• Journal of fish pathology
• /
• v.27 no.1
• /
• pp.57-65
• /
• 2014

Copper ($CuSO_4$) has been widely used to control algae and pathogens in fish culture ponds. However, its toxic effects on fish depend not only on its concentration in water but also on water quality. The susceptibility of the rockfish, Sebastes schlegeli to copper was evaluated at three water-temperatures (WT; 18, 23 and $28^{\circ}C$) for 4 days. After the exposure of two copper concentrations (100 and $200{\mu}g/L$), a hematological effect was exerted on rockfish, by causing changes in red blood cell count and hematocrit value at $28^{\circ}C$. Total protein levels of the fish showed a tendency of co-increase with glucose depend on the WT, after copper exposure. However, the plasma calcium and magnesium levels were significantly increased at $200{\mu}g/L$ copper, regardless of the WT. Enzymes activities including ALT and LDH in serum were also significantly increased depend upon the copper treatment only. This indicates that inorganic components and enzymes activities were sensitive indexes to stress by toxicant such as copper. The cortisol levels were significantly elevated by both WT rising and copper treatment in serum of rock fish. In conclusion, these changes can be seen as an initial response to temperature stress and as a sustaining response to copper exposure. The present findings suggest that a simultaneous stress by temperature change and copper exposure could accelerate an alteration of hematological and plasma biological parameters in the rockfish.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.10
• /
• pp.1428-1432
• /
• 2002

Thirty-six (20 wethers and 16 rams) adult Gansu highland finewool sheep with an average liveweight of $19.42{\pm}1.83kg$ were used. The sheep were allocated to 4 treatments and confined in individual feeding stalls. The 80 day feeding trial was divided into 2 periods of 38 and 42 days. The sheep had access to clean water and were fed chopped wheat straw ad libitum. Daily supplemented diets of 150 g for the first period and 200 g for the later period were provided. The 4 types of supplements were: Wheat bran type (I), which is the traditional feeding practice in the area and the control group; Linseed cake type (II); Linseed cake+poultry litter type (III); Poultry litter+distiller grains type (IV). The digestibility trial was conducted using a total collection method at the end of the first period in the feeding trial. The results showed that the digestibilities of DM, OM, CP, CF, NDF and ADF in group II and III were increased to more than 50%. CP and NDF digestibility in group II were significantly increased by 23.6% and 25.5% respectively over group I (p<0.01) and by 10.1% and 13.1% respectively over group III (p<0.05). The digestibility of DM, OM, CP, CF, NDF and ADF in group IV was lower than group I by 4.4 to 8.4% (p>0.05). Compared to group I, group II and III increased straw intake by 17.6% (p<0.01) and 10.8% (p<0.05). The ADG increased from 16.2 g in group I to 45.3 g and 32.8 g (p<0.01) in group II and III respectively. The ratio of supplement intake to gain decreased from 10.7 in group I to 3.9 and 5.4 (p<0.01) in group II and III respectively. The ratio of supplement cost to gain also decreased by 60.0% and 64.3%, respectively. The wool growth rate and wool strength in these 2 groups were noticeably improved. This significantly enhanced the wool's textile value. The above parameters in group IV were lower than in group I, except the ratio of supplement cost to gain. This research indicates that local low quality nitrogen resources could be used effectively and economically to improve the utilization of wheat straw fed to sheep on smallholder farms under harsh loess plateau conditions in the winter.

• Korean Journal of Food Science and Technology
• /
• v.52 no.1
• /
• pp.26-30
• /
• 2020

This study was undertaken to determine the characteristics of xanthoangelol, the major chalcone constituent derived from the extracts of different parts of Lespedeza bicolor. Xanthoangelol was isolated from the root extract using column chromatography and used as a standard for quantitative analysis. The structure of the isolated compound was established based on spectroscopic evidence. The HPLC-DAD method was validated for specificity, linearity, precision, accuracy, limit of detection, and limit of quantitation. The calibration curve of xanthoangelol had significant linearity (R²>0.9999). Limit of detection and limit of quantitation 0.018 and 0.059 ㎍/mL, respectively. The relative standard deviation values of precision test, and intra- and inter-day tests were less than 0.22 and 0.40%, respectively. In the recovery test, the accuracy ranged from 98.98-102.78% with RSD values less than 0.13%. The method validation parameters indicate the applicability of the HPLC method for quality control of food or drug formulations containing L. bicolor.

• Proceedings of the Korean Society for Bioinformatics Conference
• /
• 2000.11a
• /
• pp.21-22
• /
• 2000

Expressed sequence tags (EFTs) are the partial segments of cDNA produced from 5 or 3 single-pass sequencing of cDNA clones, error-prone and generated in highly redundant sets. Advancement and expansion of Genomics made biologists to generate huge amount of ESTs from variety of organisms-human, microorganisms as well as plants, and the cumulated number of ESTs is over 5.3 million, As the EST data being accumulate more rapidly, it becomes bigger that the needs of the EST analysis tools for extraction of biological meaning from EST data. Among the several needs of EST analyses, the extraction of protein sequence or functional motifs from ESTs are important for the identification of their function in vivo. To accomplish that purpose the precise and accurate identification of the region where the coding sequences (CDSs) is a crucial problem to solve primarily, and it will be helpful to extract and detect of genuine CD5s and protein motifs from EST collections. Although several public tools are available for EST analysis, there is not any one to accomplish the object. Furthermore, they are not targeted to the plant ESTs but human or microorganism. Thus, to correspond the urgent needs of collaborators deals with plant ESTs and to establish the analysis system to be used as general-purpose public software we constructed the pipelined-EST analysis system by integration of public software components. The software we used are as follows - Phred/Cross-match for the quality control and vector screening, NCBI Blast for the similarity searching, ICATools for the EST clustering, Phrap for EST contig assembly, and BLOCKS/Prosite for protein motif searching. The sample data set used for the construction and verification of this system was 1,386 ESTs from human intrathymic T-cells that verified using UniGene and Nr database of NCBI. The approach for the extraction of CDSs from sample data set was carried out by comparison between sample data and protein sequences/motif database, determining matched protein sequences/motifs that agree with our defined parameters, and extracting the regions that shows similarities. In recent future, in addition to these components, it is supposed to be also integrated into our system and served that the software for the peptide mass spectrometry fingerprint analysis, one of the proteomics fields. This pipelined-EST analysis system will extend our knowledge on the plant ESTs and proteins by identification of unknown-genes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.62-68
• /
• 2016

The feeder cable assembly is an automotive part used for telecommunication. If it malfunctions, the control and safety of the automobile can be put at risk. ALT (Accelerated Life Testing) is a testing process for products in which they are subjected to conditions (stress, strain, temperatures, etc.) in excess of their normal service parameters in an attempt to uncover faults and potential modes of failure in a short amount of time. Failure is caused by defects in the design, process, quality, or application of the part, and these defects are the underlying causes of failure or which initiate a process leading to failure. Thermal shock occurs when a thermal gradient causes different parts of an object to expand by different amounts. Thermal shock testing is performed to determine the ability of parts and components to withstand sudden changes in temperature. In this research, the main causes of failure of the feeder cable assembly were snapping, shorting and electro-pressure resistance failure. Using the Coffin-Manson model for ALT, the normal conditions were from Tmax = $80^{\circ}C$ to Tmin = $-40^{\circ}C$, the accelerated testing conditions were from Tmax = $120^{\circ}C$ to Tmin = $-60^{\circ}C$, the AF (Acceleration Factor) was 2.25 and the testing time was reduced from 1,000 cycles to 444 cycles. Using the Bxlife test, the number of samples was 5, the required life was B0.04%.10years, in the acceleration condition, 747 cycles were obtained. After the thermal shock test under different conditions, the feeder cable assembly was examined by a network analyzer and compared with the Weibull distribution modulus parameter. The results obtained showed good results in acceleration life test mode. For the same reliability rate, the testing time was decreased by a quarter using ALT.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.2
• /
• pp.145-149
• /
• 2006

This study investigated the quality characteristics of meat from goat fed fermented grape feeds including chemical composition, physical and sensory properties. The hardness of the goat meat was decreased by feeding fermented grape diets, but no significant difference in the pH was observed between control group and fermented grape diet-fed group. Major minerals in goat meat were shown to be Ca, Na, K and Mg and total amino acid content was the highest in a group fed $20\%$ fermented grape-containing diet (T2) among experimental groups. Major fatty acids in goat meat were linoleic acid, oleic acid, palmitic acid, and stearic acid while the content of oleic acid in meat was significantly increased in the group fed fermented grape diet. By increasing the amount of fermented grape in goat diet, L (lightness), a (redness) and b (yellowness) color parameters of goat meat were increased. From the sensory test, the meat from goat fed $30\%$ fermented grape-containing diet (T3) was evaluated the best, with higher overall acceptability of meat at higher content of fermented grape in goat feeds.

• Korean Journal of Organic Agriculture
• /
• v.20 no.2
• /
• pp.221-230
• /
• 2012

Rumen fermentative characteristic is useful indicators of the quality of ruminant feed stuffs and diets. An in vitro rumen fermentation experiment was therefore carried out to compare fermentation patterns among three forage sources. These were whole crop barley (WCBS), Italian ryegrass silage (IRGS) and rice straw silages (RSS). Rice straw (RS) was the control, making the treatments 4 in total. Forages were randomly allocated to serum bottles. The incubation times were arranged 0, 3, 6, 9, 12, 24, 48 and 72h at $39^{\circ}C$, respectively. Each forage source was replicated 3 times per incubation time. At each sampling time, total gas and pH were measured, whilst individual volatile fatty acids (VFAs), total volatile fatty acids (TVFAs) and ammonia nitrogen ($NH_3$-N) were determined later after storing samples at $-20^{\circ}C$. Acetate: Propionate ratio (A/P) was then calculated. Forage source had a significant effect (P<0.001) on pH and $NH_3$-N. RSS maintained higher pH values than the rest of the forage sources. A decreasing pH trend with increased time of incubation, in agreement with literature, was observed for all forage sources. WCBS recorded $NH_3$-N values higher than all the other treatments. Total gas, individual and total VFA and A/P ratio were not affected by forage source. However, there was a significant difference in all parameters (p<0.05) among forage sources at sampling periods at 3 to 72h. Therefore, the present results indicating that WCBS, IRGS, RS and RSS maintained in vitro rumen pH above the critical value. Also, WCBS produced the highest NH3-N and on this merit could be of better nutritive value, in vivo, in the ruminant.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.15 no.4
• /
• pp.273-281
• /
• 2013

Based on the results of continuous flux measurements at the Gimje paddy flux site in the southwestern coast of Korea, carbon dioxide and energy exchanges between customarily cultivated rice-barley double cropping paddy field and the atmosphere during the 2012 rice growing season (from $9^{th}$ Jun. 2012 through $20^{th}$ Oct. 2012) were analyzed. Carbon dioxide and energy (H, LE) fluxes were estimated by the eddy covariance method. Environmental parameters (net radiation, precipitation, etc.) and plant biomass (LAI, plant height, etc.) were measured along with fluxes. After the quality control and gap-filling, the observed fluxes were analyzed. The results have been showed that net ecosystem exchange (NEE), gross primary production (GPP), and ecosystem respiration (Re) during the rice cropping period were -277.1, 710.3, and 433.2 g C $m^{-2}$, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.2
• /
• pp.493-499
• /
• 2008

This study was performed to estimate the water quality parameters on corrosion such as pH, turbidity, Fe released concentration, corrosion rate by using batch reactor for corrosion control of phosphate corrosion inhibitor in carbon steel pipes. The pH, conductivity, alkalinity, and Ca hardness showed a slight change for dosing the phosphate corrosion inhibitor with carbon steel pipe in batch reactor. The turbidity was about ten times lower with 5 mg $P_2O_5/L$ of the corrosion inhibitor than that without. The Fe released concentration and corrosion rate was decreased by about 12.2, 24 times with 5 mg $P_2O_5/L$ of the corrosion inhibitor than that without. In conclusion, the optimum concentration of the phosphate corrosion inhibitor was found to be 5 mg $P_2O_5/L$. The effect of the corrosion inhibitor was significant for the carbon steel plate samples tested in this study. The corrosion inhibitor can be an effective cure for corrosion and red water problem preventing the service pipe from further corrosion.

• Analytical Science and Technology
• /
• v.28 no.1
• /
• pp.33-39
• /
• 2015

CdS-QD particles are a nano-sized semiconducting crystal that emits light. Their optical properties show great potential in many areas of applications such as disease-diagnostic reagents, optical technologies, media industries and solar cells. The wavelength of emitting light depends on the particle size and thus the quality control of CdS-QD particle requires accurate determination of the size distribution. In this study, CdS-QD particles were synthesized by a simple ${\gamma}$-ray irradiation method. As a particle stabilizer polyvinyl pyrrolidone (PVP) were added. In order to determine the size and size distribution of the CdS-QD particles, sedimentation field-flow fractionation (SdFFF) was employed. Effects of carious parameters including the the flow rate, external field strength, and field programming conditions were investigated to optimize SdFFF for analysis of CdS-QD particles. The Transmission electron microscopy (TEM) analysis show the primary single particle size was ~4 nm, TEM images indicate that the primarty particles were aggregated to form secondary particles having the mean size of about 159 nm. As the concentration of the stabilizer increases, the particle size tends to decrease. Mean size determined by SdFFF, TEM, and dynamic light scattering (DLS) were 126, 159, and 152 nm, respectively. Results showed SdFFF may become a useful tool for determination of the size and its distribution of various types of inorganic particles.