• Korean Journal of Optics and Photonics
• /
• v.15 no.5
• /
• pp.423-428
• /
• 2004

The development of a compact and high performance MWIR thermal imaging sensor based on the SOFRADIR 320${\times}$240 element IRCCD detector is described. The sensor has 20 magnification zoom optics with the maximum 40$^{\circ}$${\times}$30$^{\circ}$ of super wide field of view and 7.6 cycles/mrad of resolving power with the operation of attached micro-scanning system. In order to correct nonuniformities of detector arrays, we have proposed a multi-point correction method using defocusing of the optics and we have acquired the highest quality images. The MRTD of our system shows good results below 0.05K at spatial frequency 1 cycles/mrad at narrow field of view. Experimental data and obtained performances are presented and discussed.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.5
• /
• pp.335-344
• /
• 2003

The image compression based on discrete wavelet transform has been widely accepted in industry since it shows no block artifacts and provides a better image quality when compressed to low bits per pixel, compared to the traditional JPEG. The coefficients generated by discrete wavelet transform are quantized to reduce the number of code bits to represent them. After quantization, lossless coding processes are usually applied to make further reduction. This paper presents a new and efficient lossless coding algorithm for quantified wavelet coefficients based on the statistical properties of the coefficients. Combined with discrete wavelet transform and quantization processes, our algorithm has been implemented as an image compression chip, using 0.5${\mu}{\textrm}{m}$ standard cells. The experimental results show the efficiency and performance of the resulting chip.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.9-17
• /
• 2013

Hourly horizontal global solar radiation has been used as one of significant parameters in a weather file for building energy simulations, which determines the quality of building thermal performance. However, as about twenty two weather stations in Korea have actually measured the horizontal global sola radiation, the weather files collected in other stations requires solar data simulation from the other meteorological parameters. Thus, finding the reliable complicated method that can be used in various weather conditions in Korea is critically important. In this paper, three solar simulation models were selected and evaluated through the reliability test with the simulated hourly horizontal global solar radiation against the actually measured solar data to find the most suitable model for the south east area of Korea. Three selected simulation models were CRM, ZHM, and MRM. The first two models are regression type models using site-fitted coefficients which are derived from the correlation between measured solar data and local meteorological parameters from the previous years, and the last model is a mechanistic type model using the meteorological data to calculate conditions of atmospheric constituents that cause absorption and scattering of the extraterrestrial radiation on the way to the surface on the Earth. The evaluation results show that ZHM is the most reliable model in this area, yet a complicated hybrid simulation methods applying the advantages of each simulation method with the monthly-based weather data is needed.

• Food Science and Preservation
• /
• v.16 no.1
• /
• pp.17-22
• /
• 2009

This study analyzes consumers preferences and price sensitivity when buying domestic wine. Data were collected from the consumers (n=200) living in Daegu, Korea. Statistical analyses evaluated purchase, frequency, perceptual mapping, and price sensitivity measurement (PSMs) using SPSS software. Among three domestic wines, ice wine (Vin Coree) attracted most customer satisfaction. The second most popular wine was a white wine (Vin Coree) and the third was a red wine (Royal Campbell). The colors of the red and white wines were highly valued, and bottle design was reported to be the best feature of ice wine. Red wine needs to increase in price and to improve in quality because the price is lower than the point of marginal cheapness. White wine should be reduced in price because the price is higher than the optimal pricing point. The price of ice wine is equal to the point of marginal expensiveness; Thus, the price of ice wine should be reduced.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.42-49
• /
• 2000

A major technical issue related to supporting multiple classes of service in IMT-2000 is the efficient management of limited channel. The selection of channel access control technique has a significant impact on user QOS, system capacity, and is therefore an important design parameter. In this paper, to achieve the service at resonable QOS level, while utilizing channel resource effectively, some improved methods are proposed by analyzing of the recently released methods.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2765-2770
• /
• 2014

Rear view cameras which help to park or to drive backward has been distributed through after-market, but it is inconvenient because they do not provide views of left, right and front sides. Around view monitoring(AVM) systems which can monitor around vehicle at a glance have been developed and equipped by vehicle vendor but systematic studies on these systems is lack. While the AVM system which equipped on Infiniti cars of Nissan is adequate to monitor around vehicle at a glance, it has disadvantages that additional cabling because of using analog cables is required and image quality is lowered due to EMI/EMC intervention. The around view monitoring system implemented in this paper has advantages that there are no EMI/EMC problems because of using optical network and that cabling is simple because of using plug-and-play ways. Additionally, an advantage of MOST150 network is that camera nodes and display node can be easily installed in the form of plug-and-play.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.6
• /
• pp.478-487
• /
• 2003

In this paper, a type and special feature of Multi-level inverter used in medium-voltage and high-capacity motor driver is introduced. Especially, a power quality and structural advantages of H-Bridge Multi-level inverter is described. It presented the specific structure of power circuit, design method, controller composition and PWM techniques of the cascaded H-Bridge Multi-level inverter which is developed. The feasibility of the developed product based on 3,300V lMVA 7-level H-bridge inverter was studied by experiments and we get conclusion that 1)generate of near-sinusoidal output voltage; 2)is low dv/dt at output voltage; 3)reduce the harmonic injection at input; Experiment demonstrate that it is very economical in productivity because of using the existing production technique and examination equipment, and has the reliability and a good maintenance due to the structure of Power Cell unit combination as well as low cost IGBT.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.5
• /
• pp.605-614
• /
• 2005

In this paper, we present the design and implementation of an agent knowledge and QoS tuning methodology to improve the flexibility of agent-based flexible video-conference system. In order to improve the flexibility during video-conferencing, we propose a new T-INTER(Tuning-INTER) architecture of knowledge part in video-conference manager (VCM) agent in which an automatic QoS parameter tuning method is imbedded. The flexible video-conference system structured based on the proposed architecture can cope with the changes in service quality required by users. The VCM agent cooperates with other agents by protocols and executes the automatic QoS parameter tuning task whenever needed. By the tuned parameters, the system is able to flexibly cope with the internal or external changes and the burden of users can be decreased. In the experimental section, it is shown that our proposed system outperforms the existing system.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.5
• /
• pp.9-16
• /
• 2021

In this paper, we propose a building exploration drone that can be used for a digital twin-based building control system. The existing building control system using a fixed position sensor box has a problem that a management blind spot occurs. And because people patrol themselves, it takes a lot of human resources. In this paper, a drone equipped with a temperature and humidity sensor and a gas leak detection sensor is used to search the internal path of the building centering on the control blind spot. It also aims to solve the problem of the building control system by transmitting information in real time along with the video. In addition, it has a stable hovering function using an optical floor sensor and can be applied to an existing digital twin-based building control system. The results of this study are believed to be of great help in improving the quality of digital twin control systems using drones.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.344-349
• /
• 2018

This paper proposes a method of designing the main parameters of the Teflon coating equipment of a guide wire used in medical treatment. The proposed device was designed to be guided by a reel-to-reel method in which the guide wire performs all processes continuously, such as Teflon coating and heat treatment. At this time, the conveyed guide wire vibrates between the rollers, which affects the quality of the coating. Therefore, this paper proposes a dynamic equation of the guide wire to be transported in the longitudinal direction, and design parameters setting method of the feed speed and the interval of the roller supporting the wire is proposed to minimize the vibration amplitude of the guide wire during transport. The Teflon coating of the medical guide wire was carried out based on the developed coating equipment. The target coating thickness of the guide wire was set to less than $10{\mu}m$ in the circumferential direction, and the results were examined by optical microscopy.