• Nutrition Research and Practice
• /
• v.12 no.1
• /
• pp.69-77
• /
• 2018

BACKGROUND/OBJECTIVES: Metabolic risk factors should be managed effectively in patients with type 2 diabetes mellitus (T2DM) to prevent or delay diabetic complications. This study aimed to compare the self-management levels of diet and metabolic risk factors in patients with T2DM, according to the duration of illness, and to examine the trends in self-management levels during the recent decades. SUBJECTS/METHODS: Data were collected from the Korea National Health and Nutrition Examination Surveys (KNHANES, 1998-2014). In our analysis, 4,148 patients with T2DM, aged ${\geq}30years$, were categorized according to the duration of their illness (< 5 years, 5-9 years, and ${\geq}10years$). Demographic and lifestyle information was assessed through self-administered questionnaires, and biomarker levels (e.g., fasting glucose level, blood pressure, or lipid level) were obtained from a health examination. Dietary intake was assessed by a 24-recall, and adherence level to dietary guidelines (meal patterns and intake levels of calories, carbohydrates, vegetable/seaweed, sodium, and alcohol) were assessed. Multivariable generalized linear regression and unconditional logistic regression models were used to compare the prevalence rates of hyperglycemia, dyslipidemia, and hypertension according to the duration of patients' illness, accounting for the complex survey design of the KNHANES. RESULTS: In the multivariable adjusted models, patients with a longer duration (${\geq}10years$) of T2DM had a higher prevalence of hyperglycemia than those with a shorter duration of T2DM (< 5 years) (odds ratio 2.20, 95% confidence interval 1.61-3.01, P for trend < 0.001). We did not observe any associations of disease duration with the prevalence of hypertension and dyslipidemia. In addition, the adherence levels to dietary recommendations did not significantly differ according to disease duration, except adherence to moderate alcohol consumption. There were significant decreasing trends in the prevalence of hyperglycemia in patients with a duration of illness ${\geq}10years$ (P for trend = 0.004). CONCLUSION: Although the proportion of patients with adequate control of glucose levels has improved in recent decades, poorer self-management has been found in those with a longer disease duration. These findings suggest the need for well-planned and individualized patient education programs to improve self-management levels and quality of life by preventing or delaying diabetic complications.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.7
• /
• pp.1029-1035
• /
• 2005

A 3${\times}$4 factorial field experiment with a complete randomised split-plot design with four replicates was conducted from June 2002 to March 2003 at the experimental farm of the Nong Lam University, Ho Chi Minh City, Vietnam, to determine effects of different harvesting heights (10, 30 and 50 cm above the ground) and cutting intervals (45, 60, 90 and 285 days) on yield of foliage and tubers, and chemical composition of the foliage. Cassava of the variety KM 94 grown in plots of 5 m${\times}$10 m at a planting distance of 30 cm${\times}$50 cm was hand-harvested according to respective treatments, starting 105 days after planting. Foliage from the control treatment (285 days) and all tubers were only harvested at the final harvest 285 days after planting. Dry matter and crude protein foliage yields increased in all treatments compared to the control. Mean foliage dry matter (DM) and crude protein (CP) yields were 4.57, 3.53, 2.49, and 0.64 tonnes DM $ha^{-1}$ and 939, 684, 495 and 123 kg CP $ha^{-1}$ with 45, 60, 90 and 285 day cutting intervals, respectively. At harvesting heights of 10, 30 and 50 cm the DM yields were 4.27, 3.67 and 2.65 tonnes $ha^{-1}$ and the CP yields were 810, 745 and 564 kg $ha^{-1}$, respectively. The leaf DM proportion was high, ranging from 47 to 65%. The proportion of leaf and petiole increased and the stem decreased with increasing harvesting heights and decreasing cutting intervals. Crude protein content in cassava foliage ranged from 17.7 to 22.6% and was affected by harvesting height and cutting interval. The ADF and NDF contents of foliage varied between 22.6 and 30.2%, and 34.2 and 41.2% of DM, respectively. The fresh tuber yield in the control treatment was 34.5 tonnes $ha^{-1}$. Cutting interval and harvesting height had significant negative effects on tuber yield. The most extreme effect was for the frequent foliage harvesting at 10 cm harvesting height, which reduced the tuber yield by 72%, while the 90 day cutting intervals and 50 cm harvesting height only reduced the yield by 7%. The mean fresh tuber yield decreased by 56, 45 and 27% in total when the foliage was harvested at 45, 60 and 90 day cutting intervals, respectively. It is concluded that the clear effects on quantity and quality of foliage and the effect on tuber yield allow alternative foliage harvesting principles depending on the need of fodder for animals, value of tubers and harvesting cost. An initial foliage harvest 105 days after planting and later harvests with 90 days intervals at 50 cm harvesting height increased the foliage DM and CP yield threefold, but showed only marginal negative effect on tuber yield.

• Journal of Korean Home Economics Education Association
• /
• v.19 no.2
• /
• pp.103-114
• /
• 2007

The purpose of this study is to satisfy students in adolescent trends of school uniforms and to provide them with useful material with matching current fashions by analyzing the attitude of students toward uniform transformation in female highschool students and investigating factors influencing on behaviors of uniform transformation. The subjects of this study are 30 students in Daegu with the basic ways of investigating such as depth interview and survey. The results are as follows; First, students agree to wearing school uniforms. As the main reason for wearing school uniforms, students put emphasis on peer pressure. It is also analyzed that the figure of students' body have some influence on the attitude of students toward wearing uniform while students' appearance have no influence on the attitude of students toward wearing uniform. Second, students showed high satisfaction in school uniforms. While students are satisfied with design and color of school uniform, they are not satisfied with practicality, economic efficiency and the quality of textile. Third, the study shows most students have experience of uniform transformation as a result of depth interview about actual condition of uniform transformation. Whereas students usually wear the jacket with its width and length shortened, they tend to lengthen skirt and unstitch pleat of skirt. Fourth, there are many reasons for uniform transformation as a result of depth interview with students. Transformation for satisfying aesthetic desire tops the list, followed by transformation for matching, transformation for peer pressure. As shown by the results above, every school needs to make various efforts to satisfy students, teachers and parents by considering and using students' opinion in order to choose the better school uniforms. In addition, the study related to school uniform transformation need to have more various investigating ways to acquire more authentic results such as expanding the subjects to not only students but also teachers and parents and in-depth comparison between subjects.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.1
• /
• pp.153-161
• /
• 2015

In this paper, we propose a locomotor evaluation System for mouse based on continuous shooting images. In the field of veterinary medicine and animal studies are subjected to using the mouse for the quality of human life. In particular, during the experiments using the artificially created mice injury, through a variety of scoring and a lot of experiments to measure the extent of recovery from the injury. The traditional method of measuring the quantity of exercise while in this experiment was made of a method for directly observing person. The proposed system performs the continuous shooting per unit of time specified by the movement of the mouse is extracted from a continuous image shooting with the outline of a mouse point cloud. And using the extracted point cloud to extract again the inner contour of the body of the mouse. So using the new point cloud obtained its center, Then, using the center point calculated by accumulating the distance between two points on locomotor evaluation system design and implement to obtain the total distance the mouse moves over a unit of time.

• The Journal of Internal Korean Medicine
• /
• v.39 no.6
• /
• pp.1191-1205
• /
• 2018

Objectives: This study was performed to review clinical research trends in the treatment of primary headache disorders with pharmacopuncture. Methods: We searched clinical studies on primary headache disorders treated with pharmacopuncture in four electronic databases including OASIS, RISS, CNKI, and Pubmed. The selected studies were analyzed with regard to study design, subject, intervention, evaluation, and result. Results: Five randomized controlled trials, one non-randomized controlled trial, one before-and-after study, and six case series were selected. Most of the studies showed that pharmacopuncture treatment was significantly effective in treating primary headache disorders; however, the quality of the randomized controlled trials was low. Conclusions: According to this study, pharmacopuncture could be a useful treatment option for primary headache disorders. Based on these results, further studies on the effectiveness and safety of pharmacopuncture for primary headache disorders should be performed in the near future.

• Journal of Korea Foundry Society
• /
• v.41 no.6
• /
• pp.550-557
• /
• 2021

With the advent of the fourth industrial revolution, the interest in the internet of things (IoT) in manufacturing is growing, even at foundries. There are several types of process data that can be automatically collected at a foundry, but considerable amounts of process data are still managed based on handwriting for reasons such as the limited functions of outdated production facilities and process design based on operator know-how. In particular, despite recognizing the importance of converting process data into big data, many companies have difficulty adopting these steps willingly due to the burden of system construction costs. In this study, the field applicability of IoT-based devices was examined by manufacturing devices and applying them directly to the site of a centrifugal foundry. For the centrifugal casting process, the temperature and humidity of the working site, the molten metal temperature, and mold rotation speed were selected as process parameters to be collected. The sensors were selected in consideration of the detailed product specifications and cost required for each process parameter, and the circuit was configured using a NodeMCU board capable of wireless communication for IoT-based devices. After designing the circuit, PCB boards were prepared for each parameter, and each device was installed on site considering the working environment. After the on-site installation process, it was confirmed that the level of satisfaction with the safety of the workers and the efficiency of process management increased. Also, it is expected that it will be possible to link process data and quality data in the future, if process parameters are continuously collected. The IoT-based device designed in this study has adequate reliability at a low cast, meaning that the application of this technique can be considered as a cornerstone of data collecting at foundries.

• Journal of Appropriate Technology
• /
• v.6 no.2
• /
• pp.94-102
• /
• 2020

Renewable energy (RE) is essential to comprise sustainable societies, especially, in rural villages of developing countries. Furthermore, application of off-grid RE systems to health care can improve the quality of life. In this research, a RE-based vaccination supply management system was constructed to enlarge the cold-chain in developing countries for the safe storage and delivery of vaccines. The system was comprised of the construction of RE plants and development of vaccine carriers. RE plants were constructed and connected to health posts in local villages. The cooling mechanism of vaccine carriers was improved and monitoring devices were installed. The effect of the system on vaccine cold-chain was evaluated from the field test and topographical analysis in the southern village of Nepal. RE plants were normally operated for the vaccine refrigerator in the health post. The modified vaccine carriers had a longer operation time and better temperature control via monitoring and RE-based recharging functionality. The topographical analysis estimated that the system can cover larger region. The system prototype showed great potential regarding the possibility of a sustainable and enlarged cold-chain. Thus, RE-based vaccine supply management is expected to facilitate vaccine availability while minimizing waste in the supply chain.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.1
• /
• pp.58-72
• /
• 2009

In this study, the organic matter and biomass was characterized by using respirometry based on ASM No.2d (Activated Sludge Model No.2d). The activated sludge models are based on the ASM No.2d model, published by the IAWQ(International Association on Water Quality) task group on mathematical modeling for design and operation of biological wastewater treatment processes. For this study, OUR(Oxygen Uptake Rate) measurements were made on filtered as well as non-filtered wastewater. Also, GC-FID and LC analysis were applied for the estimation of VFAs(Volatile Fatty Acids) COD(S_A) in slowly bio-degradable soluble substrates of the ASM No.2d. Therefore, this study was intended to clearly identify slowly bio-degradable dissolved materials(S_S) and particulate materials(X_I). In addition, a method capable of determining the accurate time to measure non-biodegradable COD(S_I), by the change of transition graphs in the process of measuring microbial OUR, was presented in this study. Influent fractionation is a critical step in the model calibrations. From the results of respirometry on filtered wastewater, the fraction of fermentable and readily biodegradable organic matter(S_F), fermentation products(S_A), inert soluble matter(S_I), slowly biodegradable matter(X_S) and inert particular matter(X_I) was 33.2%, 14.1%, 6.9%, 34.7%, 5.8%, respectively. The active heterotrophic biomass fraction(X_H) was about 5.3%.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.17 no.3
• /
• pp.147-159
• /
• 2014

Public transportation ridership and walkability of urban district can be enhanced through high quality of TOD(Transit Oriented Development) elements. Generally, TOD have been evaluated several physical components such as the diversity of land use pattern, accessibility of public transportation and aspects of urban design around the station area. Especially, Spatial characteristics of TOD planning elements have many potential dependent when considering the characteristics of Rail Station-Influenced Area Development which is performing around subway station. Therefore, researchers should be considering the variation of spatial properties for planning elements according the set of spatial area and their socioeconomic factors. However, existing many cases related TOD does not consider about this point. In this paper, the changes of TOD characteristics were analyzed by different spatial units surrounding subway station in Busan Metropolitan City. Multiple Regression Analysis was performed for an investigation of effective spatial unit of TOD planning elements in this area using subway ridership data. In addition, the application validity of socioeconomic variables was examined through a comparative analysis of regression results with the multiple regression that implied only physical TOD elements. As the result, the variation of spatial properties for TOD planning elements according to the set of spatial unit was found. Furthermore, the specific spatial unit to applicable TOD elements in this area was derived. And the multiple regression model which added socioeconomic variables was derived more improved estimate results than the multiple regression model that implied only physical TOD elements.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.1
• /
• pp.73-81
• /
• 2011

The ultimate goal of construction is to complete the given work in the most economical and safest way within the required construction period while meeting the quality standards specified in the design drawing. There are a few characteristics of finish work. First, executed in subdivided processes, finish work involves a very diverse and complex structure. Second, there are no criteria for each segmented process with regard to the appropriate time of input. Third, it is not very necessary to set priorities for lead and lag works. This study intends to provide information on the completion of a project in accordance with the required duration by setting priorities in the delay of each detailed process of finish work to minimize delay in finish work. In this study, finish work is divided into wet work and other types of finish work, and the importance of each process is classified based on the given details of each process. In addition, the study employs a survey to analyze delay factors of a designer, a constructor, and a supplier. Using the survey results, the study sets priorities in delay of final work to provide information on the completion of an apartment project within the planned construction period.