• 대한건축학회논문집:구조계
• /
• 제34권3호
• /
• pp.37-42
• /
• 2018

The use of fly ash in construction materials is increasing worldwide due the various advantages of using it, such as to produce durable concrete, or to use less cement and thus lower carbon dioxide emissions. The quality of fly ash is often determined by loss on ignition value (LOI), where an upper limit of LOI is set in each country for quality control purpose. However, due to many reasons, production of high LOI fly ash is increasing that cannot be utilized in concrete, ending up in landfill. In this study, the effect of fly ash use in cementitious materials on nitrogen oxides adsorption is examined. In particular, the effect of using high LOI, and thus high carbon content fly ash on nitrogen oxides adsorption is investigated. The results suggest that the higher carbon content fly ash is related to higher nitrogen dioxide adsorption, although normal fly ash was also more effective in nitrogen dioxide adsorption than ordinary portland cement. Also, higher replacement rate of up to 40% of fly ash is beneficial for nitrogen dioxide adsorption. These results demonstrate that high carbon fly ash can be used as construction materials in an environmentally friendly way where strength requirement is low and where nitrogen oxides emissions are high.

• 한국식품영양과학회지
• /
• 제34권7호
• /
• pp.1035-1040
• /
• 2005

전자레인지를 이용한 조리는 간편 조작 및 조리시간 단축 등의 장점이 있으나, 전자파에 의한 급격한 온도상승으로 식품, 특히 전분성 냉동식품 등의 표면에 급격한 수분증발을 유도하여 식품의 식감저하 및 품질저하 등의 문제점을 발생시킨다. 이를 개선하고자 4종의 도포제를 전분표면에 도포하여 저장 및 전자레인지 가열에 의한 수분을 억제효과를 검토하였다. 조건별로 제조된 시료들을 저장조건 즉 저장온도별$(0,\;20,\;-50^{\circ}C)$, 저장기간(90일)을 달리하여 조사하였다. 실험시료의 물성측정 결과 0, $-20^{\circ}C$에서 저장기간이 길어질수록 hardness, brittleness, cohesiveness 등이 증가되었고, tapioca(TA) 혼합첨가구의 hardness, springiness, gumminess, brittleness, cohesiveness 등이 기본반죽물(Control)보다 낮은 것으로 조사되었다. TA 혼합첨가구 중에서도 $7\%$ M3를 도포한 시료(TM)의 물성이 가장 좋은 것으로 조사되어 TA첨가 및 $7\%$ M3도포가 전자레인지 가열 조리에 의한 품질저하방지에 효과적임을 알 수 있었다. 열전 위 변화는 저 장기간이 길어질수록 호화개시 온도(To)는 낮은 쪽으로 이동하고, 엔탈피는 점차적으로 증가하는 경향을 보였으며, endothermic peak의 면적도 함께 증가하였다. 또한 다른 시료들에 비해 TM의 흡열엔탈피 $({\Delta}H)$가 낮은 것으로 보아 $7\%\;M3$의 도포가 표면의 품질저하방지(경화억제)에 효과적임을 알 수 있었으며 SEM을 이용한 미세구조관찰 시에도 이를 확인할 수 있었다. 저장된 냉동전분들의 물성 및 노화정도를 측정한 결과 control보다는 도포제가 도포가 되지 않은 TN과 TM의 효과가 더 좋았으며, 그 중 $7\%\;M3$가 도포된 TM이 전자레인지 가열조리에 따른 품질개선에 가장 효과적인 것으로 조사되었다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2003년도 한국우주과학회보 제12권2호
• /
• pp.26-26
• /
• 2003

During fabrication process for the large space optical surfaces, the traditional bound abrasive grinding with bronze bond cupped diamond wheel tools leaves the machine marks and the subsurface damage to be removed by subsequent loose abrasive lapping. We explored a new grinding technique for efficient quantitative control of precision CNC grinding for space optics materials such as Zerodur. The facility used is a NANOFORM-600 diamond turning machine with a custom grinding module and a range of resin bond diamond tools. The machining parameters such as grit number, tool rotation speed, work-piece rotation speed, depth of cut and feed rate were altered while grinding the work-piece surfaces of 20-100 mm in diameter. The input grinding variables and the resulting surface quality data were used to build grinding prediction models using empirical and multi-variable regression analysis methods. The effectiveness of the grinding prediction model was then examined by running a series of precision CNC grinding operation with a set of controlled input variables and predicted output surface quality indicators. The experiment details, the results and implications are presented.

• 한국식품영양과학회지
• /
• 제43권9호
• /
• pp.1394-1399
• /
• 2014

본 연구는 무의 재배 시 가공황토 처리 여부에 따른 무 시료의 품질 특성을 비교하고자 무 시료를 동일한 조건으로 재배하여 일반성분, 물성, 영양소, 기능적 특성을 분석하였다. 조회분과 조지방 함량에서 실험구1, 2가 대조구 대비 더 높은 함량을 나타내었다. 또한 분석된 모든 무기성분 및 비타민 함량에서 실험구1, 2가 대조구 대비 유의적으로 높은 함량을 나타내었다. 실험구1, 2에서 비타민 C의 함량이 대조구보다 높게 나타남과 동시에 항산화 활성 또한 유의적으로 높은 것을 확인할 수 있었다. 또한 견고성 측정 결과 대조구에 비하여 황토처리 된 실험구1, 2의 경우 저장기간 동안 견고성 감소율이 낮아 저장기간 동안 조직감의 유지가 가능한 것으로 나타났다. 따라서 무 재배 시 친환경 가공황토소재를 화학비료 대신 적용하여 재배할 경우 무의 저장성이 강화된 고품질의 무 생산이 가능해지고 기능성이 부가된 다양한 무를 활용한 고부가가치 제품이 가능해져 국내 무 시장의 활성을 촉진시킬 수 있다고 판단된다.

• 한국지반공학회논문집
• /
• 제24권10호
• /
• pp.105-111
• /
• 2008

하천제방의 안정성 향상을 위해서는 양질의 성토재료 사용, 철저한 다짐관리, 적절한 수리구조물 및 차수벽 설치 등이 필요하다. 특히, 하천제방 축조를 위한 양질의 성토재료는 하천제방의 안정성에 있어서 가장 중요한 요소라고 할 수 있다. 따라서 본 연구에서는 국내 하상토의 제방 성토재로서 적합성 평가를 위한 기초연구로서, 국내 하상토의 제체재료로서의 침투에 대한 안정성 평가를 위하여 하천설계기준(2005)의 제체 표준단면을 이용한 모형시험과수치해석을 수행하였다. 그 결과 국내 발생 하상토의 경우 대부분이 모래(SP)로서 하천설계기준 제체재료의 투수계수 ($10^{-3}cm/sec$ 이하)를 만족시키지 못하였으며 양질토 혼합 및 함수비 조정 등과 같은 안정처리공법이 요구되는 것으로 나타났다.

• 한국정밀공학회지
• /
• 제32권1호
• /
• pp.9-16
• /
• 2015

The machining-chatter stands for a sudden relative vibration appeared between a material and a tool while processing with a machine. This chatter is key factor that seriously affects the quality of processed materials as well as being a factor which causes serious damages to the tool and the machine. This study is related to the monitoring and smart control of chatter problem that can compensate machining-chatter faster and produce processed goods with more precision by autonomous compensation. The above-mentioned machining-chatter compensator includes the chatter vibration sensor and the chatter compensator that estimates the compensation value according to the sensor detecting the chatter vibration of machine-tool and the chatter vibration detected from the sensor while having a feature of being organized by interlocking with the machine-tool controller.

• 대한안전경영과학회지
• /
• 제4권4호
• /
• pp.1-14
• /
• 2002

As domestic buildings have been large-scaled, diversified and high-rise, there have been a consistent demand for design, development of construction technology and accident prevention activity as well as quality enhancement. In spite of governmental and related institutions' efforts for reducing national losses which come from numerous accidents, there have been endless small and large accidents on the construction site and thus, it is urgent to conduct empirical researches in this area. Currently safety supervision system in construction industry has enforced harm and danger prevention planning system, however it merely stick to other existing materials. In addition, it is difficult to put it into practice in that it requires bearing too much burden to draw out the planning itself in a case of large construction work. Consequently in this paper we select evaluation criteria by construction progress, classify into several categories, and regard potential danger which often occurs, as a evaluation criterion. Further step is to allow workers or collaborated companies to express their expert opinions or experiences and to encourage quality and process control and autonomous safety control by applying PSM method. The reason why PSM method should be quantitative and substantial progress is because it contributes Korean constructing companies to enhancing their safety control ability and to taking an equal stance just like developed countries,' thereby strengthening there competitive edges. Boost of safety control system by PSM method will make an enormous contribution to preventing construction accidents on the site by establishing and securing an autonomous safety control system.

• 품질경영학회지
• /
• 제29권3호
• /
• pp.166-176
• /
• 2001

This paper considers a six sigma project for reducing the color variation of the monitor materials in a chemical plant. The project follows a disciplined process of five macro phases: define, measure, analyze, improve, and control (DMAIC). A process map is used to identify process input variables. Three key process input variables are selected by using an input variable evaluation table; a melting pressure, a coloring agent, and a DP color variation. DOE is utilized for finding the optimal process conditions of the three key process input variables. The sigma level of defects rate becomes a 4.58 from a 2.0 at the beginning of the project.

• Journal of Forest and Environmental Science
• /
• 제34권1호
• /
• pp.77-81
• /
• 2018

Mass production of forest medicinal plants is related to quality control of raw medicinal materials. Plant tissue culture is an important technology to produce high-quality plant materials. Numerous factors are reported to influence the success of in vitro regeneration of medicinal plants. Embryogenesis is known to be the most effective techniques and it has developed in some medicinal plant species. Various in vitro cultural condition for direct and/or indirect somatic embryogenesis systems have developed in Epimedium koreaum, Bupleurum falcatum, Paeonia lactiflora, Chrysanthemum zawadskii, Houttuynia cordata etc. In this study, we provide the present statue and information of in vitro propagation techniques that is able to apply as an efficient system for rootstock propagation system of forest medicinal plants.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권4호
• /
• pp.311-317
• /
• 2008

The measurement of dark ${\sigma}_D$, gamma-induced ${\sigma}_{\gamma}$ conductivities and the expected conductivity modulation ${\Delta}_{\sigma}$ in silicon wafers/samples is studied for developing a new technique for carrier lifetime evaluation. In this paper a simple method is introduced to find the carrier lifetime variations with the measured conductivity and conductivity modulation under dark and gamma irradiation conditions. It will be concluded that this simple method enables us to give an improved wafer evaluation, processing and quality control in the field of photovoltaic materials and other electronic devices.