• The Research Journal of the Costume Culture
• /
• v.17 no.2
• /
• pp.320-329
• /
• 2009

This research attempts to develop a method to relieve dysmenorrhea, which is an obstacle to many women's social activities, by designing a smartwear with built-in thermotherapy and TENS device. TENS therapy has the advantages of being controlled by patients and not depending on the use of drugs. The TENS device is designed as a stomach band so as to be unnoticeable to others when outer clothes are worn; the size was minimized and attached to underwear to facilitate use everywhere at any time. A current problem is the limitation of minimizing, but as battery technology is further developed, we can anticipate much smaller devices. The development of aforementioned smartwear function will increase women's choices in occupations and general improvement in quality of life.

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.35.1-35.1
• /
• 2009

We have established a database of galaxy spectral line strengths for the SDSS database using an improved line measuring method. Our work includes the entire SDSS DR7 galaxies within redshift of 0.2. The absorption line strengths measured by the SDSS pipeline are seriously contaminated by emission filling. Our code, GANDALF (gas and absorption line fitting code) performs more accurate measurements by effectively separating emission lines from absorption lines. A significant improvement has also been made on the velocity dispersion measurement, more notably in late-type galaxies. We have also identified a number of broad line region galaxies which were misclassified as normal galaxies by the SDSS pipeline. We developed an effective method measuring their line strengths. The database will be provided with new parameters that are indicative of the line strength measurement quality. In addition, we made galaxy templates for the Hubble sequence. The database will be useful for many fields of galaxy studies including star formation and AGN activities.

• Safety and Health at Work
• /
• v.1 no.1
• /
• pp.11-18
• /
• 2010

In the UK, a person or organisation that creates risk is required to manage and control that risk so that it is reduced 'So Far As Is Reasonably Practicable (SFAIRP).' How the risk is managed is to be determined by those who create the risk. They have a duty to demonstrate that they have taken action to ensure all risk is reduced SFAIRP and must have documentary evidence, for example a risk assessment or safety case, to prove that they manage the risks their activities create. The UK Health and Safety Executive (HSE) does not tell organisations how to manage the risks they create but does inspect the quality of risk identification and management. This paper gives a brief overview of where responsibility for occupational health and safety lies in the UK, and how risk should be managed through risk assessment. The focus of the paper is three recent major UK incidents, all involving fatalities, and all of which were wholly avoidable if risks had been properly assessed and managed. The paper concludes with an analysis of the common failings of risk assessments and key actions for improvement.

• International Journal of Computer Science & Network Security
• /
• v.21 no.2
• /
• pp.221-228
• /
• 2021

Recent improvements on the quality, fidelity and availability of biometric data have led to effective human physical activity detection (HPAD) in real time which adds significant value to applications such as human behavior identification, healthcare monitoring, and user authentication. Current approaches usually use machine-learning techniques for human physical activity recognition based on the data collected from wearable accelerometer sensor from a single wearable smart device on the user. However, collecting data from a single wearable smart device may not provide the complete user activity data as it is usually attached to only single part of the user's body. In addition, in case of the absence of the single sensor, then no data can be collected. Hence, in this paper, a continuous HPAD will be presented to effectively perform user activity detection with mobile service infrastructure using multiple wearable smart devices, namely smartphone and smartwatch placed in various locations on user's body for more accurate HPAD. A case study on a comprehensive dataset of classified human physical activities with our HAPD approach shows substantial improvement in HPAD accuracy.

• Journal of radiological science and technology
• /
• v.22 no.1
• /
• pp.5-11
• /
• 1999

This paper reviews recent major activities on instrumentation and methodology of PET. The performance of the PET instrumentation can be expressed by four physical characteristics, 1) spatial resolution, 2) coincidence resolving time, 3) energy resolution, and 4) detection efficiency. The physical and technical aspects of PET systems are briefly discussed along with these characteristics. Toward high resolution PET the recent trend has been to design multiple rings of densely packed detector arrays with scintillators. In order to satisfy the sampling requirement in reconstruction, continuous detector units has been developed. Iterative image reconstruction algorithms have received considerable attention for improvement of both the sampling requirement and image quality toward the stationary PET. Better resolving time improves the maximum true coincidence rate, which is also increased with more detectors placed in coincidence with each other. It suggests that volume PET is promising for enhancement of detection efficiency. The scattered coincidence event rate may be reduced by using detectors with better energy resolution. The use of interplane septa, however, takes over improvement of energy resolution in 2D PET. Energy resolution becomes an important factor for image quality under the condition of septa removal such as volume PET. Toward full utilization of emitting photons, 3D reconstruction incorporating oblique rays has been studied, and volume reconstruction algorithms have been developed. Practical volume PET systems impose heavy burden not only to detector sets and coincidence circuits, but also to computers in the memory requirements and the data processing. In conclusion, there have been many ingenious methods in development of PET instrumentation, which are based on unique capability of PET. They will be expected to overcome technical limitations, and to approach the fundamental limits.

• Journal of the Korean Wood Science and Technology
• /
• v.10 no.3
• /
• pp.152-164
• /
• 1982

1. In order to make the improvement of plywood quality, this study has been made. The pretreatments applied to the veneers are as follows. a) The soaking treatment of the veneer in 30 percent methanol solution for 24 hours was applied to remove some resinous materials which may cause many stain discolouring on the face of finished plywood. b) The preservative treatment of the veneer in 2 percent malenit solution for 2 to 3 minutes was adopted to make resistance against decay and insect damages. c) The fire retardant treatment of the veneer in 40 percent ammonium phosphate solution for 2 hours was applied to give retardation effect against fire burning. 2. The results summarized in this study are as follows. a) One percent resinous materials was extracted, after the soaking of the veneers in 30 percent diluted methanol. b) No marks of the dirty stains of resinous materials on the face of the treated plywood was shown, although many quite dirty stains on the face of untreated plywood have contrary seen. c) However, the strip shear test strength of the treated plywood was not decreased. It means that there is no difference in the strength between the treated plywood and the untreated plywood. The strength values were 25.08 kg/$cm^2$ and 24.98 kg/$cm^2$, respectively. d) The strip shear test strength of plywood made of the treated veneers in 2 percent malenit solution was not decreased. e) The slight decrease of the strip shear test strength of the treated plywood made of the treated veneer in 40 percent ammonuim phosphate solution was shown. However, the remarkable difference of the fire retardation activities between the treated specimens and the untreated specimens has seen as in Table 10, that is, the fire proofed specimens had taken about 28 seconds to start to burn, while the untreated specimens had taken 15 seconds to reach to burning. This means that the fire retardation effect of the fire proofed plywood was greater than that of the unproofed plywood.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1894-1903
• /
• 2015

The purpose of this study was to examine the effects of group task-oriented circuit training (TOCT) based on motor learning applied in conjunction with physical and occupational therapy on functional activity, activities of daily living (ADLs), and quality of life in individuals with chronic stroke. Six chronic stroke patients participated for a duration of 31 weeks. Treatment outcomes were assessed via Chedoke-McMaster Stroke Assessment, the Berg Balance Scale, the Assessment of Motor and Process Skill (AMPS), and the Stroke Impact Scale pre- and post-intervention. The participants exhibited significant improvements in impairment, static and dynamic balance, and mood and emotion after group TOCT. The results of AMPS indicated an improvement in the motor area in 3 of the subjects. In the process area, 4 of the subjects exhibited improvement. The results of this study suggest that TOCT is beneficial to physical functions for chronic hemiparetic stroke patients in community-dwelling.

• Quality Improvement in Health Care
• /
• v.24 no.1
• /
• pp.9-22
• /
• 2018

Purpose: The purpose of this study is to develop the Korean root cause analysis (RCA) software that can be used to systematically investigate underlying causes for preventing or reducing recurrence of patient safety incidents. Methods: We reviewed the existing guidelines and literatures on the RCA in order to figure out the RCA process. Also we examined the existing RCA softwares for investigating patient safety incidents to design the contents and interface of the RCA software. Based on the results of reviewing literatures and softwares, we developed a draft version of the Korean RCA software that can be easily used in Korean hospital settings by RCA teams. Results: The Korean RCA software consisted of several modules, which are modules for identifying patient safety incidents, organizing RCA team, collecting and analysing data, determining contributory factors and root causes, developing the action plans, and guiding evaluation. Conclusion: The Korean RCA software included optimized RCA process and structured logic for cause analysis. Thus even beginners in RCA are expected to easily use this software for investigating patient safety incidents. As software has been developed with the public financial support, it will be distributed free of charge. We hope that it will contribute to facilitating patient safety improvement activities in Korea.

• Korean Journal of Food Science and Technology
• /
• v.20 no.3
• /
• pp.426-432
• /
• 1988

This study was undertaken to investigate for the possible use of enzymes with ${\alpha}-galactosidase$ and protease activities to remove flatulence factors as well as to improve the yield and protein digestibility in soymilk preparation. The volume and protein yield were not increased significantly by enzyme treatment. The solids yield increased by raising treatment pH 6 to 10, the temperature $30^{\circ}C\;to\;60^{\circ}C$ Enzyme treatment brought about a remarkable increase in TCA-soluble nitrogen compounds and a decrease in the contents of flatulence factors raffinose and stachyose.

• Journal of Distribution Science
• /
• v.14 no.4
• /
• pp.127-134
• /
• 2016

Purpose - Value chain in agriculture refers to direct and indirect activities related to value-added process from raw materials to final products in agricultural industries. In recent years, value chain analysis has become more important in the area of agricultural development. This article reviews the concept and importance of value chain analysis in the context of agricultural development and attempts to suggest improvement strategies. Research design, data, methodology - A literature survey was conducted for value chain analysis for agricultural development. The case of agro-value chain in Cambodia was deeply analyzed based upon interviews with government officers and related experts. Results - It seems that agro-value chain in developing countries are not well developed and does not carry out appropriate functions, compared to developed countries. Because value adding facilities, such as storage, processing and packing plants, milling plants, and etc. are not sufficiently constructed, the quality of agricultural products is low. Especially developing countries may loose opportunities to increase value of their product by exporting their agricultural products as raw materials to neighboring countries. Value adding process is also mainly controlled by traders in local markets or wholesale markets in urban areas. Farmers therefore can get lower share of final value of agricultural products compared to the shares paid to traders. Lastly it is argued that governments of developing countries do not play an active role in developing value chains and do not carry out coordinating functions in an effective and efficient manner. Conclusions - The first step to improve agro-value chain in developing countries is to identify and analyze value chain structure of agricultural products and to make development strategies and implementation programs. For improving value chain of agricultural products in developing countries, it is required to provide not only plans for constructing hardwares, such as wholesale markets, storage facilities, processing and packing plants, and etc., but also plans for improving softwares, such as measures for improving product quality and safety, setting up grade and standard, providing market information, and nurturing producer cooperatives.