• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.24-29
• /
• 2000

This paper is experimental study of machining characteristics about martensitic heat resisting steel STR11. Machining characteristics are different according to internal quality(chemical compositions, microscopic structure and nonmetallic inclusion) mechanical properties(tensile strength value impact value and hardness) and dynamic cutting force. Following are the results : 1. In analyzing internal quality test materials have typical martensite structure and a minute needle-shaped structure. 2. Tensile strength and reduction of area and hardness are larger. But values of elongation and impact values are smaller. Fracture surface of tensile specimen is ductile. 3, Cutting force is decreasing with cutting speed increasing 4. Cutting force is increasing with feed speed increasing.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.10 no.1
• /
• pp.117-123
• /
• 2022

Recently, due to COV ID-19, many people are spending most of their time indoors. So, there is a rising interest on the indoor air quality in the field of building construction. The main sources for the indoor air pollution are human indoors activity, building materials, living supplies and the polluted air from outdoor. The Korean government has designated 17 indoor air pollutants including fine dust, total airborne bacteria, fungi and carbon dioxide, etc.. Most people are always exposed to assorted bacteria and molds in our daily life, because indoor environment for human, moderate temperature are humidity, it is favourable to the growth of most of bacteria and fungi. Pine needles have an antibacterial effect against bacteria and fungi. In this study, the antibacterial activity against bacteria and fungi was tested by cement matrix using pine needle extract. As a result, the cement matrix using pine needle extract showed antibacterial activities against bacteria, but in the case of fungi, it did not show antifungal activity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.1073-1077
• /
• 1997

In this paper, we have studied internal quality including chemical compositions, microscopic structure and nonmetalic inclusion of test materials. We have analyzed machining characteristics including tensile strength value, impact value, hardness value etcs. Test materials are usd martensitic heat resisting steel, STR11 and STS420J2. The obtined results are as follows : 1. In analyzing internal quality, STR11 and STR420J2 have typical martensite structure and a minute needle-shaped structure. 2. Tensile strength and reduction of area and hardness value are large STR11 than STS420J2. But elongation impact are smaller STR11 than STS420J2. 3. Fracture surface of tensile speciman is ductile in STR11 and STS420J2.

• Journal of Acupuncture Research
• /
• v.34 no.3
• /
• pp.59-69
• /
• 2017

Objectives : This study analyzed the current status of randomized controlled trials (RCTs) of miniscalpel acupuncture for lumbar spinal stenosis (LSS) in China. Methods : A literature search was performed using the China National Knowledge Infrastructure (CNKI) database. All studies up to June 7th, 2017 were searched. The quality of included RCTs was assessed with the Jadad scale. Results : Five RCTs were finally included in this review. The overall quality of the RCTs was assessed as low. All articles evaluated miniscalpel acupuncture as monotherapy or in combination with filiform needle therapy, drug injection therapy, Tuina treatment, thermal coagulation therapy, or spinal decompression. Miniscalpel acupuncture as monotherapy or adjunctive therapy showed greater therapeutic effect and fewer adverse effects. Conclusion : Miniscalpel acupuncture is a safe and effective nonpharmacological treatment for LSS. However, high-quality studies with consistent treatment protocols are needed to confirm these findings.

• Journal of Acupuncture Research
• /
• v.33 no.2
• /
• pp.151-164
• /
• 2016

Objectives : The purpose of this study is to review clinical studies about the efficacy of fire needling for the treatment of acne vulgaris. Methods and Results : In this review, Oasis, NDSL, CNKI, PubMed, Cochrane, J STAGE and CINII were used as the main databases for searching for medical journals, using the keywords "acne and fire needling"," acne and fire needle"," acne and fire acupuncture", and" acne and red hot needle". The initial search range included only randomized controlled trials (RCTs), and papers not matching inclusion criteria were excluded. Initially a total of 108 studies were found, with ten being excluded during title and abstract screening. After scanning 98 papers, a total of 31 RCTs were selected and analyzed. In the 31 RCTs, patients with acne were randomized into groups for treatment and control. Specifically, the treatment group received fire needling, while the control group were concurrently given other treatments. The results of the completed studies have shown that the treatment group receiving fire needling demonstrated significant improvement compared to the control group. Conclusion : During our study, it was verified that the efficacy of fire needling for the treatment of acne vulgaris was both significant and meaningful. Therefore, fire needling can be a safe and effective alternative treatment for acne. However, to confirm this result, further investigation in a traditional clinic is required, accompanied by high quality studies including randomized, placebo-controlled double-blind trials.

• Korean Journal of Acupuncture
• /
• v.27 no.1
• /
• pp.159-168
• /
• 2010

Objective: ZhangJinYoPian(藏珍要編, ZJYP) is a book witten by Song-WooGe in the late 19th century. While Korea has lost this book to tell us Korea traditional acupuncture treatment in the late 19th century, This book appeared as a manuscript in Japan. There is no reaserch or study carried out for this book. Furthermore, a few people know existence of this book. So I analyzed acupuncture treatment of the ZJYP and sort out the distinctive feature of it. Method: For that, I studied bibliographic information of this book and classified contents of it into three parts - medical thought, needle manipulation and acupoint selection to consider it's caracteristics. Results and Conclusions: 1. The author of ZJYP thought that weakness of good power in the body and strongness of evil power out of the body cause a disease. so Doctor should examine quality of both to care patient's pain. 2. The author of ZJYP thought that needle manipulation is one of the most important thing. Doctors can use needle manipulation to control patient condition. Especially, he suggested cooling and heating manipulation except reinforcement and reduction. 3. He stressed viscera and bowels. he located viscera and bowels theory in front of the book to explain relationship of these. It shows us that ZJYP maintained academic characteristics of acupuncture in Chosun-Korea. 4. While He minimized the number of acupoints used in treatment, he multiplied its combination. He selected one or two acupoints from each meridian pathway. It include Eight Confluent points(八脈交會穴). But these points were used in different ways to control the viscera and bowels, not to care the eight extra meridians.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.44 no.2
• /
• pp.296-301
• /
• 2015

The effects of pine needle powder (PNP) on the physicochemical characteristics of tofu were investigated, and consumer acceptance test was conducted. The pH, moisture content, and lightness and yellowness significantly decreased with increasing PNP concentration from 0 to 0.8% (P<0.05). Hardness increased significantly with increasing PNP concentration (P<0.05). Antimicrobial effects of PNP incorporated into tofu were also investigated. Antioxidant activities of control and produced tofu were compared based on 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical scavenging activity and total polyphenol contents. DPPH radical scavenging activity and total polyphenol contents increased significantly (P<0.05) and were well-correlated. Tofu with 0.2% PNP is recommended (with respect to overall preference score) for taking advantage of the functional properties of PNP without sacrificing consumer acceptability.

• Journal of Acupuncture Research
• /
• v.26 no.2
• /
• pp.125-145
• /
• 2009

Objectives : To analyze the inclusion criteria of participants, control group interventions, and the results of prior studies of acupuncture for OA. Also to identify aspects of the procedure that are associated with positive outcomes in order to establish ideal acupuncture treatment model. And to assess the methodological quality of the trials with modified Jadad score and FEAS in order to evaluate the quality of prior studies and find out whether or not acupuncture has a positive effect in treating OA. Methods : Articles up to the date of November 2008 were searched via computerized databases of PubMed, Journal of Korean Oriental Medicine, The Journal of Korean Acupuncture & Moxibustion Society and Journal of Oriental Rehabilitation Medicine. Bibliographies of reviewed papers were also searched and reviewed. Only randomized controlled trials (RCTs) and systematic reviews concerning the effects of acupuncture or electroacupuncture (EA) on symptoms of osteoarthritis of the human knee, published in English and Korean were included. The acupuncture treatment methods of the reviewed trials were assessed based on STRICTA. And the methodological quality of the trials was assessed by modified Jadad score and FEAS. Results : Twenty one trials of acupuncture for OA were analyzed. Based on the results of this review the following factors might contribute to optimal results from acupuncture treatment. 1) Usage of $ST_{35}$, $GB_{34$, $EX_{32}$, $ST_{36}$ and $SP_9$ acupuncture points. 2) More than four acupuncture points should be used. 3) More than 15 minutes of needle retention time. 4) Needle length-40mm and diameter-0.30mm 5) Usage of EA 6) more than 10 times treatment 7) Treatment frequency of more than once a week, 8) Treatment duration longer than 6 to 8 weeks. Conclusions : High quality clinical trials of Acupuncture for OA is still in lack. Future investigators must concentrate their attentions on the quality of acupuncture treatment itself used in the trials as well as the methodological quality of trials.

• Journal of Technologic Dentistry
• /
• v.19 no.1
• /
• pp.43-54
• /
• 1997

This investigation is carried out of inqurie into the effects of the accelerator on the setting time and haedness when it is used with plaster products. Plaster($\beta$), dental hard stone($\alpha$), and limproved dental hard stone($M{\alpha}$) are selected as the objects of the investigation, since they are most common materials for dental plaster products. Setting time is gauged by means of Vicket Needle and Gilmore Needle, and hardness is gauged by means of Brinell and Vicket Hardness machines. Samples of each material are made in the standerd water powder ratio and with the accelerator repectively, Every material is tested five times each. The results of the tests are as fallow : 1) In each case the setting time is shortened when the accelerator is used. 2) Of the three materials the hardness of the plaster was lowest A($\beta$) < B($\alpha$) < C($M{\alpha}$)} 3) In each case the hardness of the samples made in the standard water powder ratio were higher than that of the sample made with the accelerator. A1 > A2 ; B1>B2 ; C1>C2 4) Final Conclusion : Higher quality cast is expected when it is made in the standard water powder ratio.

• Journal of Acupuncture Research
• /
• v.36 no.3
• /
• pp.131-139
• /
• 2019

Background: This study aimed to investigate the correlation between heat transmission and intervention factors for warm acupuncture (such as features of acupuncture material and moxa, the treatment method, and clinical symptoms). Methods: Korean, English, Chinese and Japanese databases were analysed. Experimental studies that explored the association between thermal stimulation delivery and warm acupuncture intervention factors were included. The peak temperature, time to reach the peak temperature, and time of the effective stimulus, were set as the major parameters and analysed. Results: A total of 12 studies were included. Two studies were associated with the acupuncture needle material, 4 studies associated with the moxa mass, 1 study associated with the moxa density, 2 studies associated with the location of ignition, and 1 study associated with treatment environment were reviewed. The reporting quality of the 12 studies was low. Conclusion: This study provided limited information because of the heterogeneity of materials and parameters depending on each experiment. Further studies should clarify the correlation between heat transmission and intervention factors for warm acupuncture.