• Journal of Environmental Science International
• /
• v.26 no.11
• /
• pp.1209-1222
• /
• 2017

On June 5, 2008, the "Act on Special Cases Concerning the Simplification of Authorization and Permission Procedures for Industrial Complexes" (Act No. 9106) was enacted. When it was implemented in August 2008, many industrial complex development projects were established, and the number of industrial complexes growth rates of 3-6% during 2003-2007 rose to around 15% in 2008. With the increase in industrial complexes, the environmental impacts of individual projects were examined, but comprehensive regional reviews of environmental impacts were not undertaken. In this study, we determined changes in air quality by applying the industrial complex development plan that completed the consultation at the end of 2010 to assess the comprehensive regional environmental impacts and presented the adequacy review plan for future industrial development plans based on the study's results. When considering these industrial complex development plans, emissions in North Jeolla and South Chungcheong Provinces and Daegu City have increased significantly. Air quality analyses showed that the 24 h mean $SO_2$ concentration in Daegu increased by more than 50% in summer compared to air quality concentrations in summer. The 24 h mean $PM_{10}$ and $NO_2$ concentrations increased by approximately 12 and 30%, respectively, in North Jeolla Province in summer. Areas exceeding the air quality standard for 1 h mean $O_3$ concentration increased by more than $3,500km^2$. Based on the above analysis, changes in air quality should be anticipated through a comprehensive evaluation of long-term development plans. Furthermore, control of air quality in accordance with the development of future industrial complexes is possible.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2002.11a
• /
• pp.295-300
• /
• 2002

Since the contents of large-scale repair of a condominium were various, a plan document was not prepared. The owners association of the condominium has given priority to decision-making of price priority over quality. Examination is not performed about the contents of the construction supervision business, which checks whether suitable construction is performed, either. On the other hand, the know-how for builders, such as decision of the process plan under which the repair work lessens influence to the safety and life as much as possible since the place where the resident is living turns into a construction site, and selection of a method of construction, is just going to ask. It is an important subject how the structure of the construction contractor selection, which considered quality, is built. Then, this research focuses on large-scale repair construction of the condominium, and arranges the actual condition of a series of processes from plan document creation to construction supervision. The method of research collects the construction documents of the condominium that carried out Barge-scale repair construction. Next, collection arrangement of the data of construction builder selection is carried out. The method of the construction builder selection of those other than a construction price is examined. The method of quality control of large-scale repair construction is examined.

• Journal of the Korea Institute of Building Construction
• /
• v.8 no.2
• /
• pp.121-129
• /
• 2008

Domestic exoteric construction market by opening of world construction market with recent FTA of rapidly change. On these time, need quality increase of construction to possess government official and international competitiveness of customer satisfaction by offering consumer building of good quality. Therefore, must establish direction to inspects and must advance forward formation government official's present actual conditions for building company's QI. This study is as following if summarize studying result of formation government official to improve quality in construction spot. First, formation's CEO will for QI need side improvement the formation government official enemy by important thing. Second, at checking activity and systematic action that participate of responsible persons cooperation enterprise space-time by complete charge department organization should be achieved. Third, complete charge department for quality control operation large size construction firm substantially formation Organizational well operate, but heavy hydrogen building company was construed by greatly unprepared misgovernment. AHP analysis result complete charge department is serious necessity, and the CEO under direct control organizational structure was construed by thing which can bring excellent effect in operation management side of quality business side and formation. Therefore, heavy hydrogen building company should does to occupy competitive power high position with tissue at active quality complete charge deputy.

• Journal of KIBIM
• /
• v.4 no.2
• /
• pp.10-16
• /
• 2014

Interoperability in the BIM construction information is the information management technology, which allows user to control and effectively use construction's lots of information that occur and disappear through construction life cycle. And it is information interchange through accurate and rapid decision-making to get the participants' wanted value. In this study, we will present plan to improve productivity and quality through effective BIM operation. And we will present improvement plan after deduce existing process's problem.

• Journal of Environmental Health Sciences
• /
• v.35 no.5
• /
• pp.365-375
• /
• 2009

Agriculture reservoirs need a systematic approach that can control water purity and water improvement. The area under study, Bunam Lake exceeds the agricultural water standard level due to contamination from the upper stream. When the Taean Enterprise City was planned, the water quality improvement plan was applied to minimize the environmental change. However, in order to continuously maintain the water quality in the Bunam Lake, it was essential to apply the Total Pollution Load Management System (TPLMs). In order to achieve the targeted water quality in the Bunam Lake, standard flow rates and targeted water quality levels were applied to obtain the loading capacity which is as follows : BOD 1,891.2 kg/d, T-N 1,945.7 kg/d, T-P 131.7 kg/d. Also, the regional development load was calculated as, BOD 1,083.6 kg/d, T-N 942.2 kg/d, T-P 61.8 kg/d, which is required to be deceased :- by BOD 378.4 kg/d, T-N 198.9 kg/d, T-P 31.6 kg/d in order to safely achieve the targeted water quality in the Bunam Lake.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2002.03a
• /
• pp.127-132
• /
• 2002

While the pavement design is based on mechanical property such dynamic elastic modulus, the quality of highway subgrade during construction is controled by the optimum moisture content(OMC) and maximum dry density(${\gamma}$$\_$dmax/). However, since the quality control based on the OMC and maximum dry density does not consider the mechanical characteristics, there is a conceptional gap between design and PMS(pavement management system). Therefore, it is necessary to develope a new qualify control system using mechanical property for highway construction in more rational way. To achieve this goal, it is planned to perform various laboratory tests to collect mechanical properties of subgrade soil samples from several highway construction sites and to propose the relationship between dry unit weight (or OMC) and mechanical parameters. In this paper, the experimental data so far obtained are presented and analyzed. In addition, further research plan is presented and discussed.

• Asian Journal of Atmospheric Environment
• /
• v.11 no.1
• /
• pp.33-36
• /
• 2017

China is suffering from severe air pollution especially fine $PM_{2.5}$ pollution. In 2015, the annual average $PM_{2.5}$ concentration of the 338 municipal cities was $50{\mu}g/m^3$, 78% cities at or above the prefectural level failed to comply with the $PM_{2.5}$ concentration standards. The $13^{th}$ Five-Year Plan for National Economic and Social Development set the goal that the annual average concentration of $PM_{2.5}$ in the municipal cities which failed to attain the ambient air quality standards shall be decreased by 18% by 2020 (CCCPC, 2016). In this study, an air pollution control scenario during the $13^{th}$ Five-Year Plan period was proposed and the $SO_2$, $NO_x$ and PM emission reductions in response to different measures in 31 provincial-level regions mainland China by 2020 were estimated. The air quality in the target year (2020) was simulated using the WRF-CMAQ model. The results showed that by 2020, the emissions of $SO_2$, $NO_x$ and primary PM in mainland China will be reduced by 4.19 million tons, 3.94 million tons and 4.41 million tons, a drop of 23%, 21% and 25% respectively compared with that in 2015, and the annual average concentration of $PM_{2.5}$ will decrease by 19%. Coal-fired power plant contributes the most pollutant emission reduction.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.115-121
• /
• 2015

This paper presents the introduction plan of the renewable energy in innovation city. The introduction plan to make the condition of innovation city best should consider the economical efficiency, the quality of life and the sustainable development. The design of balanced city is demanded to build environment friendly and sustainable city. Energy efficient buildings should be designed to deal with the energy efficiency and environment problem. Therefore, in this paper, we analyze the energy efficiency and provide the method to introduce the renewable energy system, in various buildings. As a result, the renewable energy plans of each innovation city are suggested and analyzed.

• Journal of Korea Society of Industrial Information Systems
• /
• v.8 no.1
• /
• pp.1-8
• /
• 2003

There are many statistical evaluation methods, A more technical Perspective is needed in estimating the effect of the Manufacturing Process for improving the Productivity, Process network analysis is a technique which has the potentiality for a wire use to improve the manufacturing process which other techniques can't be used to analyze effectively. The concept of six sigma plan was developed and pursued by Motorola to improve the process control. The goals of six sigma plan are established on the foundation of customer satisfaction such as Quality, Cost Delivery and Service This paper presents how to improve the manufacturing process by statistical process control for the evaluation of six sigma level.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.357-360
• /
• 2003

Improvement is required to solve problems depending on long term use of signal equipment in the existing city railroad and to raise quality of passenger services. Accordingly, for more efficient improvement, we examined the procedure of executing construction of the communication based train control system in Korean city railroads, which is globally studied. The procedure of executing construction of the system is to present a plan for construction first of ail and then to prepare a strategy for construction of the system. It is required to establish a procedure for execution in each step depending on the prepared strategy and then to establish a detailed execution plan. We studied such an execution procedure, divided the execution procedure for application of the train control system through five steps to prepare the execution procedure.