• 제목/요약/키워드: Quality Engineer

검색결과 204건 처리시간 0.021초

마이크로파일로 보강된 프리캐스트 콘크리트 옹벽의 최적보강형태에 관한 연구 (A Study on Optimal Reinforcing Type of Precast Retaining Wall Reinforced by Micropiles)

  • 김홍택;박준용;유찬호
    • 한국지반공학회논문집
    • /
    • 제22권11호
    • /
    • pp.89-99
    • /
    • 2006
  • 프리캐스트 콘크리트 옹벽은 현장타설 콘크리트 옹벽에 비해 공기 단축효과, 품질의 우수성, 교통 및 인접구조물과의 간섭 최소화 등 많은 장점을 가지고 있다. 하지만 지반조건이 비교적 양호한 직접기초형태의 경우에는 별도의 보강조치를 고려하지 않으면 자중만으로 저항하게 됨에 따라 옹벽의 단면이 증가하게 되고 그에 따른 운반상의 어려움 및 공사비 증가 등의 단점이 있다. 본 연구에서는 이러한 문제점을 보완하기 위한 방법으로 마이크로파일공법의 적용성을 평가해 보았다. 마이크로파일공법은 소형장비로 시공이 가능하므로 작업공간의 제약이 없고, 저비용 및 고효율의 장점을 가지고 있으나 보강효과를 높이기 위해 설치한 마이크로파일의 역학적 거동특성이 명확히 규명되지 않은 상태이며, 마이크로파일의 길이, 직경, 설치각도 및 설치위치 등에 대한 설치기준이 없고 경험에 의존하고 있는 실정이다. 따라서 본 연구에서는 프리캐스트 콘크리트 옹벽에 보강된 마이크로파일의 최적보강형태 및 보강효과를 규명 제시하기 위하여 활동 및 전도거동에 대한 실내모형실험을 각각 시행하였다. 또한 실내모형실험 결과를 토대로 제시된 마이크로파일의 최적보강형태를 검증하기 위한 목적으로 유한요소해석 및 한계평형해석 등의 수치해석을 수행하여 마이크로파일의 최적 보강형태를 제시하였다. 실내모형실험과 수치해석으로 프리캐스트 콘크리트 옹벽에 보강되는 마이크로파일의 최적보강형태를 평가한 결과, 마이크로파일은 옹벽높이의 0.4배 저판길이의 0.04배 일 때가, 최적의 보강효율을 보이는 것으로 평가되었다.

해양심층수염 절임배추와 시판 절임배추의 품질변화 비교 (Comparison of quality changes in brined cabbage with deep sea water salt and a commercial brined cabbage product)

  • 임지훈;정지희;김동수;김영명;김병목
    • 한국식품저장유통학회지
    • /
    • 제21권5호
    • /
    • pp.676-687
    • /
    • 2014
  • 본 연구에서는 천일염, 정제염, 해양심층수염을 사용하여 제조한 절임배추의 냉장저장($0^{\circ}C$) 중 품질변화 및 시판제품과의 품질특성을 비교 조사하였다. pH의 경우 저장기간 전반적으로 S, R, D 구가 CS, CR, CD 구에 비해 높았고, 적정산도는 저장기간 전반적으로 CS, CR, CD 구가 S, R, D 구에 비해 높았다. 수분함량은 저장기간이 경과할수록 삼투압 작용에 의하여 모든 실험군에서 감소하였고, 염도는 S, R, D 구가 2.0~2.6%로 CS, CR, CD 구(0.9~1.8%)에 비해 저장기간 동안 유의적으로 높았다. 총균수 및 유산균수는 CS, CR, CD 구가 저장 1주 이후부터 급격히 증가하여 저장기간 동안 S, R, D 구에 비해 유의적으로 높게 나타나 pH 및 적정산도의 변화에 영향을 주었다. 경도와 씸힘성의 경우 모든 실험군에서 저장기간이 경과함에 따라 감소하였고 저장기간 동안 해양심층수염으로 제조한 절임배추(D)의 경도가 다른 실험군에 비해 유의적으로 높게 나타났다. 유리아미노산 총량은 CD 구가 가장 높았고 D 구가 가장 낮았으며, 필수아미노산의 비율은 소금의 종류에 따른 큰 차이를 보이지 않았지만, 비필수아미노산의 비율은 해양심층수염으로 제조 된 시판제품이 가장 높았다. 유기산 총량은 CD 구가 가장 높았고 해양심층수염으로 제조한 D와 정제염으로 제조한 R 구가 가장 낮았다. 무기질 총함량의 경우에도 CD 구가 실험군 중 가장 높았고, D, S, R, CR, CS 순으로 낮게 나타났다. K와 Mg 함량은 해양심층수염으로 제조한 D 구가 실험군 중 가장 높았고, Na 함량은 CD구가 가장 높았다. 관능적 외관, 산미 및 전체적 기호도는 모든 실험군에서 저장기간이 경과함에 따라 감소하였으나 해양심층수염으로 제조한 절임배추(D)의 외관, 산미 및 전체적 기호도는 저장기간 동안 다른 실험군에 비해 유의적으로 높은 평가를 받았다. 즉, 해양심층수염으로 절임배추를 제조할 경우 천일염이나 정제염으로 절임한 배추에 비해 관능적으로 우수하고 무기질, 유기산 함량이 높은 양질의 절임배추를 제조할 수 있을 것으로 사료되었다.

활성슬러지 공정을 위한 모델링과 지능제어의 적용 (Modeling and Intelligent Control for Activated Sludge Process)

  • 천성표;김봉철;김성신;김창원;김상현;우혜진
    • 대한환경공학회지
    • /
    • 제22권10호
    • /
    • pp.1905-1919
    • /
    • 2000
  • 활성슬러지 공정에 기반을 둔 연속식반응기는 시스템이 가진 고유한 비선형성뿐만 아니라 계절, 기후 등의 환경변화에 따른 유입수의 유량 및 특성 등의 외부적인 조건의 변화를 고려하여 제어하여야 한다. 수학적 모델링 과정에서 고려하지 못했거나 무시되었던 부분을 포함한 시스템에 관련된 특징과 한정된 공간에서 기본적인 제어방법에 의한 현재의 운전방법을 고려하여 불 때 활성슬러지 공정은 개선할 수 있는 여지가 많다. 또한 숙련된 운전자의 지식을 구현할 수 있는 지능제어기법을 적용하여 전체적인 공정의 효율 향상을 도모할 수 있다. 제어방법의 적용에 앞서 제어대상공정인 활성슬러지 공정을 분석하여 이를 $Matlab^{(R)}5.3/Simulink^{(R)}3.0$을 이용하여 연속식반응기 모델을 구현하였다. IWA(International Water Association)와 COST(European Cooperation in the field of Scientific and Technical Research)에서 제시한 정상상태의 유입수 특성을 이용하여 모델의 정확성을 검증하였다. 본 논문에서는 이미 현장에서 사용중인 제어기법의 구현 및 성능 평가뿐만 아니라 다양한 고급제어기법들을 적용하여 새롭게 제안한 제어기법들이 실제 폐수처리장에 적용가능한지 여부를 검증하였다. 제어방법으로는 현장에서 일반적으로 사용되고 있는 비례-적분-미분제어기(Proportional-Integral-Derivative Controller; PID controller)와 PID제어기가 가진 장점과 퍼지 논리 제어기법이 가진 장점을 결합함과 동시에 제어기의 성능 향상 및 경제성을 높일 수 있는 퍼지 PID이득 조절기(fuzzy PID gain tuner)와 퍼지 셋포인트 변환기(fuzzy setpoint changer)를 적용하여 봄으로써 외란에 대해 강인한 제어기 설계의 가능성을 검증하였다.

  • PDF

윤환관개의 방법의 차이가 수도생육 및 수량에 미치는 영향과 그 적정시설에 관한 연구 (Studies on the Effects of Variation Methods of Rotation Irrigation Systems Affecting on the Growth, Yield of Rice Plant and its Optimum Facilities)

  • 이창구
    • 기술사
    • /
    • 제2권5호
    • /
    • pp.4-18
    • /
    • 1969
  • This experiment was conducted, making use of the "NONG-RlM 6", a recommended variety of rice for year of 1968. Main purposes of the experiment are to explore possibilities of: a) ways and means of saving irrigation water and, b) overcoming drought at the same time so that an increased yield in rice could be resulted in. Specifically, it was tried to determine the effects of the circulation irrigation method combined with differentiated thickness of lining upon the growth and yield of rice. Some of the major findings are summarized in the following. 1) The different thicknesses show a significant relationship with the weight of 1,000 grains. In the case of 9cm-lined plot, the grain weight is 23.5 grams, the heaviest. Next in order are 3cm-lined plot, 6cm-lined plot, control plot, and wheat straw lined-plot. 2) In rice yield, it is found that there is a considerably moderate significant relationship with both the different thickness of lining and the number of irrigation, as shown in the table. 3) There is little or no difference among different plots in terms of a) physical and chemical properties of solid, b) quality of irrigation water, c) climatic conditions, and rainfalls. 4) It is found that there is a significant relationship between differences in the method of rotation irrigation and the number of ears per hill. The plot irrigated at an interval of 7 days shows 17.4 ears and the plot irrigated at an interval of 6 days, 16.3. 5) In vinyl-treated plots, it is shown that both yield and component element are greatest in the case of the plot with hole of 3$cm/m^2$. Next in order are; the plot with a hole of 2$cm/m^2$; the plot with a hole of 1$cm/m^2$. In the case of the plot with no hole, it is found that both yield and component elements are decreased as compared to the control plot. 6) The irrigation water requirement is measured for the actual irrigation days of 72 which are the number subtracted the days of rainfall of 30 from the total irrigation days of 102. It is found that the irrigation water requirement for the un control plot is 1,590 mm, as compared to 876 mm (44.9% saved) for the 9cm-lined plot, 959mm(39.7% saved) for the 6cm-lined plot, 1,010mm (36% saved) for the 3cm-lined plot, and 1,082mm (32% saved) for the wheat straw lined plot. In the case of the rotation irrigation method, it is found that the water requirement for the plot irrigated at an interval of 8 days is 538mm (65.3% saved), as compared to 617mm (61.1% saved) for the plot irrigated at an interval of 7 days, 672mm (57.7% saved) for the plot irrigated at an interval of 6 days, 746mm (53.0% saved) for the plot irrigated at an interval of 5 days, 890mm (44.0% saved) for to plot irrigated at an interval of 4 days, and 975mm (38.6% saved) for the plot irrigated at an interval of 3 days. 7) The rate of evapo-transpiration is found 2.8 around the end of the month of July, as compared to 2.6 at the begining of August, 3.4 around the end of August, and 2.6 at the begining of September. 8) It is found that the saturaton quantity of 30 mm per day is decreased to 20mm per day through the use of vinyl covering. 9) The husking rate shows 75 per cent which is considered better.

  • PDF