• International Journal of Automotive Technology
• /
• 제6권4호
• /
• pp.367-374
• /
• 2005

This paper proposes a sound quality index to evaluate the vehicle interior noise. The index was developed using a correlation analysis of an objective measurement and a subjective evaluation data. First, the objective set of measurements was obtained at two specified driving conditions. One is from a wide-open test condition and the other is from a constant-speed test condition. At the same time, subjective evaluation was carried out using a score of ten scale where 17 test engineers participated in the experiment. The correlation analysis between the psycho-acoustic parameters derived from the objective measurement and the subjective evaluation was performed. The most critical factors at both test conditions were determined, and the corresponding equations for the sound quality were obtained from the multiple factor regression method. Finally, a comparative work between previous index and present index was performed to validate the effectiveness of the proposed index.

• 한국소음진동공학회논문집
• /
• 제15권8호
• /
• pp.939-944
• /
• 2005

In this paper, a sound quality index for the evaluation of the vehicle intake noise was developed through a correlation analysis of the objective measurement and the subjective evaluation. First, intake orifice noise was measured at the wide-open throttle sweep condition. And then, the acoustic transfer function between intake orifice noise and interior noise was measured. Simultaneously, subjective evaluation was carried out with a 10-scale score by 8 special engineers. The correlation analysis between the psychoacoustic parameters derived from the measurement and the subjective evaluation was performed. The most critical factor was determined and the corresponding sound quality index for intake noise was obtained from the multiple factor regression analysis method. Finally, the effectiveness of the proposed index was validated.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.705-710
• /
• 2002

Recently, there has been for a number of reasons growing interest in the use of porous concrete, and it is used as an ecological material. But, because the valuation methods of the quality on the fresh porous concrete aren't established up till now, it is difficult that the harden porous concrete is made sure of its required quality. This study is to present the measurement method of the void ratio on the fresh porous concrete and to analyze the influence of water-cement ratio and vibrating time on the binder content covered a coarse aggregate. Results of this study were shown as follows; The measurement methods of the void ratio and aggregate-binder weight ratio on the fresh porous concrete can be useful as data for the quality control of fresh porous concrete.

• 한국전자통신학회논문지
• /
• 제12권3호
• /
• pp.477-484
• /
• 2017

기존의 순환여과식 양식장에서는 전문 인력의 부족, 수입 측정 장비에 대한 높은 의존도 등으로 인하여 많은 어려움을 격고 있다. 이에 본 논문에서는 최신 IoT기술을 적용한 광학식 센서(pH, DO)를 이용하여 양식장 수조 내 오염도를 빠른 시간내에 측정할 수 있는 자동 수질 측정 시스템을 구현하고자 한다. 기존 시스템의 문제점은 양식장 수조를 사람이 일일이 확인하거나, 측정 장비를 수조 속에 넣고 직접 측정을 하여 물고기의 생육에 좋지 않은 영향을 주는 것이다. 본 논문에서는 시스템은 측정 장비를 수조 속에 담그지 않고 간접 측정을 하는 방식을 제안하고 염분 및 다수의 오염 물질이 포함된 환경에서도 양식장 내의 물고기의 생육에 영향을 주지 않고 지속적인 측정이 가능한 시스템을 개발하였다.

• 한국조리학회지
• /
• 제5권2호
• /
• pp.447-467
• /
• 1999

Most published work on product quality focuses on manufactured goods. The subject of service quality has received less attention. This distinction is important because some of the quality-improving strategies avaliable to manufacturers may be inappropriate for service firms. Services are performances, not objects. They are often produced in the presence of the customer, as in the cause of hotel restaurant services, quality occurs during service delivery, usually in an interaction between the customer and contact personnel of service firm. for this reason, service quality is highly dependent on the performance of employees, an organizational resource that cannot be controlled to the degree that components of tangible goods can be engineered. The study has begun as a basic study for customer satisfaction-oriented management in understanding the service quality of food & beverage products and through a systematic analysis of it. The major purpose of the study was to examine the relationship of the customer satisfaction and service quality in consideration of reliability, empathy, responsiveness, tangibility and assurance. An empirical research was conducted based on the previous theoretical studies. 286 customer at first class hotels in Seoul were selected as samples of this study. The time period of research was from February through March 1999, and answers were processed by SAS to yield frequency analysis, multivariate statistical analysis and regression analysis. The finding of the statistical treatment are frequencies, factor analysis, multiple regression analysis, path analysis. SERVQUAL method was used the service quality evaluation methods. After factor analysis, it was resulted to 3 factors. those were factor 1(assurance.empathy.responsiveness), factor 2(reliability), factor 3(tangibility). The findings of the statistical treatment are as follows. First, the attribute measurement of performance service quality was affected by customer satisfaction. Second, the attribute measurement of performance service qualify was affected by repurchase intention. Third, The attribute measurement of performance customer satisfaction was affected by repurchase intention. The result of study model was followed, service quality was affected repurchase intention than customer satisfaction. indirected effect through, service duality and customer satisfaction was affected repurchase intention.

• 대한토목학회논문집
• /
• 제38권5호
• /
• pp.751-760
• /
• 2018

현재 다짐공사는 작업자가 정해진 다짐횟수, 두께, 속도, 진동여부 등을 자신의 경험에 의해 개별적으로 판단하고 감독자의 육안 검사에 의해 다짐공사의 품질측정이 이루어지고 있으며, 작업 후 대표성이 떨어지는 재래식 다짐강도 측정방법인 일점시험(Spot test)을 통하여 후속 단계의 작업을 진행하고 있는 실정이다. 따라서 다짐작업 결과에 대한 정량적 확인이 불가능하며, 시공부실로 인한 문제점이 제기될 가능성이 상존하고 있다. 본 연구에서는 여러 가지 시험조건에서 실제 현장규모로 다짐을 수행한 후 연속 다짐강도 측정 방법과 재래식 다짐강도 측정 방법과의 비교를 통해 연속 다짐강도 측정 방법의 사용 타당성을 입증하였다. 타당성 입증은 연속 다짐강도 측정방법인 GPS (Global Positioning System)와 가속도계로 구성된 IC (Intelligent Compaction) 롤러의 CMV (Compaction Meter Value)를 분석하는데 있으며, 입증된 결과를 토대로 일점시험을 배제한 현장 전 범위 품질확인이 가능하다. 품질 확인은 본 연구에서 개발한 다짐공사 관제프로그램에 시각화되며, 이를 통해 현장관리자는 다짐작업과 동시에 실시간 품질 모니터링이 가능하다.

• 대한가정학회지
• /
• 제40권5호
• /
• pp.133-146
• /
• 2002

The purpose of this study was to verify a Structural Equation Model that constructed the causations among the leisure resources, health perception, leisure attitude, leisure satisfaction and the quality of life in the elderly. For the purpose, 208 elderly who were over sixty years old and inhabited in Seoul were given questionnaires. Questionnaires were distributed by means of a 1:1 personal interview method. A Measurement model and a structural equation model estimates by Maximum Likelihood method(ML method) utilizing LISREL 8.51 ver. The major results are summarized as follows: 1) A Goodness of fit is good of structural equation model presented in the study. 2) The higher their leisure resource is, the higher health perception is, the higher leisure attitude is the more leisure satisfaction. 3) The important valuable factor which affected the quality of life in the elderly was the leisure satisfaction. It showed powerfully if the elderly participate enjoyment, self-development and positive leisure activity, their leisure satisfaction would increase, consequently the Quality of life would be improved.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1039-1042
• /
• 2008

We propose a novel method to measure moving picture quality of display. This method simulates human visual system based on CSF (Contrast Sensitivity Function). And it evaluates moving picture quality of display on the image captured by pursuit camera. The results from this method are correlated with human visual perception test very well.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.1286-1291
• /
• 2004

This paper was showed evaluation method and technical items for measurement test of new catenary system of Honam(Daejeon - Mokpo) conventional railway electrified. This line have tested by three type new electric rolling stocks in order to test construction quality and operation safety of a new catenary system with speed-up than conventional speed. We have some important experiences through measurement test of catenary system by new device installed on train roof.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.127.4-127
• /
• 2001

Inspection and shape measurement of three-dimensional objects are widely needed in industries for quality monitoring and control. A number of visual or optical technologies have been successfully applied to measure three dimensional surfaces. Especially, the shape measurement using an interferometric principle becomes a successful methodology. However, those conventional interferometric methods to measure surface profile have an inherent shortcoming, namely 2∏ ambiguity problem. The problem inevitably happens when the object to be measured has discontinuous shape due to the repetition of interferometric signal with phase period of 2∏. Therefore, in this paper, we choose as a shape measuring method, ...