• 한국산업보건학회지
• /
• 제9권2호
• /
• pp.32-51
• /
• 1999

The purposes of this study were to review current status and problems of national qualification sys tem in the field of industrial hygiene, focusing on the deficiencies in the regulatory system and the quality of individual professionals including the Industrial Hygiene Management Professional Engineer and the Industrial Hygiene Management Engineer, and to suggest new directions for the industrial hygiene qualification system. In addition, comparable systems adopted in other countires were reviewed.

• 한국품질경영학회:학술대회논문집
• /
• 한국품질경영학회 1998년도 The 12th Asia Quality Management Symposium* Total Quality Management for Restoring Competitiveness
• /
• pp.339-344
• /
• 1998

Since 1997, JAB (The Japan Accreditation Board for Conformity Assessment) had started the activity of accreditation for the laboratory based on U.S. PL101-592: the Fastener Quality Act that was signed by President Bush on 1990. The number of accredit laboratories are 69 in Japan, 21 in Taiwan, 2 in Korea and 189 in U. S. A, as of 09/10/1998. The JAB accreditation encompasses the requirements of the ISO/IEC Guide 25, and the relevant requirements of ISO 9002. The purpose of ISO/IEC Guide 25, also had been harmonized as JIS Z 9325 'General requirements for the competence of calibration and testing laboratories 'mainly facilitates and promotes acceptance of calibration and test results between countries to avoid barriers to trade through as 'one stop testing'. The features and differences between Guide 25 and ISO 9000 will be clarify in this report.

• 한국건설관리학회논문집
• /
• 제17권6호
• /
• pp.31-39
• /
• 2016

본 논문은 S대학교 대학원에서 수행하고 있는 '글로벌 건설 엔지지어링 고급인력 양성 사업'에 대한 중요도-만족도 분석을 실시하고 이를 토대로 교육프로그램의 효과성을 제고하는 방안을 제안하는 것을 목적으로 한다. 최근 해외건설시장은 매년 증가 추세를 보이고 있으며, 특히 사업타당성 분석 등과 같이 부가가치가 높은 사업의 기획단계에서의 역량강화가 강조되고 있다. 하지만 국내 시공 및 엔지니어링사들의 고부가가치분야의 역량은 여전히 부족한 것으로 평가되고 있다. 이를 극복하기 위해 국토교통부는 해외 건설시장에 필요한 역량인 기획, 관리, 금융, 설계 등 고부가가치분야 역량을 갖춘 전문가 양성을 목적으로 '글로벌 건설 엔지니어링 고급인력 양성' 사업을 시작하였다. 이에 2014년 특성화 대학원 2곳(S대학교, C대학교)을 선정하여 인력양성을 사업을 수행하고 있다. 위 사업의 목적인 해외건설 시장에서 글로벌 경쟁력을 갖추고 질적으로 우수한 고부가가치분야 전문가를 양성하기 위해서, 지속적으로 교육프로그램의 만족도 분석이 실시되어야 한다. 본 논문에서는 중요도-만족도 분석(Importance Satisfaction Analysis, ISA)을 통하여 인력양성 프로그램 대상자들의 소요를 효과적으로 파악하고, 도출된 개선안을 통해 '글로벌 건설 엔지니어링 고급인력 양성 프로그램'의 만족도를 제고할 수 있을 것으로 기대된다.

• 기술사
• /
• 제15권3호
• /
• pp.49-60
• /
• 1982

In Korea small-medium companies constitute 96.7% of all of the mining and manufacturing industries, about 34.2% of the total production of value added business, an average of 34.8% of #he actual export of industrial goods, and 49.4% of employment at the end of 1980. Now then small-medium industry companies organization style constitutes 82.1% of private companies and 82.7% of the total on an small scale under 49 persons in regular empolyees. Small-medium industry Companies have growing problems and bottle-necks in their physical conditions. Total Quality Control is contributed by small-medium industry company for more growth than present conditions. But now, Small-medium industry company do not use systematic application of Quality Control Method, the small-medium business company products quality is not better as compared with big business company. Specially, TQC is needed for Small-medium company for imperishable enlargement . In order to promote good will and the major stress of this paper is first of all on the problems of Quality Control, which covers the present states and derived problems of Quality Control, ill Korea Small-medium industry Companies. These are investigated and analyzed to insure the rational application of Quality Control to the Small-medium companies with a view of the establishment of the direction and systematic improving means of Quality Control application Model building for Korea Small-medium industry.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1650-1658
• /
• 2011

The quality control of compaction fills has been commonly performed via the field density measurement and plate load tests. However, the engineer frequently encounters difficulties in actually controling the quality due to the uncertainty in the field density measurement as well as the plate load tests. To overcome these difficulties, Park et al. (2009) proposed an alternative quality control method based on the measurement of the compressive wave velocities. In this study, the compressive wave velocities measured in the full-scale model test site were analyzed. Direct arrive seismic tests were performed after the completion of each trackbed layer. To identify a relationship between elastic wave velocities and degree of compaction, laboratory compaction tests were conducted.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.342-346
• /
• 2003

Present CDMA technology is development continuously to internet technology and new communication infra called internet construction for quality of high quality offer the changing existent existence. wireless data communication area. In the meantime, our country is tunnel of whole country over 500 by special quality that is photograph because Safety diagnosis consists to manage preservation administration is in dangerous state about safety. Domestic telemeter technology is real condition that is depending on expensive foreign goods and engineer to improve that. Therefore tunnel preservationㆍadministration more improved telemeter system develop wish to this research uses CDMA net.

• 기술사
• /
• 제42권4호
• /
• pp.40-44
• /
• 2009

The analysis of air quality model applied for EIA in Korea indicates that ISCST3 and CALINE3 dominate the model, and it causes the problem that regional and business characteristics are not taken into account. To solve this problem, it appears necessary to build guideline of the air quality model operation. First of all, to implement the above plan we need to categorize the site into simple and complex terrain, coast to consider regional characteristics, and the sources of pollutants into point/area/line as well. To make the procedure more efficient with reduced time and less cost, we are to apply screening model for prelimninary work of the suggested model.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.948-957
• /
• 2003

금형산업은 ETO(engineer to order)방식의 산업으로서 각 주문마다 견적가를 책정하는 것이 손익에 큰 영향을 미치게 된다. 현재, 대부분의 금형업체에서는 금형주문에 대한 견적을 금형전문가의 개별적인 지식에 의존하고 있는데 이러한 방식은 주관적이며, 체계적이지 못한 문제점을 갖고 있다. 따라서 보다 합리적이고 체계적인 기준에 의한 견적가 결정 방법이 필요하다. 본 연구에서는 먼저 고객의 요구사항을 QFD(Quality Function Deployment)를 사용함으로써 금형제작에 있어서 원가에 영향을 미치는 요소를 추줄하게 된다. 이렇게 얻어진 금형제작 정보와 고객의 주문정보를 바탕으로 인공신경망, 사례기반주론 등의 인공지능 기법을 사용하여, 사출금형의 견적가를 책정하는 사출금형의 견적지원시스템을 개발하고자 한다.

• Journal of the Korean Data and Information Science Society
• /
• 제24권4호
• /
• pp.919-929
• /
• 2013

We compared two basic methods, combine-accumulate method and accumulate-combine method, using the past quality information in multivariate quality control procedure for monitoring mean vector of multivariate normal process. When small or moderate shifts have occurred, accumulate-combine method yields smaller average run length (ARL) and average time to signal (ATS) than combine-accumulate method. On the other hand, we have found from our numerical results that combine-accumulate method has better performances in terms of switching behavior than accumulate-combine method. In industry, a quality engineer could select one of the two method under the comprehensive consideration about the required time to signal, switching behavior, and other physical factors in the production process.

• 기술사
• /
• 제32권6호
• /
• pp.55-59
• /
• 1999

It is very important moments to look revolutionary changes on the whole industries in the upcoming new millennium. Traditionally, packaging was differentiated from design, production, and quality test in improving productivity. Therefore packaging concept should be updated as the time changes. For the productivity improvement, Packaging should be regarded as the value added goods and changed with leading edge technologies to meet various market needs due to its complex faces based on econo-environmental nature.