• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.10a
• /
• pp.89-94
• /
• 1997

As the reinforced concrete structures are aged, repair and rehabilitation materials and techniques have ben developed. However, most of the repair materials and methods are imported from abroad and theoretical study and repairing techniques are also not well established yet. A specification for quality of repair materials should be established, in order to secure the stability and to improve the serviceability of the repaired structures. In this study, long term properties of repair materials such as thermal expansion coefficient, hardening shrinkage, creep, and chemical resistance have been tested. The material properties shows to be affected many actors such as curing period, temperatures, relative humidity, and etc. The repair material should be selected by considering the cause and shape of the defects, mix properties, workability, quality control of construction, and etc.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.12 no.3
• /
• pp.33-39
• /
• 1992

This paper presents a summary of the immersion ultrasonic test to analyze the quality of diffusion bonding parts. The most important property of diffusion bonding parts is bonding strength, and that can be obtained by shear test. By comparing among data obtained by ultrasonic test(C-Scan) and those by shear test (bonding strength), these data are shown to be in good relation. Therefore ultrasonic C-Scan test result can be used successfully in quantitative quality control for diffusion bonded parts.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.40-41
• /
• 2020

This study has resulted in the following findings. First, Using more than 30% of GBFS to replace FA enabled bleeding control through improved fluidity. Moreover, it has been confirmed that effective strength and proper quality can be achieved when it was applied as a backfilling material with higher early strength than the base material. Second, When using more than 30% of FNS to replace sand, it was found that adding 0.3~0.35 of the AE agent is effective for bleeding control through improved fluidity. Third, When using more than 30% of both GBFS and FNS in combination, it was found that adding 0.3~0.35 of the AE agent is effective for bleeding control through improved fluidity. Also, it was confirmed that proper mixing of 15~60% of GF secured the effective strength and desired quality as a refiller and joint filler material.

• Korean Institute of Interior Design Journal
• /
• v.16 no.2 s.61
• /
• pp.303-313
• /
• 2007

Nowadays, according to many studies, indoor space's pollution level is two to ten times higher than outdoor space's. This result arouses our attention. The major causes of deterioration of indoor air quality are the lack of ventilation caused by draught-proofing and insulation construction, and harmful chemical substances emitted from building materials, office machine and furniture. Therefore, we are continuing research to find the method for healthful house and production of many forms of well-being goods. However, because of exaggerated advertisements and the lack of accurate information, consumers choose the products whose performance is not verified. Therefore, this study investigates the actual conditions of pollution by building materials and the extent of the health damage by this pollution, and suggests the method for minimizing indoor pollution in aspect of indoor environment control and the use of environment friendly materials. But the building materials presented in this study are limited to the environment friendly construction materials that are in circulation In domestic market because this research is primarily aimed to give domestic consumers the standard for selecting this materials.

• Journal of the Korean Society of Safety
• /
• v.27 no.1
• /
• pp.63-69
• /
• 2012

Ready-mixed concrete(RMC) has been a major construction materials for infrastructures. However, RMC with poor quality is reported to be social issue since it directly user's safety and convenience. Because the properties of concrete as a construction material are greatly influenced by the variation of water content, to control water accurately is the most efficient method for the quality control in RMC industry. In this study, the automatic measurement technology of fine aggregate was developed by using the microwave moisture measurement. For the various conditions of fine aggregate such as moisture, temperature and pressure, the calibration curve of moisture measurement was obtained by using oven-dry method. From the infield and outfield test, it can be obtained that the accuracy of microwave moisture measurement is very high and the automatic system of microwave moisture measurement is very convenient and useful for quality control in RMC Industry.

• Particle and aerosol research
• /
• v.13 no.1
• /
• pp.11-16
• /
• 2017

Indoor air quality is of increasing concern because it is closely related human health. An air handling unit (AHU) can be used to control the indoor air quality related to particulate matters and $CO_2$ as well as air conditioning such as temperature and humidity of indoor air. An electrostatic precipitator has a high collection efficiency and low pressure drop, however, ozone can possibly generate from its chargers, which is one of drawbacks to apply it for indoor air control. Here we compared four charging electrodes such as a $50{\mu}m$ tungsten wire, a $100{\mu}m$ tungsten wire, a $16{\mu}m$-thickness Al foil and a carbon fabric comprised of $5-10{\mu}m$ fibers. The carbon fabric electrode showed a superior particle collection efficiency and a lower ozone generation at a given power consumption compared to tungsten wires of 50, $100{\mu}m$ and an Al foil electrode. This low ozone generating, micro-sized electrode can be applied to the electrostatic precipitator in AHU for indoor air control.

• Journal of Korean Society for Quality Management
• /
• v.20 no.1
• /
• pp.147-157
• /
• 1992

This article describes a prototype expert system for yarn spinning process planning in textile industry. This expert system is intended as a consultant to give the technicians interactive assistance for the appropriate process planning in accordance with used materials, required count, and other factors affected yarn spinning by means of many types of machine. Also, this system has the other function that can be compared the standard values with the measured ones for quality characteristics control. VP-EXPERT-a rule-based microcomputer expert system development tool-provides the expert system components for this development. The details of knowledge organization, rule representation, inference reasoning process, and performance of this expert system are demonstrated with the practical yarn spinning operations.

• Journal of Society of Preventive Korean Medicine
• /
• v.4 no.2
• /
• pp.193-204
• /
• 2000

In this study, advanced model for quality control of oriental medicine and methods for practice was suggested through literature inspection, analysis of foreign system such as China and Japan, survey analysis on the current system, quality analysis of randomly selected oriental medicine samples, and intensive discussions among oriental medicine specialists 1. The quality of oriental medicine should be consistently controlled by Ministry of Health and Welfare form its cultivation or import to its circulation process to final consumer 2. All oriental medicines should be circulated as standardized goods which should be marked by lot numbers. The packing material and Packing size should be liberalized. The qualify should be differentialized though free competition among makers. 3. Realistic standards for pesticide, heavy metal and decolorant should be established though long-term monitoring process according to each oriental medicine's origin, therapeutic part, cultivation area, harvesting time, and cultivation method. 4. Ministry of Health and Welfare should educate oriental medicine's quality control personnel regularly or on demand, and establish specialist pool. Ministry of Health and Welfare should also establish oriental medicine information system to provide informations about quality of domestic or foreign oriental medicinal raw materials. 5. The government should provide information about foreign of oriental medicine market to importers. Quality of imported oriental medicine should be inspected before its customs clearance, and all imported oriental medicine should be circulated by standardized oriental medicine makers. 6. Oriental medicine's pharmacopoeia should be Published to provide quality standard of oriental medicine and improve it.

• Korean Journal of Agricultural Science
• /
• v.46 no.1
• /
• pp.93-102
• /
• 2019

The materials of artificial soils in the production process of container seedlings have a great influence on plant growth. Peat moss, vermiculite, and perlite have been used as major components of artificial soils for many years; however, they could decrease carbon fixation carried out by the soil and cause environmental problems such as a change in the water quality. Thus, environmental friendly materials to replace them must be developed. The purpose of this study was to verify the optimum additive materials of artificial soils and their mixed ratios for the growth and seedling quality index (SQI) of Quercus serrata. Rice husk, mushroom sawdust, and pine bark were each used as an additive material and mixed into the growth medium at 10% and 20% of the total volume. There was no significant difference in the height growth of Q. serrata. The 20% mushroom sawdust decreased the root collar diameter by 23.4% compared to the control. The total dry weight was highest with the 10% rice husk and was significantly lower by 10.3% for the 20% mushroom sawdust compared to the control. Additionally, the SQI for all the treatments showed no tendency to increase compared with the control. Thus, this study showed the possibility of recycling biomaterials from agriculture and forest for seedling production. This method could reduce environmental problems and help eco-friendly nurseries to achieve a carbon negative impact by the recycling of by-products.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.2
• /
• pp.138-145
• /
• 2010

Curcuma longa L. (turmeric) is an important medicinal plant that has been historically used in herbal medicine and in the health food throughout Asia etc. Recently, the demands on rhizome of turmeric are increasing greatly by well-being boom, but there is not enough to meet the demands. To fulfill increasing demands, cultivation system strategies using the organic fertilizers are required to produce a greater amount of rhizome with good quality and yield. A field experiment was conducted to determine the effect of composts, NPK fertilizer(control, F), NPK + swine manure(SM) and NPK + fermentation manure from the wasted oriental medicine materials(OMWM), on rhizome yield and the content of bioactive components for quality. Our results showed that two compost applications can increase both rhizomes(24.1-25.9%) and curcumin(21.7-41.0%) yields, respectively, compared to F control. The content of amino acids increased significantly by SM and OMWM treatments. SM and OMWM application also increased the total phenol yields 7.8 and 8.7 g/10a compared with control 6.3 g/10a, the flavonoid yields 6.3 and 7.3 g/10a compared with control 5.3 g/10a, and also antioxidant activity 21.7 and 41%, respectively, as compared to the control. Especially, OMWM was more effective in total rhizomes yields and bioactivities and in the biosynthesis of curcumin and bioactive components than SM treatments, but the biological pathway was not clear, still. This experiment suggests that curcumin or bioactive components affected by adding SM and OMWM could increase the yields and quality of turmeric.