• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1441-1461
• /
• 2017

Nowadays, Dynamic Adaptive Streaming over HTTP (DASH) has become very popular in streaming multimedia contents. In DASH, a client estimates current network bandwidth and then determines an appropriate video quality with bitrate matching the estimated bandwidth. Thus, estimating accurately the available bandwidth is a significant premise in the quality of video streaming, especially when network traffic fluctuates substantially. To cope with this challenge, researchers have presented various filters to estimate network bandwidth adaptively. However, experiment results show that current schemes either adapt slowly to network changes or adapt fast but are very sensitive to delay jitter and produce sharply changed estimation. This paper presents a novel bandwidth estimation scheme based on Moving Average Convergence Divergence (MACD). We applied an MACD indicator and its two thresholds to classifying network states into stable state and agile state, based on the network state different filters are applied to estimate network bandwidth. In the paper, we studied the performance of various MACD indicators and the threshold values on bandwidth estimation. Then we used a DASH proxy-based environment to compare the performance of the presented scheme with current well-known schemes. The simulation results illustrate that the MACD-based bandwidth estimation scheme performs superior to existing schemes both in the speed of adaptively to network changes and in stability in bandwidth estimation.

• Journal of Wetlands Research
• /
• v.10 no.1
• /
• pp.11-20
• /
• 2008

In this study the estimation method for stream hydraulic characteristics which is served as the input data set for running QualKo water quality model is investigated. The conventional approach for estimating such hydraulic parameters is to use the data set from the last cross section in each reach. However, it is shown that in order to represent correctly flow velocity profiles or the travel time in streams, hydraulic parameters of QualKo model should be estimated with all cross section data set within the corresponding reach. In addition, the unsuitable estimation of hydraulic parameters at some reaches has influence on the water quality predictions at the corresponding reaches, and the errors of water quality predictions are propagated toward the downstream without any error attenuation.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.2
• /
• pp.97-103
• /
• 1997

DO concentration in the aquatic system is important for the water quality management perspective. Water quality model uses available reaeration coefficient (K2) estimation equations in calculating DO, however, they might include inevitable uncertainty that the model output can be less reliable. In this study, the calibrated QUAL2E model for the Passaic River in New Jersey, U.S., was used to examine the effect of K2 estimation equation on the output DO concentration of the river. The model was run with six commonly used equations separately with all the other conditions remained same. The result showed that the output DO concentration profiles varied widely with different equations, and maximum difference was 4.96 mg/L for the same location which is unacceptably large. It implies that the development of reliable equation is required for proper water quality management. The unreliable model output can lead to a wrong decision in water quality management such as unnecessarily high or too low treatment of wastewater, which will cause serious effect on the community economically and socially in either case. Generating more reliable model output with slight investment to develop a site specific K$_2$ equation can improve the decision making process significantly and is highly recommended.

• Journal of Korea Water Resources Association
• /
• v.37 no.12
• /
• pp.1009-1018
• /
• 2004

A systematic method using an optimal estimation algorithm is presented for simultaneous estimation of diffuse pollution distributed along a stream reach and model parameters for a stream water quality model. It was applied with the QVAL2E model to the South Han River for optimal estimation of kinetic constants and diffuse loads along the river. Initial calibration results for kinetic constants selected from a sensitivity analysis reveal that diffuse source inputs for nitrogen and phosphorus are essential to satisfy the system mass balance. Diffuse loads for total nitrogen and total phosphorus were estimated solving the expanded inverse problem. Comparison of kinetic constants estimated simultaneously with diffuse sources to those estimated without diffuse loads, suggests that diffuse sources must be included in the optimization not only for its own estimation but also for adequate estimation of the model parameters. Application of optimization method to river water quality modeling is discussed in terms of the sensitivity coefficient matrix structure.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.57-60
• /
• 2000

This paper presents a new adaptive fast motion estimation algorithm along with its architecture. The conventional algorithm such as full - search algorithm, three step algorithm have some disadvantages which are related to the amount of computation, the quality of image and the implementation of hardware, the proposed algorithm uses spatial correlation and a slope of motion vector in order to reduce the amount of computation and preserve good image quality, The proposed algorithm is better than the conventional Block Matching Algorithm(BMA) with regard to the amount of computation and image quality. Also, we propose an efficient at chitecture to implement the proposed algorithm. It is suitable for real time processing application.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.707-711
• /
• 2004

Recently, the interests about noises have increased with the rapid development of our living environment Until now the estimation methods to sounds have used the equivalent levels. The sensitivities of human beings aren't considered in these methods. It's a situation to need new estimation methods for environmental noises. They must be analyzed by the characteristics of sounds before making the noise regulations newly. In this study, the noises were measured around our living environment And the frequency analysis, Sound Quality Metrics, the cluster analysis and so on are used to classify the environmental noises.

• Journal of Web Engineering
• /
• v.20 no.8
• /
• pp.2413-2432
• /
• 2021

Recently, the demand for high-quality video content has rapidly been increasing, led by the development of network technology and the growth in video streaming platforms. In particular, displays with a high refresh rate, such as 120 Hz, have become popular. However, the visual quality is only enhanced if the video stream is produced at the same high frame rate. For the high quality, conventional videos with a low frame rate should be converted into a high frame rate in real time. This paper introduces a bidirectional intermediate flow estimation method for real-time video frame interpolation. A bidirectional intermediate optical flow is directly estimated to predict an accurate intermediate frame. For real-time processing, multiple frames are interpolated with a single intermediate optical flow and parts of the network are implemented in 16-bit floating-point precision. Perceptual loss is also applied to improve the cognitive performance of the interpolated frames. The experimental results showed a high prediction accuracy of 35.54 dB on the Vimeo90K triplet benchmark dataset. The interpolation speed of 84 fps was achieved for 480p resolution.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.6
• /
• pp.728-737
• /
• 2005

Water quality of the Hwanggujicheon is poor because of the rapid housing and development in the large area of the basin. Establishment of water quality management strategy, based on the pollution sources survey and pollutant loads estimation, has to be established for the preservation of the stream water quality of the region. In this study, waste load allocation model to achieve the water quality goal of the stream and the optimization of pollutant load reduction, was developed. Nonpoint pollutant loads calculated by runoff model in the previous study are utilized for pollutant loads estimation of the drainage areas in this study. From the application result of the allocation model, water quality goals of the Hwanggujicheon that can be achieved as a matter of fact are BOD 8 mg/L. To achieve these goals, 23% of effluent BOD loads have to be reduced in the basin.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1B
• /
• pp.68-77
• /
• 2010

Wireless sensor networks are installed in various environments and collect sensing data through wireless links. The quality of a wireless link may be unstable due to environment causes and hardware performance in wireless sensor networks. Since the change of the link quality may cause data loss, sensor nodes need to adaptively estimate the change of the link quality. Also, the routing protocol should deal with this situation. In this paper, the adaptive link quality estimation and routing scheme in the large-scale wireless sensor networks are proposed. When the quality of a link is unstable, sensor nodes agilely estimate the quality of links, and the new route is selected. When quality of a link is stable, the link quality is occasionally estimated so that the energy consumption is reduced. Moreover, sensor nodes exchange less beacons in order to reduce an overhead in dense networks. In the case of sparse network, the sensor nodes exchange more beacons for finding a better route. We prove that the proposed scheme can improve the energy efficiency and reliability.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.5
• /
• pp.556-560
• /
• 2010

In the wireless sensor networks using a multi-hop, quality variation of links occurs irregularly due to the hardware restriction and environmental factor. If an appropriate route, which is affected by the quality variation, is not selected. Traditionally, a beacon is periodically broadcasted and the link quality is estimated. However, the periodically beacon based scheme cannot efficiently estimate the quality of the link changing irregularly. In this paper, a scheme to estimate the link quality adaptively according to network state is proposed. When the link quality changes, the scheme adapts to a change agilely and packet losses are reduced. When there is no change of the link quality, the link quality is estimated in the long period and the energy consumption is reduced. Through performance evaluations, we prove that our adaptive link estimation scheme improves the energy efficiency and packet reception ratio than the periodic estimation scheme.