• 보건행정학회지
• /
• 제29권4호
• /
• pp.379-381
• /
• 2019

Korea's healthcare is in great danger of sustainability. In 2020, the baby boomer will begin to be older, and there is no promise that the total fertility rate of 1.0 or less will rebound, and Korea's economic growth rate is predicted to be less than 2%. Together with these phenomena, Plan for Benefit Expansion in Nation Health Insurance (Moon Jae-in Care) will seriously threaten the sustainability of health insurance finance. In addition, health care in Korea has many problems: excessive medical utilization, rapidly increasing elderly medical costs, concentrating patients into big hospitals, low healthcare personnel but many healthcare facilities and equipment, bad quality of primary and mental care, and fast-growing health expenditure. For sustainability, healthcare of Korea should be reformed. The direction of the reform is people-centered and integrated healthcare in the community which is composed of empowering and engaging people, strengthening governance and accountability, reorienting the model of care, coordinating services, and creating an enabling environment.

• Macromolecular Research
• /
• 제11권2호
• /
• pp.110-114
• /
• 2003

When using the dipping method for crystal formation, mono-layered colloidal crystal structures depend upon the lift-up rate of a glass substrate. The mono-layered colloidal crystals showed the highest quality when the glass substrate was raised at a rate of 3 mm/min at 25 $^{\circ}C$ in a 1 wt% polystyrene colloidal suspension (ethanol medium). In addition, in order to obtain multiple-layered colloidal crystals, an external electric Held was introduced. Multiple-layered colloidal crystals were successfully obtained via this method. The colloidal particles were well ordered over large areas and assembled into a homogeneous structure.

• Journal of Welding and Joining
• /
• 제31권4호
• /
• pp.42-46
• /
• 2013

The contact tip for flux cored arc welding has important functions to transmit the welding current to the wire and to guide the wire to molten pool. A damaged contact tip causes a productivity reduction and a welding quality problem. In this study, the welding experiments for the wear resistance of contact tip regarding flux cored wire types were performed. With two fold type and a seamless type flux cored wires, the wear rates of contact tips were compared. In addition, the wear rate was checked according to the contact tip position.

• 한국전자파학회논문지
• /
• 제15권10호
• /
• pp.938-943
• /
• 2004

본 논문에서는 CPW에 식각된 T자형 DGS를 제안하고 전송이론을 이용하여 전파 방사를 포함한 손실률, BW(3-dB fractional bandwidth) 등을 closed-form 형태의 수식으로 유도하고 이의 영향에 대해 분석한다. 제안된 T자형 DGS 구조는 기존의 아령형 DGS 구조보다 약 5.5배정도 큰 커패시턴스(C) 조절 특성을 가진다. 또 DGS 등가회로의 R, L, C값과 손실률, BW, 저지대역 공진 각주파수($\omega_0$)의 상관관계를 정량적으로 이끌어낸다.

• 펄프종이기술
• /
• 제32권1호
• /
• pp.33-40
• /
• 2000

The effectiveness of silica-based microgels prepared through the reaction of sulfuric acid and sodium silicate as a component of Compozil system has been evaluated . Silica based microgels with better performance in retention and drainage than a commercial colloidal silica sol have been successfully prepared. Silica gels with the highest charge density were obtained when product pH was controlled to 9. And highly charged silica-based microgels showed greater retention and freeness performance than a commerical product. In particular the difference in retention, turbidity , and freeness between these microgels and a commercial product was eminent at low addition rate. The effects of reaction conditions including reaction temperature, process water quality and feeing rate on product efficiency in improving retention and drainage were also investigated and discussed.

• Design & Manufacturing
• /
• 제14권4호
• /
• pp.52-57
• /
• 2020

In this study attempted to prevent defects due to blow holes among defects of sand casting products. It was intended to reduce the defect rate by reducing the blow hole of the inner surface. Currently, expectations and requirements for the quality level of non-ferrous aluminum casting in the casting industry are increasing. In addition, the shape is complex and the shrinkage precision is required. Among them, the test prototype is expensive to manufacture the mold, and the production time is also long, and the product is manufactured by sand casting. At this time, the highest defect rates are defects caused by shrinkage defects, surface defects, and blow holes.. At this study, the manufacturing time was shortened by using the shape of the fluid movement path in advance. Also, it is possible to reduce defects due to blow holes.

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.347-355
• /
• 2017

This study investigated how the combined changes in environmental conditions and nitrogen (N) deposition influence the mineralization processes and carbon (C) dynamics of wetland soil. For this objective, we conducted a growth chamber experiment to examine the effects of combined changes in environmental conditions and N deposition on the anaerobic decomposition of organic carbon and the emission of greenhouse gases from wetland soil. A chamber with elevated $CO_2$ and temperature showed almost twice the reduction of total decomposition rate compared to the chamber with ambient atmospheric conditions. In addition, $CO_2$ fluxes decreased during the incubation under the conditions of ambient $CO_2$ and temperature. The decrease in anaerobic microbial metabolism resulted from the presence of vegetation, which influences the litter quality of soils. This can be supported by the increase in C/N ratio over the experimental duration. Principle component analysis results demonstrated the opposite locations of loadings for the cases at the initial time and after three months of incubation, which indicates a reduction in the decomposition rate and an increasing C/N ratio during the incubation. From the distribution between the decomposition rate and gas fluxes, we concluded that anaerobic decomposition rates do not have a significantly positive relationship with the fluxes of greenhouse gas emissions from the soil.

• 전자공학회논문지
• /
• 제50권2호
• /
• pp.11-19
• /
• 2013

인터넷 서비스 제공자들은 차등화 서비스를 제공하기 위한 정책적인 수단으로, 혹은 일부 악의적인 사용자들로 인한 회선의 독점적 사용을 막기 위한 수단으로 각 사용자의 최대 데이터 전송 속도를 일정 수준 이하로 제한하고 있다. 이 논문에서는 이러한 최대 접속 속도의 제한이 서비스 제공자의 수입과 서비스 가격 결정에 미치는 영향을 분석하고자 한다. 우리는 먼저 최대 접속 속도의 제한을 고려한 현실적인 인터넷의 서비스 품질 모델을 제안하고, 각 사용자에 대한 최대 접속 속도의 제한이 사용자들의 서비스 가입 결정에 어떻게 영향을 미치는 지 분석한다. 또한 그에 따라 변화하는 서비스 제공자의 수입이 안정성을 보장 받기 위한 조건을 유도하여, 수입을 최대화하기 위한 가격 결정 방법을 최적화 문제로 나타낸다.

• Journal of Mechanical Science and Technology
• /
• 제17권12호
• /
• pp.2053-2065
• /
• 2003

The current trend in automotive finishing industry is to use more electrostatic rotating bell (ESRB) need space to their higher transfer efficiency. The flow physics related with the transfer efficiency is strongly influenced by operating parameters. In order to improve their high transfer efficiency without compromising the coating quality, a better understanding is necessary to the ESRB application of metallic basecoat painting for the automobile exterior. This paper presents the results from experimental investigation of the ESRB spray to apply water-borne painting. The visualization, the droplet size, and velocity measurements of the spray flow were conducted under the operating conditions such as liquid flow rate, shaping airflow rate, bell rotational speed, and electrostatic voltage setting. The optical techniques used in here were a microscopic and light sheet visualization by a copper vapor laser, and a phase Doppler particle analyzer (PDPA) system. Water was used as paint surrogate for simplicity. The results show that the bell rotating speed is the most important influencing parameter for atomization processes. Liquid flow rate and shaping airflow rate significantly influence the spray structure. Based on the microscopic visualization, the atomization process occurs in ligament breakup mode, which is one of three atomization modes in rotating atomizer. In the spray transport zone, droplets tend to distribute according to size with the larger drops on the outer periphery of spray. In addition, the results of present study provide detailed information on the paint spray structure and transfer processes.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.27-28
• /
• 2019

Recently, a bed company detected a radon more than Red Politics and became a hot topic of conversation. This has led to increased interest in radon, and a number of free-of-charge bodies have also been established to recognize the dangers of radon. In addition, the Korean Institute of Geological and Resource Research is planning to assist the installation of radon alarm systems in 10,000 households nationwide, free of charge. Since radon is a colorless, odorless and tasteless gas that causes lung cancer, it aims to reduce lung cancer incidence by absorbing radon using bamboo activated carbon as a way to reduce it. Due to the use of bamboo activated carbon, radon concentration per hour tends to decrease as substitution rate increases, and table flow tends to decrease as substitution rate increases. Through this experiment, 30% of the replacement rate of bamboo activated carbon is judged to be the most suitable replacement rate.