• 한국컴퓨터정보학회논문지
• /
• 제26권3호
• /
• pp.173-180
• /
• 2021

본 연구에서는 해외직구의 품질 요인(정보 품질, 시스템 품질, 서비스 품질)과 지각된 가치, 구매 의도와의 영향 및 가격 민감도의 조절 효과를 살펴보기 위하여 선행연구를 바탕으로 변수를 구성하였다. 해외직구 이용자를 대상으로 설문조사가 이루어졌으며 178개의 설문지를 실증분석에 사용하였다. 수집된 데이터는 SPSS 25.0과 AMOS 21.0에 의해 분석되었다. 그 결과는 다음과 같다: 첫째, 해외직구의 품질 요인은 지각된 가치에 모두 긍정적인 영향을 미치는 것으로 나타났다. 둘째로, 해외직구의 품질 요인은 구매 의도에 모두 긍정적인 영향을 미치는 것으로 나타났다. 셋째, 해외직구 품질 요인과 지각된 가치, 구매 의도와의 관계에서 가격 민감도의 조절 효과를 검정한 결과, 그룹 간의 차이는 없는 것으로 나타났다. 분석 결과를 바탕으로 본 연구의 시사점과 한계점을 제시하였다.

• Architectural research
• /
• 제14권3호
• /
• pp.93-98
• /
• 2012

The objective of the study is to analyze the relative performance of factors affecting indoor air quality in multi-residential buildings in Korea. A study of the factors affecting indoor air quality is essential for establishing indoor air quality management strategies effectively. To observe the indoor air quality response following a modification of a given parameter, a sensitivity analysis was performed. The factors examined for the analysis include; wall/ceiling paper, adhesive for wall/ceiling paper, floor material, adhesive for floor material, and ventilation rate. The Experimental Design which identifies main effects among the design parameters with a few experiments was used to decrease the number of experiments. The simulation for indoor air quality was undertaken using a validated equation. Then, ANOVA(Analysis of Variance) was performed to evaluate the relative importance of each parameter affecting the indoor air quality. The result of the study indicates that the indoor air quality may be influenced most by adhesive for wall/ceiling paper, followed by ventilation rate and adhesive for floor material.

• 품질경영학회지
• /
• 제30권1호
• /
• pp.144-151
• /
• 2002

Consider the problem of estimating the confidence interval of defect rate of a specified population through a screening test. Relationship between defect rate of the population and sensitivity and specificity of the screening test is discussed. More general statistical problem is introduced with the assumption of unknown imperfect specificity. An improved version of Hogan & Gladden(1978)'s estimator is proposed and discussed. Simulation studies are performed to compare the efficiency of the proposed estimator with current estimators.

• 한국보육지원학회지
• /
• 제20권1호
• /
• pp.73-89
• /
• 2024

Objective: The purpose of this study was to examine the effect of communication and cooperation between teachers and parents on infant care. Specifically, this study explored the direct effect of teacher-parent partnership on teacher-infant interactions and the indirect effect through teacher sensitivity. Methods: The participants of this study were 216 teachers in charge of infant classes at child care centers located in Gyeonggi-do. They responded to questionnaires on teacher-parent partnership, their sensitivity, and teacher-infant interactions. Data were analyzed using structural equation modeling. Results: First, teacher-parent partnership did not have a direct impact on teacher-infant interactions. Second, teacher-parent partnership indirectly influenced teacher-infant interactions through teacher sensitivity. In other words, a high level of teacher-parent partnership was associated with a high level of sensitivity, subsequently resulting in the provision of high-quality interactions for infants. Conclusion/Implications: This study confirmed the role of teacher sensitivity as a mechanism to explain how teacher-parent partnership is linked to teacher-child interactions. The results emphasize the importance of communication and cooperation between teachers and parents in enhancing teachers' sensitivity and, ultimately, providing high-quality child care to infants.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.909-917
• /
• 2007

Recently the trend of automobile industry is that IQS evaluation index against a sensitivity quality is increasing. To reduce rattle noise due to speaker sound at low frequencies, it is required the advanced investigation of a package tray panel and a door module panel. This paper optimized the design parameters of package tray panel according to the theoretical background about robust design and suggested the design guideline for resonance avoidance and the reduction of vibrational sensitivity considering the excitation frequency of woofer speaker. In addition, it is suggested the design guideline of a door module panel through the sensitivity analysis in case of the speaker excitation. Finally, the design factor analysis of the quality deviation of a mother-car will make it possible to guarantee the stable characteristics of vehicle vibration in the early stage of vehicle development. These improvements can lead to shortening the time needed to develop better vehicles.

• 한국소음진동공학회논문집
• /
• 제17권8호
• /
• pp.673-682
• /
• 2007

Recently the trend of automobile industry is that IQS evaluation index against a sensitivity quality is increasing. To reduce rattle noise due to speaker sound at low frequencies, it is required the advanced technology analysis process of body structure. This paper optimized the design parameters of package tray panel according to the theoretical background about robust design and suggested the design guideline for resonance avoidance and the reduction of vibrational sensitivity considering the excitation frequency of woofer speaker. And this paper described the design process of a door module panel through the sensitivity analysis in case of the door speaker excitation. Finally, the analysis of the quality deviation using mother car is suggested to guarantee the stable characteristics of vehicle vibration in the early stage of vehicle development. These improvements can lead to shortening the time needed to develop better vehicles.

• 한국콘텐츠학회논문지
• /
• 제19권12호
• /
• pp.517-526
• /
• 2019

본 연구는 자동노출제어장치 사용 시 파라미터 조합에 따른 영상 화질과 방사선 출력을 분석하여 임상에 적용할 수 있는 최적의 방법을 모색하고자 하였다. 실험방법은 관전압 70, 81 kVp와 자동노출제어장치(Automatic Exposure Control, AEC)의 감도 S200, S400, S800, S1000을 조합해서 복부와 골반부의 입사표면선량, 관전류량, 신호 대 잡음비(Signal to Noise Ratio, SNR), 대조도 대 잡음비(Contrast to Noise Ratio, CNR), 시간-방사선량 곡선을 구하였다. 그 후 영상 화질과 출력의 안정성을 평가하였다. 그 결과 입사표면선량, 관전류량, 신호 대 잡음비, 대조도 대 잡음비는 관전압과 감도가 높게 설정될수록 감소하였다. 또한 관전압과 감도가 높게 설정될수록 시간-방사선량 곡선은 출력의 안정성이 줄어드는 양상을 보였다. 결론적으로 복부와 골반부 검사 시 관전압과 감도를 높게 조합할수록 검출기는 영상 화질과 방사선 출력을 정상적으로 재현해내지 못하였다. 따라서 비교적 낮은 관전압과 감도를 조합하여 검출기가 파라미터의 조합을 인식할 때 발생하는 오차 범위를 최소화해야 영상 화질과 방사선 출력의 안정성을 최적화할 수 있다는 것을 알 수 있었다.

• 한국정밀공학회지
• /
• 제20권6호
• /
• pp.37-46
• /
• 2003

This paper is to predict quality deterioration resulting from a caulking process of yoke which is a part of automotive steering system. The caluking is a plastic deformation process involving such as impact of high speed tool, contacts between part and fixtures and strain rate sensitivity of the part material. Elaborate application of finite element method is neccesary to calculate changes of part dimensions because they fall into a level of tolerances. Simple work hardening and strain rate sensitive model is proposed fur the material and applied for the simulation by using Abaqus which is able to cater for elastoplastic rate sensitive material and contacts. Numerical results of test models that represent tensile bar and tensile plate are compared with material data inputs. Dimensional changes for the yoke are calculated from simulations and compared to the mesurements and they show good agreement. The method presented here with the material model proved to be valuable to assess quality deterioration for similar metal forming processes.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권2호
• /
• pp.14-19
• /
• 2021

Aim of this research was to investigate the effects of Digital Elevation Model (DEM) for sensitivity analysis with two types of DEMs: 1 to 24,000 and 1 to 250,000 DEM. Another emphasis was given to the development of methodology for processing DEMs to create ArcGIS Pro and GRASS layers. This was done while developing water quality system modeling using DEMs which were used to model hydrological processes and SWAT model. Sensitivity analysis with DEMs resulted in different runoff volumes in the model simulation. Runoff volume was higher for the 1:24,000 DEM than 1:250,000 DEM, probably due to the finer resolution and slope which increased the estimated runoff from the watershed. Certainly the DEMs were factors in precision of the simulations and it was obvious during sensitivity analysis that DEMs had significant effect on runoff volumes. We suggest, however, that additional comparative research could be conducted involving more parameters such as soil and hydrologic parameters to provide insight into the overall physical system which the SWAT model represents.

• 센서학회지
• /
• 제31권2호
• /
• pp.107-114
• /
• 2022

The effects of ring radius and coupling spacing on the free spectral range (FSR), full width at half maximum (FWHM), quality factor, and sensitivity of single-channel and add-drop channel slot ring resonators were systematically investigated using FIMMPROP and PICWAVE numerical software. The single-channel ring resonator exhibited better characteristics, namely, a wider FSR and narrower FWHM compared with the add-drop structure; thus, it was evaluated to be more suitable for biochemical sensors. The FSR, FWHM, quality factor, and sensitivity for a single channel ring resonator with a radius of 59.4 ㎛ and coupling gap of 0.5 ㎛ were 2.4 nm, 0.087 nm, 17677, and 550 [nm/RIU], respectively.