the initial step of production to package test which is the final step of production. Various methods for prediction for the quality and yield are required to reduce the production costs caused by a complicated manufacturing process. In order to increase the accuracy of quality prediction, we have to extract the significant features from the large amount of data. In this study, we propose the method for extracting feature from the cell level data of probe test process using OPTICS which is one of the density-based clustering to improve the prediction accuracy of the quality of the assembled chips that will be placed in a package test. Two features extracted by using OPTICS are used as input variables of quality prediction model because of having position information of the cell defect. The package test progress for chips classified to the correct quality grade by performing the improved prediction method is expected to bring the effect of reducing production costs.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.2
• /
• pp.207-216
• /
• 2000

This paper introduces an effective system design method to develop a customer oriented product using a design optimization process and to select a set of critical design paramenters,. The process results in the development of a successful product satisfying customer needs and reducing development risk. The proposed scheme adopted a five step QFD(Quality Function Deployment) in order to extract design parameters from customer needs and evaluated their priority using risk factors for extracted design parameters. In this process we determine critical design parameters and allocate them to subsystem designers. Subsequently design engineers develop and test the product based on these parameters. These design parameters capture the characteristics of customer needs in terms of performance cost and schedule in the process of QFD, The subsequent risk management task ensures the minimum risk approach in the presence of design parameter uncertainty. An application of this approach was demonstrated in the development of weld quality monitoring system. Dominant design parameters affect linearity characteristics of weld defect feature vectors. Therefore it simplifies the algorithm for adopting pattern classification of feature vectors and improves the accuracy of recognition rate of weld defect and the real time response of the defect detection in the performance. Additionally the development cost decreases by using DSP board for low speed because of reducing CPU's load adopting algorithm in classifying weld defects. It also reduces the cost by using the single sensor to measure weld defects. Furthermore the synergy effect derived from the critical design parameters improves the detection rate of weld defects by 15% when compared with the implementation using the non-critical design parameters. It also result in 30% saving in development cost./ The overall results are close to 95% customer level showing the effectiveness of the proposed development approach.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1513-1515
• /
• 2004

This paper describe the power quality monitoring results of the grid-connected wind turbine generator in Daegwallyeong Test Site. The power quality monitoring for grid-connected wind turbine generators are important to verify their performance as the grid-connected generators. In order to measure the impacts on the grid of wind turbine generator and evaluate the performance by analyzing electrical parameters, we equipped the power quality monitoring system in the real field of the Daegwallyeong test site. The developed monitoring system gathers information by remote access through the internet. The monitoring results and the detail explanation for the developed wind turbine monitoring system is presented in the study.

• Journal of Environmental Science International
• /
• v.7 no.4
• /
• pp.461-466
• /
• 1998

One hundred and thirty two ground water samples from the Usan area were divided into urban and non-urban groupings and were assessed between 1993 and 1996. The results of statistical analysis were as follows: There were significant differences between the two groupings in the average value of the following water quality parameters: total hardness, nitrate , pH, iron, ammonia and chloride ion in the order of Z-score . Because total hardness, nitrate, and pH were also significant in ANOVA test, these three parameters can be regarded as the most sensitive parameters of artirial pollutants. By the comprehensive com- parison of Ulsan water Quality to that of Kangwon-do, all of the major parameters(pH, KMnO4 consumption, sulfate, chloride and hardness except nitrated were confirmed as being significantly Increased levels.

• Journal of Korean Society for Quality Management
• /
• v.35 no.1
• /
• pp.136-141
• /
• 2007

For many products failures depend on age and usage and, in this case, failures are random points in a two-dimensional plane with the two axes representing age and usage. Models play an important role in decision-making. In this research, an accelerate failure test (AFT) model is proposed to deal with the two-dimensional data. The parameters are proposed to be estimated through maximum likelihood estimators.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1276-1282
• /
• 2013

This paper presents a demosaicking method based on high-order interpolation with parameters. Demosaicking is an essential process in capturing color images through a single sensor-array. Thus, a lot of methods including the Hamilton-Adams(HA) method has been studied in this literature. However, the image quality depends on various factors such as contrast and correlation in color space; existing algorithms depend on test images in use. Consequently, a new test image set was suggested to develop demosaicking algorithms properly. According to previous studies, the HA method shows high performances with the new test data set. In this paper, we improve the HA method using high-order interpolation with parameters. Also, we provide an analysis and formulations for the proposed method. To evaluate our method, we compare our method with the existing methods both objectively and subjectively. The experimental results indicate that the proposed method is superior to the existing methods.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.15 no.1
• /
• pp.16-20
• /
• 2004

Purpose : To assess perceptual, acoustic and aerodynamic measure of voice quality in patients with unilateral vocal cord paralysis before and after type I thyroplasty. Methods : The clinical records of patients operated type I thyroplasty in the Departement of otorhinoalryngolgy, Yongdong Severance hospital from November 2001 to November 2003 were reviewed. All patients uderwent a vocal function evaluation including perceptual, acoustic and aerodynamic measures of voice preoperative and on $60^{th}$ postoperative day. The perceptual and acoustic measures were obtained from recording of patients' reading a 'Sanchak' passage. The perceptual evaluation was performed by 2 speech pathologist using a 4-point rating scale. Acoustic parameters(voice range profile low(RAL), voice range profile high(RAH), average fundamental frequency(AFX), closed quotient, harmonic to noise ratio, jitter and shimmer) were investigated by Lx speech studio. Mean flow rate(MFR), subglottic pressure(Psub) and intensity were measured using the Phonatory function analyzer. The maximum phonation time was also measured. The data were statistically analyzed. A paired t-test (p<0.1) was used to compare preoperative and postoperative results. And multiple regression test was used to find which parameter was most correlated to improvement of postoperative voice quality. Results : Among aerodynamic parameters, Psub $(88.11mmH_2O{\rightarrow}58.7mmH_2O)$, MPT(7.87sec${\rightarrow}$12.53sec), MFR (359.8ml/sec${\rightarrow}$161.06ml/sec) were statistically improved. AFx(205.5Hz${\rightarrow}$163.27Hz), AQx(23.9%${\rightarrow}$48.3%), RAL, RAH. Jotter and shimmer were improved. In multiple regression test, AFx and AQx was noted as the two meost correlated parameters to improvement of postoperative breathiness. But general grade of voice quality was more correlated to Psub and shimmer. Conclusion : Vocal fold medialization procedures effectively reduce glottic gap. Increasing of contact area of both vocal folds induced improvement in aerodynamic parameters and leaded stabilizing of vocal fold vibration. That effect results in improvement in acoustic parameters (shimmer, jitter, signal-to-noise ratio, voice range profile) and voice quality.

• IE interfaces
• /
• v.12 no.4
• /
• pp.496-505
• /
• 1999

Quality of Service(QoS) is the collective effect of service performances and has a direct impact on customer satisfaction. Although QoS is subjective, network performance parameters contributing to QoS can be measured physically. Therefore overall customer satisfaction for each test condition of the performance parameters is evaluated by asking respondents to indicate his or her opinion on a five-category rating scale i.e., excellent, good, fair, poor, and unsatisfactory. The opinion data resulting from the test can then be used to measure and analyze QoS from the customers' viewpoints. In this papaer, we consider two methods for analyzing the opinion data: MOS method and Cumulative Probability Curve method. The former evaluates an arithmetic mean of the opinion scores which quantify the surveyed opinions of respondents. The latter uses graphical and analytical models which are based on the distribution of the opinions rather than an arithmetic mean. The advantages, disadvantages, and an alternative of each method are discussed, together with future directions of research.