• Journal of the Korean Applied Science and Technology
• /
• v.39 no.1
• /
• pp.52-62
• /
• 2022

The purpose of this study was to find a way to improve the stability and quality of urinalysis by checking the changes in the measurement values of representative clinical chemistry test items according to the repeated freezing and thawing before the urine test and the thawing process. All subjects were 10 healthy males, and the freeze and thaw stability test was performed using their urine samples. In the case of micro-albumin and amylase, there was no statistical significance at 37℃ with time, but at 42℃ and 60℃, there was a statistically significant change in the results with time. There were statistically significant changes in BUN, creatinine, uric acid, and glucose. As a result of long-term stability, after 7 days, glucose mutation increased and amylase decreased at 60℃. In the case of glucose and amylase, there was a statistically significant change in the results over time. To obtain accurate test results, accurate standardization of urinalysis including appropriate collection, storage, and storage methods of urine samples is required and systematic study of conditions for securing stability for each biomaterial is required.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.1
• /
• pp.39-48
• /
• 2022

Using environmental DNA (eDNA) in the fisheries and oceanography fields, research on the diversity of biological species, the presence or absence of specific species and quantitative evaluation of species has considerably been performed. Up to date, no study on eDNA has been tried in the area of fisheries acoustics in Korea. In this study, the biomass of a dominant species in the northwestern waters of Jeju Island was examined using 1) the catch ratio of the species from trawl survey results and 2) the ranking ratio of the species from the eDNA results. The dominant species was Zoarces gillii, and its trawl catch ratio was 68.2% and its eDNA ratio was 81.3%. The Zoarces gillii biomass from the two methods was 7199.4 tons (trawl) and 8584.6 tons (eDNA), respectively. The mean and standard deviation of the acoustic backscattering strength values (120 kHz) from the entire survey area were 135.5 and 157.7 m²/nm², respectively. The strongest echo signal occurred at latitude 34° and longitude 126°15' (northwest of Jeju Island). High echo signals were observed in a specific oceanographic feature (salinity range of 32-33 psu and the water temperature range of 19-20℃). This study was a pilot study on evaluating quantitatively aquatic resources by applying the eDNA technique into acoustic-trawl survey method. Points to be considered for high-quality quantitative estimation using the eDNA to fisheries acosutics were discussed.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.3
• /
• pp.127-137
• /
• 2022

Zirconia is fabricated through various processes. Each element in fabricating process can affect the physical properties of the definitive prosthesis. In particular, both the milling process and the sintering process can affect the final integrity of the zirconia prosthesis. Most of the milling machines adopt the ultra-precision 5-axis machining method, and the results vary depending on which milling method was used and how the milling equipment was managed. Milling blocks are selected according to cutting efficiency and aesthetic reproducibility. The sintering method can affect the grain growth and optical properties, and an accurate evaluation can be made only with additional research on the recent speed sintering procedure. Not only the sintering temperature but also the temperature holding time can affect the quality of definitive prosthesis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.139-147
• /
• 2022

In this study, we designed a high-strength, low-alkali type cement composite for artificial reef by mixing various binders and evaluated whether it is possible to manufacture it with an ME method 3D printer. As a result of the tests, it is found that it is important to control the water-binder ratio, the silica sand-binder ratio, and the type of silica sand in order to control the fluidity of the cement composites to enable 3D printing. The surface quality of 3D printer output can be achieved by adjusting the amount of viscosity agent added while obtaining printable fluidity. In the cement composites mixing proportion using the alpha-type hemihydrate gypsum, a setting control agent needs to be used to control the quick setting effect. It is also necessary to derive the time to maintain the fluidity, and to apply it when printing. To obtain the required strength, the mix proportion needs to be modified while satisfying the fluidity level of 3D-printable cement composites. In the present study, 3D-printable mix proportions were designed by the use of multi-component binders including alpha-type hemihydrate gypsum a for low-alkali type artificial reefs, and the printability was confirmed. A further study needs to be performed to quantitatively evaluate the alkali reduction effect.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.4
• /
• pp.15-31
• /
• 2022

The Green Purification Unit System (GPUS) is a green infrastructure facility applicable to the roadside to reduce particulate matter from road traffic. This study introduces two types of GPUS (type1 and type2) and assesses the performance and maintenance costs of each of them. The GPUS's performance analysis used the data collected in November 2021 after the installation of the GPUS type1 and type2 at the study site in Suwon. The changes in the particulate matter concentration near the GPUS were measured. The maintenance cost of GPUS type1 and type2 was assessed by calculating the initial installation cost and the management and repair cost after installation. The results of the performance analysis showed that the GPUS type1, which was manufactured by combining plants and electric dust collectors, had a superior particulate matter reduction performance. In particular, type1 produced a greater effect of particulate matter reduction in the time with a high concentration (50㎍/m³ or higher) of particulate matter due to the operation of electric dust collectors. GPUS type2, which was designed in the form of a plant wall without applying an electric dust collector, showed lower reduction performance than type1 but showed sufficiently improved performance compared to the existing band green area. Meanwhile, the GPUS type1 had three times higher costs for the initial installation than GPUS type2. In terms of costs for managing and repairing, it was evaluated that type1 would be slightly more costly than type2. Finally, this study discussed the applicability of two types of GPUS based on the result of the analysis of their particulate matter performance and maintenance cost at the same time. Since GPUS type2 has a cheaper cost than type1, it could be more economical. However, in the area suffering a high concentration of particulate matter, GPUS type1 would be more effective than type2. Therefore, the choice of GPUS types should rely on the status of particulate matter concentration in the area where GPUS is being installed.

• Journal of Korean Society of Disaster and Security
• /
• v.15 no.3
• /
• pp.67-77
• /
• 2022

In South Korea, U-type girder development was attempted as a means to increase the length of I-type girder, but due to the large self-weight according to the post-tension method, the application of rail bridges of 30m or less is typical. There are not many examples of application of pre-tension type girder. This study does not limit the post-tension method, but applies the pre-tension method to induce a reduction in self-weight and materials used due to the reduction of the cross-section. In addition, we intend to apply the on-site pre-tensioning method using the internal reaction arm of the U-type girder. The prestressed concrete U-type girder bridge is composed of a concrete deck slab and a composite section. Compared to the PSC I-type, which is an open cross-section because the cross section is closed, structural performance such as resistance and rigidity is improved, the safety of construction is increased during the manufacturing and erection stage, and the height ratio is reduced due to the reduction of its own weight. Therefore, it is possible to secure the aesthetic scenery and economical of the bridge. As a result, it is expected that efficient construction will be possible with high-quality factory-manufactured members and cast-in-place members. In this paper, the introduction of the pre-tension method on-site and the analytical performance verification of the anchoring block for tension are included.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.5
• /
• pp.103-116
• /
• 2022

The South Korean Ministry of Land, Infrastructure, and Transport designated seven automated driving test beds required to evaluate vehicle performance every year for the expansion of mobility services based on automated driving. As a fundamental study, we suggested a necessary example of evaluating the performance with a satisfaction survey for the services before the evaluation. First, we surveyed the perception of automated driving services of users and the public in Sejong-si, South Korea. The survey showed that the users had a higher level of awareness of automated driving technology and intention to use it than the public. Second, the satisfaction survey was conducted on demand-responsive public transportation and automated driving service users. Notably, using the Wilcoxon Rank Sum Test, among the non-parametric statistical analysis methods, we found that safety-related factors affected the overall satisfaction of users of automated driving services. On the other hand, in the case of the demand-responsive public transportation service users, factors related to service convenience affected overall satisfaction. Hence, the results of these surveys are expected to be used as basic data and guidelines to improve the quality of automated driving services and policy establishment.

• Tunnel and Underground Space
• /
• v.32 no.5
• /
• pp.312-326
• /
• 2022

The generalized Hoek-Brown (GHB) criterion, which is recognized as one of the standard failure conditions for rock mass, is specialized for rock engineering applications and covers a wide range of rock mass conditions. Accordingly, many research efforts have been devoted to the incorporation of this criterion into the stability analysis of rock structures. In this study, the slip-line analysis method, which is a kind of elastoplastic analysis method, is combined with the GHB failure criterion to derive analytical equations that can easily calculate the plastic radius and stress distribution in the vicinity of the circular tunnel. In the process of derivation of related formulas, it is assumed that the behavior of rock mass after failure is perfectly plastic and the in-situ stress condition is hydrostatic. In the formulation, it is revealed that the plastic radius can be calculated analytically using the two respective tangential friction angles corresponding to the stress conditions at tunnel wall and elastic-plastic boundary. It is also shown that the plastic radius and stress distribution calculated using the derived analytical equations coincide with the results of Lee & Pietruszczak's numerical method published in 2008. In the latter part of this paper, the influence of the quality of the rock mass on the size of the plastic zone, the stress distribution, and the change of the tangential friction angle was investigated using the derived analytical equations.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.1
• /
• pp.22-30
• /
• 2023

Currently, almost all product development in the jewelry industry utilizes 3D CAD and 3D printing. In this situation, 3D CAD modeling and 3D printing ability units in colleges, Tomorrow Learning Card Education, and Course Evaluation-type jewelry design related education are conducted with developed curriculum based on the standards for training standards, training hours, training equipment, and practice materials presented by NCS. Accordingly, this study analyzes 3D CAD modeling and 3D printing training facilities, training hours, training equipment, etc into three categories of NCS precious metal processing and jewelry design, and studies the development of educational systems such as 3D CAD/3D printing curriculum and various environments that meet these standards. Education using this 3D CAD/3D printing education system will enable us to continuously supply professional talent with practical skills not only in the jewelry industry but also in the entire 3D CAD/3D printing manufacturing industry, which is called as one of the pillars of the 4th Industry. The quality of employment of trainees receiving education and the long-term retention rate after employed can also have a positive effect. In addition, excellent educational performance will help improve the recruitment rate of new students in jewelry jobs or manufacturing-related departments, which are difficult to recruit new students in recent years.

• The Journal of Korean Academy of Sensory Integration
• /
• v.20 no.3
• /
• pp.60-71
• /
• 2022

Objective : This study aimed to summarize and present the effects of group sensory integration treatment applied to children with and without disabilities in Korea. Methods : The search period was from January 2010 to December 2021, and databases of 'The Journal of Korean Academy of Sensory Integration', 'The Korean Journal of Occupational Therapy', 'Koreanstudies Information Service System', 'Research Information Sharing Service', 'DBpia' were used for data search. A total of 11 studies were selected, and the Patient, Intervention, Comparison, Outcome method was applied to organize them systematically. Results : As a result of the study, single-group non-randomized studies were the most common with 8 out of 11 studies (72.73%). There were 99 subjects, ranging in age from 3 to 11, and an average of 7.39. Among them, there were more children with disabilities, and 40 out of 99 (40.41%) were diagnosed with developmental disabilities the most. A total of 5 to 45 treatment intervention sessions were provided, and 60 minutes were the most frequently provided once or twice a week. The Canadian Occupational Performance Measure and The Penn Interactive Peer Play Scale were the most commonly used evaluation tools in 4 times each (12.90%). As the treatment intervention goal, social interaction skills was the most common with 8 studies (36.36%). As a result of treatment intervention, 8 studies showed significant results. Conclusion : Based on this study, it is expected that in the future, various methods of intervention of sensory integration therapy based on high quality levels can be systematically presented and used as useful information in clinical practice.