• Journal of Korean Society for Quality Management
• /
• v.13 no.2
• /
• pp.37-47
• /
• 1985

There are several productive maintenance problems that are closely concerned with product quality. In these problems, we have process capability, out-worn equipment problems, plant layout planning, maintenance cost, investment decisions and so on. These problems are analyzed, and some conceptial and applicable systems are developed in this paper. The purpose of this paper is to define that in productive maintenance problems awaiting solution is a necessary condition for improvement on product quality, quality assurance and product liability prevention at this time, and to find an applicable total system.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.48
• /
• pp.269-277
• /
• 1998

In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceding/succeeding production process including inspection. This approach recognizes that the decision to be made at one manufacturing process (or assembly process) determine not only the cost and the average outgoing quality level of that process but also the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing/assembly quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a single product manufacturing system with specified average outgoing quality limit (AOQL) are suggested.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.25 no.2
• /
• pp.1-10
• /
• 2002

Process capability indices are widely used in industries and quality assurance system. In past years, process capability analysis have been used to characterize process performance on the basis of univariate quality characteristics. However, in actual manufacturing industrial, statistical process control (SPC) often entails characterizing or assessing processes or products based on more than one engineering specification or quality characteristic. Therefore, the analysis have to be required a multivariate statistical technique. This paper introduces to multivariate capability indices and then selects a multivariate process capability index incorporated both the process variation and the process deviation from target among these indices under the multivariate normal distribution. We propose a new multivariate capability index $MC_{pm}^+$ using quality loss function instead of the process variation and this index is compared with the proposed indices when quality characteristics are independent and dependent of each other.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.46
• /
• pp.119-125
• /
• 1998

In this study, a traditional concept of sampling inspection plan for the quality assurance system is extended to a consideration of economic aspects in total production system by representing and analyzing the effects between proceeding / succeeding production process including inspection. This approach recognizes that the decision to be made at one manufacturing process (or assembly process) determine not only the cost and the average outgoing quality level of that process but also the input parameters of the cost and the incoming quality to the succeeding process. By analyzing the effects of the average incoming and outgoing quality, manufacturing / assembly quality level and sampling inspection plan on the production system, mathematical models and solution technique to minimize the total production cost for a single product manufacturing system with specified average outgoing quality limit(AOQL) are suggested.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.12
• /
• pp.115-122
• /
• 2018

As the proportion of software in weapon systems increases, the impact of software on the overall system is growing. As a result, software quality management becomes important, and related regulations and work manuals for quality assurance activities at each stage in the R & D process are becoming more sophisticated. However, due to the characteristics of the weapon system software that is developed as a customized form for the purpose of a specific mission, there are limits to specifying and definitizing the detailed requirements (upper and lower level) according to various operational concepts during the development process. Due to this, software modification (patch change, shape change due to upgrade, etc.) occurs on account of many defects and performance improvement in the mass production and operation stage after the development is completed. In this study, we analyze the characteristics of these weapon system softwares and propose quality improvement methods based on ISO / IEC / IEEE 29119 test method.

• Journal of Korean Society of Archives and Records Management
• /
• v.11 no.1
• /
• pp.183-206
• /
• 2011

The research and laboratory records management is the prerequisite for quality research. Quality research assurance system can work out on the sound basis of quality research records management. It is an important task that establishing a proper research and laboratory records system for obtaining quality of research according to the rapid growth of Research and Development area in Korea and the trend of electronic laboratory notebooks. The purpose of this study is to identify issues and find a direction for solutions related to the research and laboratory records management systems. For this after analysing previous studies and current status related to the research records management and GLP(Good Laboratory Practice) is benchmarked as a best practice for quality research, some suggestions for enhancement of research records management are given as a result.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.2
• /
• pp.146-173
• /
• 1998

It is one of the most important factors Seafarers Education Quality Assurance and management in Higher Maritime Education Institution. The educational process and result of Higher Maritime Educational Institution. The educational process and result of Higher Maritime Educational Institution should be evaluated according to the 1995 Amendments to the International Convention on Standards of Training Certification and Watchkddping for Seafares(STCW) 1978. Actuall above-mentioned evaluation is deemed to make foundation in order to enhance the efficiency of shipboard education by surveying the satisfaction of shipboard training for Marine Engineering part cadets by the group. In this paper we carried out the questionnaire survey to study stisfactory value and the reason of dissatisfaction of 89 cadets being trained on board the Training Ship in Maritime College of Korea Maritime University The results were calculated by frequency and percentage; the significance of difference among Department groups like Marine Engineering Maritime polic and Ship Operating Systems Engineering Engineering was analysed by $x^2$ inspection.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.1
• /
• pp.69-73
• /
• 2018

Korean-peacekeeper's transparent armors in Iraq showed delamination, cracking and clouding a decade ago. And there were also similar deterioration recurrences in KLTV during the operational test a few years ago. Also, the differences between operational capability & lab Bullet-proof test condition, and insufficiency of military protection spec resulted in incomplete bullet-proof results. Moreover, although so many ground weapon systems have been developed, there were not secure test & evaluation codes to verify transparent armoured glasses equal to advanced-overseas products. So in this study, first, environmental test codes were established that all tests should be carried out as the application of only one specimen with newly adopted thermal shock test instead of completing each test with different one. Second, protection standards were integrated through the analysis of global developed country's specifications and reinforced as adding to the real mock-up condition if vehicle's glasses are smaller than standard specimen. Hereby, by applying to test-codes which including actual operational & vehicular conditions, the gap between development test and operational environment was minimized.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.227-232
• /
• 2004

Vehicle dynamics control systems are complex and non-linear, so they have difficulties in developing a controller for the anti-lock braking systems and the auto-traction systems. Currently the fuzzy-logic technique to estimate the absolute vehicle speed supplies good results in normal conditions. But the estimation error in severe braking is discontented In this paper, we estimate the absolute vehicle speed of UCT(Unmanned Container Transporter) by using the wheel speed data from standard anti-lock braking system wheel speed sensors. Radial symmetric basis function of the neural network model is proposed to implement and estimate the absolute vehicle speed, and principal component analysis on input data is used 10 algorithms are verified experimentally to estimate the absolute vehicle speed and one of them is perfectly shown to estimate the vehicle speed within 4％ error during a braking maneuver.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.36 no.4
• /
• pp.84-91
• /
• 2013

For service innovation, it is crucial to measure the quality of service and identify the factors which affect it. In this study, for that purpose, a composite research model based on SERVQUAL and the technology acceptance model is proposed. The model is applied to three different service areas-Internet shopping, Internet banking, and cloud service. Analysis has been performed using the SEM methodology. The analysis shows that reliability, responsiveness and assurance affects the service quality in different ways for each, the result of which enables us to identify quality-determining factors in various service areas.