• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2369-2374
• /
• 2008

In the precision hot plate for wafer processing, the temperature uniformity of upper plate surface is one of the key factors affecting the quality of wafers. Precision hot plates require temperature variations less than ${\pm}1.5%$ during heating to $120^{\circ}C$. In this study, we have manufactured the flat plate heat pipe hot chuck of circle type(300mm) and investigated the operating characteristics of flat plate heat pipe hot chuck experimentally. Various liquids(aceton, FC-40, water) were used as the working fluid and charging ratio was changed($14{\sim}36\;vol.%$). Several cases were tested to improve temperature uniformity. Major working fluid to be investigated was water. Using water, various parameters such as charging ratio, wafer operation on-off time, different working fluids. In case of water, the temperature uniformity was ${\pm}1.5%$, response time of wafer were investigated.

• Journal of Yeungnam Medical Science
• /
• 제38권4호
• /
• pp.282-288
• /
• 2021

Medication alone is not sufficient to treat insomnia. In addition, the side effects of sleep medications themselves cannot be ignored during treatment. Insomnia begins with poor sleep quality and discomfort, but as it continues, patients fall into a vicious circle of insomnia with negative thoughts and dysfunctional and distorted perceptions related to sleep. Mindfulness-based intervention for insomnia corrects these sequential cognitive and behavioral processes. The mindfulness technique basically recognizes all the thoughts, feelings, and experiences that occur to us as they are, nonjudgmentally, and then trains them to return to the senses of our body. In this way, while noticing all the processes of the sequential vicious cycle and training them to return to our bodies (e.g., breathing), mindfulness determines whether we are really sleepy or just fatigued. This mindfulness-based intervention can be a useful nonpharmaceutical intervention for insomnia, and its stability and efficacy has been proven by many studies.

• 유통과학연구
• /
• 제11권6호
• /
• pp.81-89
• /
• 2013

Purpose - The market orientation of a manufacturer is a very critical competitive advantage factor in the development of new markets and the sustainability and maintenance of existing ones, achieved through the design of customer-oriented products. This is recognized as a virtuous circle, in which firms grow by means of promoting quality management. However, though market-oriented activities are important in management and operations, they seem to be promoted mainly by large-scale enterprises rather than by small- and medium-scale firms, the latter having invested relatively few company resources. Furthermore, few studies and analyses have examined how market orientation relates to the expansion of quality programs within organizations or with business performance; the market orientation and customer-orientation concepts are mixed together when both are used in research. Given the current market situation in which the servitization of manufacturing firms is rapidly expanding, this study's analysis of the effect on market orientation of manufacturers is a significant contribution. From this perspective, this study has several objectives. First, is to analyze and suggest the relationship between market orientation and quality management activity for manufacturers, focusing on three sub-activities: products, process, and quality management activities. Second, it is intended to identify correlation between manufacturers' market oriented activity and their management performance and then to analyze how market orientation affects business performance. The results of a number of prior studies on the correlation between market orientation and management performance have indicated that market orientation does affect management performance. Third, this study also investigates whether any differences in the relationship among market orientation, quality management activity and business performance occur according to company size. The results are used to present operational suggestions for large- and small- and medium-size firms. Research design, data, methodology - This study seeks to analyze and identify the causal features of the organic relationship among market orientation, quality management, and management performance for Korean manufacturing companies using three years (2005-2007) of market orientation, quality management, and business performance data. Subsequently, structural equation modeling was used to analyze the causal features of related factors and it aims to identify the features of market orientation, quality management, and business performance. Results - The analysis examined how market orientation affected the quality management and management performance of 159 smalland medium-size companies. In particular, enterprise quality management was analyzed in relation to management performance with a focus on activities such as leadership, measurement and improvement, quality control, cost management, and process management. Conclusions - The result of the analysis show that market orientation significantly affected all of the quality management activities and that market orientation in turn significantly affected organizational performance. The result of analysis indicate that quality management activities have a significant effect on quality control and cost management.

• 대한안전경영과학회지
• /
• 제17권2호
• /
• pp.215-228
• /
• 2015

A creative innovation and an innovative problem-solving of industrial companies can be achieved by overcoming the challenges of technical and physical contradictions. The approaches to address conflicting and paradoxical problems, such as technical and physical contradictions have a crucial role in advancing the quality assessment for manufacturer and service provider. The term, technical contradiction, depicts the state that improvement of one ends of IFR (Ideal Final Result) leads to unfavorable condition of the other ends, and results in conflicting problem. Another type of contradictions that's discussed in this study is a physical contradiction which is due to two mutually opposing states of the means of ends, and gives paradoxical situation. By integrating the means-ends chain perspectives, the physical contradiction that is a specifically root-causes, "means", can be initially addressed to resolve the downstream problem of technical contradiction which represents a general and abstract goals, "ends". This research suggests IFR resolution processes to handle both physical contradiction of means and technical contradiction of ends by employing causal relationship with IFR, effects and causes. In summary, the study represents three major processes that resolve such contradictions are demonstrated as follows: 1) Derivation of causal and hierarchical relationship among IFR, ends and means by considering CAED (Cause-And-Effect Diagram) and LT (Logic Tree). 2) Identification of causal relationship between physical contradiction and technical contradiction by using TPCT (TRIZ Physical Contradiction Tree) and TCD (Technical Contradiction Diagram). 3) Application of integrated TRIZ principles by classifying 40 inventive principles into 4 general conditions of the separation principle of mutually opposite states in space, in time, based on conditions, and between the parts and the whole. In order to validate the proof of proposed IFR resolution processes, the analysis of the TRIZ case studies from National Quality Circle Contest in the years, 2011 to 2014 have been proposed. The suggested guidelines that are built based on TRIZ principles can uniquely enhance the process of quality innovation and assessment for quality practitioners.

• 한국초지조사료학회지
• /
• 제15권4호
• /
• pp.303-309
• /
• 1995

An experiment was camed out in 1994 to determine the effects of curing periods and preservatives on the characteristics and forage quality of baled alfalfa(Medicago sativa L.) hay after 60 days of storage. The main plots consisted of the curing periods such as 5 and 7 days, and the subplots consisted of preservatives such as commercial propionic acid preservative, lactic inoculant and control. Temperature during storage remained lower in 7 days cured hay bale than in 5 days and didn't rise over $30^{\circle}C$ in 7 days cured hay bale. After storage, bale with 7 days curing remained in better condition by visual assessment and DM loss of the bale was 21.4% with 5 days curing and 11.8% with 7 days curing. ADF and NDF contents of 5 days cured baled hay were 43.0 and 56.1%. respectively, which were lower than those of 7 days cured baled hay by 1.3 and 1.4%, respectively(P< 0.05). ADF and NDF contents of preservative treated baled hay were higher than those of the control(P<0.05). According to RFV, forage quality of the control and inoculant treated baled hay of 5 days curing, and the control of 7 days curing was classified as 3rd grade, but other baled hay was classified as 4th grade. The total nitrogen content of 5 days cured baled hay was 1.84% and 7 days was 1.38%(P<0.05). Significant differences(P<0.05) in total N content of baled alfalfa hay were found among the preservatives. ADIN/total N of 5 and 7 days cured baled alfalfa hays was 28 and 26%. respectively.

• Journal of the Korean Wood Science and Technology
• /
• 제31권2호
• /
• pp.16-23
• /
• 2003

간벌이 국산 잣나무 조림목의 용재품질에 미치는 영향을 구명함으로써 잣나무 인공조림목의 양질재 생산과 효율적 이용을 위한 기초자료를 제공하고자 수행된 본 연구에서 다음과 같은 결과를 얻었다. 강도의 간벌을 실시한 곳에서는 원목의 단위 m당 표면옹이 출현수가 감소하였고, 죽은 옹이의 비율도 감소하였으나 옹이의 크기는 커졌으며, 옹이의 상향각은 죽은옹이가 산옹이보다 컸다. 굽은 원목은 간벌을 하지 않은 곳보다 강도간벌을 실시한 곳에서 적게 출현하였고, 원주형질률은 강도간벌을 실시한 곳에서 높게 나타났으며 지상고 3.2 m 이하 부위의 원목에서 더욱 향상되었다. 무결점재면률은 무간벌구에 비해 강도간벌구에서 향상되었으며, 원목품등은 간벌을 강하게 실시한 경우일수록 높게 나타났다.

• 한국항해항만학회지
• /
• 제29권7호
• /
• pp.595-601
• /
• 2005

The IMO manoeuvrability standard was established for preventing sea accidents such as collisions and strandings due to the lack of manoeuvrability. The standard of ship manoeuvrability enforced by resolution MSC.l37(76) has been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless of the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standard is able to be divided into three kinds as followings; (1) Turning capability standard: Estimated values in design stage are to be certified by turning circle test of the actual vessel. (2) Course keeping quality standard : Estimated values in design stage are to be certified by 10 deg. and 20 deg. zig-zag tests of the actual vessel. (3) Shortest stopping distance standard : Estimated value in design stage is to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors verified the criteria of IMO manoeuvrability standard comparing them with the values resulted from sea trial tests of various kinds of actual vessels and examined separately the validity of all criteria of the standard.

• 기술혁신연구
• /
• 제9권1호
• /
• pp.149-165
• /
• 2001

This paper analyses characteristics of the numerical controller industry in market formation and the flow of information between users and producers and the characteristic of knowledge base of the industry and discuses the difficulties derived, from the characteristics, in accumulation of technological capability. In market formation between users and producers, the multi-layered market is not favorable to domestic producers in that lower end market is not large enough to provide cradle market to them which produce inferior quality and lower price than imported products. The credibility of the performance of a product is different to prove until a critical mass of products are sold. Therefore gaining market share is deterred by unproven credibility of the performance of the product. The flow of information between users and producers is limited. The flow of information on users environment through mass market to producers is essential for improving credibility of a product. The nature of knowledge base is tacit and the means of knowledge transmission is limited. Technological licensing and reverse engineering, which have been conventional means of knowledge transmission, are not useful in the numerical controller industry. These characteristics provide conditions of vicious circle in accumulation of technological capability of the numerical controller industry. This paper argues that these characteristics of the industry challenge existing approach to R&D management and framework of science and technology policy.

• 한국의류산업학회지
• /
• 제17권4호
• /
• pp.513-523
• /
• 2015

The purpose of this study is to develop house caddie uniforms design which reflects the CI and image of 'Golfzon County Sunwoon', a representative golf course in the Honam circle, to enhance a positive image of a golf course and improve house caddies' service quality and their working efficiency. Study methods were as follows. In literature review, the domestic golf industry, golf culture, and house caddie uniforms as one of golf course CI elements were investigated. In empirical study, the formativeness of domestic golf course CI and house caddie uniforms was analyzed. Then, house caddie uniforms were developed using CI which is the symbolic element of a golf course. A concept for uniforms design development was 'Golf & Culture Communication' to symbolically represent an image of IT-based total golf culture club. It was limited to female uniforms design for spring or autumn that is high in application. A symbol and a logo which are symbolic elements of a golf course were freely worn in the form of a brooch. Symbolism and practicality were reinforced using PB(v), R(v), YR(v), and Y(vp) colors only for a golf course. Functionality was improved by using UV protection materials and aesthetics was expressed by reflecting 2014-15 F/W trends.

• 한국안전학회지
• /
• 제17권1호
• /
• pp.11-17
• /
• 2002

The purpose of this study was to present the method to choose the optimization machining condition for the wire electric machine. This was completed by examining the ever-changing quality of the material and by improving the function of the wire electric discharge machine. Precision metal mold products and the unmanned wire electric discharge machining system were used and then applied in industrial fields. This experiment uses the wire electric discharge machine with brass wire electrode of 0.25mm. To measure the precision of the machining surface, average values are obtained from 3 samples of measures of center-line average roughness by using a third dimension gauge and a stylus surface roughness gauge. In this experiment, we changed no-node voltage to 7 and 9, pulse-on-time to $6{\mu}s,\;8{\mu}s$ and $10{\mu}s$, pulse-off-time to $8{\mu}s,\;10{\mu}s$ and $13{\mu}s$, and experimented on wire tension at room temperature by 1000gf, 1200gf, and 1400gf, respectively.