• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.705-710
• /
• 2002

Recently, there has been for a number of reasons growing interest in the use of porous concrete, and it is used as an ecological material. But, because the valuation methods of the quality on the fresh porous concrete aren't established up till now, it is difficult that the harden porous concrete is made sure of its required quality. This study is to present the measurement method of the void ratio on the fresh porous concrete and to analyze the influence of water-cement ratio and vibrating time on the binder content covered a coarse aggregate. Results of this study were shown as follows; The measurement methods of the void ratio and aggregate-binder weight ratio on the fresh porous concrete can be useful as data for the quality control of fresh porous concrete.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.4
• /
• pp.87-93
• /
• 2008

With an increased use of alternative aggregate due to exhaustion of quality aggregate resources, the amount of used crushed aggregates have been increased and as a result, development of admixture materials has also been improved and its amount of use is increasing from day to day in order to secure quality in concrete. Accordingly, the purpose of this study is to make concrete of good quality by using chemical admixture developed in this study by replacement rate of fine aggregate. At first, susceptibility, compressive strength ratio and length change ratio in both fresh and hardened concrete were evaluated according to corresponding regulation. As for high performance related regulation, APC NO.3 and PC series were going to rule, and as for AE agent regulation, replacement ratio of fine aggregate of high performance chemical admixture was 10:0 and other chemical admixture met quality regulation for AE agent.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.46 no.1
• /
• pp.107-117
• /
• 2004

Hourly monitoring data from Saemangeum estuary, which is expected to become freshwater, was analyzed to evaluate the water quality characteristics. Higher algal growth at spring season than winter influenced the high ratio of organic nitrogen to total nitrogen and concentration of chemical oxygen demand (COD). About 87.9％ and 59.7％ of organic nitrogen was observed at winter season and spring season, respectively. Daily salinity analysis at the mouth of two main rivers demonstrated that the Dongjin in river was more influenced by tidal effect and showed higher variation than the Mankyung river. The ratio of nitrogen to phosphorus (N/P ratio) was different with site (estuary versus sea area) and season (winter versus spring) remarkably. The N/P ratio was highest (32.74 ∼ 43.93) at estuary in winter and was lowest (1.78 ∼ 3.06) at sea in spring. The high N/P ratio at estuary area implies that phosphorus can be the limiting nutrient factor for algal growth as in general freshwater river, therefore, water quality management practice considering river characteristics rather might be needed in the Saemangeum estuary. The Saemangeum project is nationally recognized for its environmental issues, and especially water quality concern is a critical factor to make policy decision and further assessment with continued monitoring is strongly recommended.

• Journal of Korean Society for Quality Management
• /
• v.27 no.3
• /
• pp.67-78
• /
• 1999

In parameter design introduced by Taguchi, we analyze a performance measure, so called SN ratio. The SN ratio is a function of the expected loss due to the variation of quality characteristic. In this paper, an easy way for developing performance measures is presented, which can be used to control several quality characteristics simultaneously in parameter design. To develop such multivariate performance measures, the transformation method of the expected loss and combining techniques are employed. And the analysis of real empirical data for an application of the proposed method is also presented.

• Atmosphere
• /
• v.26 no.3
• /
• pp.461-471
• /
• 2016

A quality check algorithm for the Weather Information Service Engine pulsed Doppler wind lidar is developed from a view point of spatial and temporal consistencies of observed wind speed. Threshold values for quality check are determined by statistical analysis on the standard deviation of 3-component of wind speed obtained by a wind lidar, and the vertical gradient of horizontal wind speed obtained by a radiosonde system. The algorithm includes carrier-to-noise ratio (CNR) check, data availability check, and vertical gradient of horizontal wind speed check. That is, data sets whose CNR is less than -29 dB, data availability is less than 90%, or vertical gradient of horizontal wind speed is less than $-0.028s^{-1}$ or larger than $0.032s^{-1}$ are classified as 'doubtful', and flagged. The developed quality check algorithm is applied to data obtained at Bucheon station for the period from 1 to 30 September 2015. It is found that the number of 'doubtful' data shows maxima around 2000 m high, but the ratio of 'doubtful' to height-total data increases with increasing height due to atmospheric boundary height, cloud, or rainfall, etc. It is also found that the quality check by data availability is more effective than those by carrier to noise ratio or vertical gradient of horizontal wind speed to remove an erroneous noise data.

• Journal of Integrative Natural Science
• /
• v.13 no.3
• /
• pp.92-96
• /
• 2020

Taguchi's robust parameter design is an approach to reduce the performance variation of quality characteristics in products and processes. In robust design, the signal-to-noise ratio (SN ratio) was used to find the optimum condition to minimize the variation of quality characteristics as much as possible and bring the average of quality characteristics closer to the target value. In this paper, we propose a simultaneous optimization method based on a linear model of the SN ratio as a method to find the optimal condition of the control factor in case of multi-characteristics. In addition, the proposed method and the existing method were compared and studied by taking actual cases.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.567-572
• /
• 2002

This research investigates experimentally an effect on the quality performances of the high flowing concrete according to binder types. The purpose of this study is to determine the optimum mix proportion of the high flowing concrete having good flowability, viscosity and no-segregation. For this purpose, two types using belite cement＋lime stone powder(LSP) and furnace slag cement+lime stone powder are selected and tested by design factors including water cement ratio, fine and coarse aggregate volume ratio. As test results of this study, the optimum mix proportion for binder types is as followings. 1) One type based belite cement ; water cement ratio $51^{\circ}C$, fine aggregate volume ratio $43^{\circ}C$ and coarse aggregate volume ratio $53^{\circ}C$, replacement ratio of LSP $42.7^{\circ}C$. 2) Another type based slag cement : water cement ratio $41^{\circ}C$, fine aggregate volume ratio $47^{\circ}C$ and coarse aggregate volume ratio $53^{\circ}C$, replacement ratio of LSP $13.5^{\circ}C$.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.04a
• /
• pp.130-135
• /
• 1995

We can consider that the study on early evaluation of strength of concrete is useful to raise safety of building and utility of quality control of concrete is useful to raise safety of building and utility of quality control of concrete. In this paper, was proposed to method early to predict strength of concrete with key parameters, such as Water/Cement(W/C) ratio and Sand / Aggregate(S/A) ratio. Through a series of experiment, the obtained results are summarized as follow. $\circled1$ The ratio of resistance was decteased as the increase of W/C ratio. $\circled2$ The maximum value for the ratio of resistance and compressive strength was presented in the case of 40% S/A ratio. $\circled3$ The relationship. of the ratio of resistance and compressive strength on 28days according to the change of W/C and S/A ratio is to be: $F_{28}=-0.00104R^2 + 2.263R - 935.5$ (W/C Ratio) $F_{28} = 0.007R^2 - 10.693R - 4269.1$ (S/A Ratio)

• Journal of the Korean Home Economics Association
• /
• v.8 no.1
• /
• pp.93-99
• /
• 1970

To Know the factors required to make best quality of steamed rice with large amount of rice, several organizations that serve meals were surveyed. Factor that mostly influence the amount of water to the amount of rice is a kind or rice. In the case of good quality rice, when the amount of rice is more than 10cups, the ratio of water to rice is 0.9 and that of poor quality rice is 0.7 Average ratio is 0.8 Therefore, ordinarily with the ratio of 0.8, good quality of steamed rice can be made. Washed rice should be used to measured the of rice. To make a good quality of steamed rice with large amount of rice, center part of the boiling rice should be stirred generously several times to equalize the temperature.

• Korean Journal of Community Nutrition
• /
• v.10 no.6
• /
• pp.880-891
• /
• 2005

The purpose of this study was to investigate nutrients intakes and nutritional quality of Adults and Elderly People in an island area (Wando). A three-day dietary intakes survey, using a 24 hour recall method was obtained from 187 subjects aged 46 to 84 (mean age 65.3) living in an island area (Wando). Nutient intakes were analyzed using CAN-Pro soft program and compared to Korean RDA. The quality of nutrients was assessed by analyzing nutrient adequacy ratio (NAR), mean adequacy ratio (MAR), and index of nutritional quality (INQ). The average daily mean energy intakes were 1869.0 kcal for males and 1943.9 kcal for females, respectively. Daily intakes of protein for males and females were 28.0 and 30.4 g and those of fat were 31.5 and 28.51 g, respectively. Nutrient consumed below $75\%$ of Korean RDA was protein, vitamin A, Ca and Zn in both males and females. Average CPF ratio of males and females were 78.8 : 6.0 : 15.1 and 80.0 : 6.4 13.4, respectively. Energy intake ratio from protein was significantly higher in over 60 years males. Carbohydrate dependency decreased with age. Protein dependency increased with age. Nutrient adequacy ratio (NAR) of energy, protein vitamin A and vitamin E were increased with age in males. The mean adequacy ratio (MAR), an index of overall dietary quality, were not significantly different by age group. Average MAR for males and females was 0.77 and 0.78, respectively. The index of nutritional quality (INQ) showed the tendency to decrease with age. Especially, there were significantly decreases in INQ of all nutrients, except protein, with age. Based on these results, it is evident that people in the island area did not consume enough nutrients. Specially, dietary intake of protein, vitamin A, vitamin E, and Ca were not adequate. (Korean J Community Nutrition 10(6) : $880\∼891$, 2005)