• Design & Manufacturing
• /
• v.13 no.4
• /
• pp.51-56
• /
• 2019

Due to industrial development, the importance of GD&T tolerance is growing day by day. Roundness measurement means the size deviated from the ideal circle. Roundness evaluation methods include LSCI, MZCI, MCCI, and MICI. Generally, A is used a lot at industrial evaluation. In this experiment, we studied the variations in table velocity, filter values, and detector angles, which can cause errors in roundness measurements. The measurement conditions were table speeds of 10, 30 and 60 mm/s, probe angles of 10, 20 and 30 degrees and frequency filter settings of 15, 150 and 500 upr and The number of experiments was measured 30 and the average value was chosen as a representative value. The hypothesis test showed that the p-value for the frequency filter was greater than 0.05, and the experiment rejected the null hypothesis and adopted the alternative hypothesis.

• Journal of Korean Society for Quality Management
• /
• v.19 no.1
• /
• pp.115-128
• /
• 1991

In korea, since November 1982 these two small group actvity convension (QC circle convension and Factory Saemaul activity small group convension) has been united, many problem have been disclosed that are against the basic principle more or less. Worker's small group activity is essentially, a trouble shooting oriented voluntary small group within their working place to improve the surroundings creatively. In practice. however, many group are so typical and so impetuous of the material effect that it is worried to be inclined to outform rather than contents. Effective small group activities are presumed to be successful only with labor management cooperation on the basis of human-orient management philosophy. The small group activities are also prevalent in service sector. More derivative methods have been developed and more members are willingly participating in training programs. The small group which is basically a horizontal organization unit, promptes communication within the whole organization. In consideration of the social circumstances and traditions, the flexible model of the small group activities suitable to the corporate environment, will contribute industrial development.

• Journal of Korean Society for Atmospheric Environment
• /
• v.13 no.2
• /
• pp.115-122
• /
• 1997

Diurnal variation of $PM_{10}$ concentration was investigated for 24 sites in library including reading room, bookstock room, lobby, office and so on, and 9 sites in student building at Kangwon National University using scattering light integrated type digital dust indicator. The dimensional conversion factors for mass concentrations (K) were determined by comparing between the $PM_{10}$ concentrations collected by $PM_{10}$ hig volume air sampler and the digital dust indicator. The dimensional conversion factor (K) was 3.33 for indoor air in this experiment. The highest concentrations were 649 $\mug/m^3$/day for smoking room in the library and 242 $\mug/m^3$/day for circle room in the student building. Most of spaces in the library except a office and bookstock rooms were over 150 $\mug/m^3$/day of $PM_{10}$ concentrations and 6 indoor spaces were over the guideline for indoor air quality in student building except a health center and two restaurants. Therefore, it should be required to make an improvement on the indoor air quaility for public facilities in the university buildings.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.8
• /
• pp.25-30
• /
• 2018

In this paper, we design a 2D one touch runner game which controls on smart device easily using a Unity3D game engine. Unity is the creator of the world's widely-used 2D and the 3D cross-platform game engine developed by Unity Technologies. Also, Unity builds high-quality 2D and 3D games on a various hardware device. This paper shows the familiar character as a cartoon and feels to enjoy using platformer with various game users. we show that the proposed platformer method improve controlling game path on the smart device.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1390-1393
• /
• 2004

In the present industry, three-dimensional colored shape has required for realistic prototype in rapid manufacturing. Z-corporation developed 3D printer which can color three-dimensional prototype but this process can't be adopted to other rapid prototype products and spend much time and cost coloring 3D shape. In this study a new coloring process on three-dimensional surface is proposed for realistic prototype. Three-dimensional surface coloring apparatus is composed of HP ink jet head and X-Y plotter. Distance and angle between ink jet nozzle and 3D surface are set as process parameter. Based on the experiment of process parameters, it is shown that distance and angle affected on printed image on 3D surface. Circle and line shape are chosen as standard image shape because the shape has widely used as standard in 2D printing. Consequently, the distorted image on 3D surface is corrected by transformed input image data.

• Journal of information and communication convergence engineering
• /
• v.7 no.4
• /
• pp.465-468
• /
• 2009

There is to solution the environmental data which the importance is seriously taken into consideration in the the 21st century that is set up whether or not be a welfare society advanced country according to quality of life elevations through environments in question to a preferential assignment for an environmental control will decrease of measures, and be proceeded so as to be urgent. However, shall get measurement of a correct environmental pollution duty and reduction measures stopped on bases of the data which there is reliability, and decrease excessive pollution than what, and may overcome efficiency of waste of cost environmental pollution management. Environmental pollution data collected are regarded as important, and, specially, a collection of environmental data forecast a pollution circle, or to analyze future development is important very at an environmental policy decision or decision making step to be national besides pollution reductions.

• Journal of the Korea Society of Computer and Information
• /
• v.23 no.3
• /
• pp.33-40
• /
• 2018

In this paper, we propose a method to effectively split the adjacent baggage that is moving on high speed conveyor of airport. The proposed method calculate the Angle Histogram(AH) that inspects background pixels within radius r based on the center point of the adjacent baggage. After that, the adjacent baggage is segmented by finding split angles at the AH. We also improved the split quality of adjoining baggage by repeatedly correcting the center point to correctly split adjacent baggage of asymmetric size. And the calculation time of AH is reduced about 1/3 by using the symmetry property of the circle. Experiments have shown that 93% of all adjacent baggage images are correctly segmented and the proposed method is effective.

• Korean Management Science Review
• /
• v.3
• /
• pp.37-57
• /
• 1986

Due to the gravitation of the population to Metropoleis caused by the radical industrialization and urbanization after the 1960s. most Korean cities not only have shown the deformed urban structure, but also have faced many serious problems in the public transit system. Especially, the medium-sized cities as the center of the local life have been under the low level of public transit service because of their poor transportation facilities and inefficient operations. Under these conditions, this study aims at improving its level and quality in the local midium-sized cities by performing the following; . to suggest the new idea of the public transit policies for the medium-sized cities. . to develop the Bus Transit Management System and its related computer programs. . to apply the design policies and methods to the Suwon life-circle in order to evaluate their performance.

• Journal of Korean Academy of Nursing
• /
• v.29 no.6
• /
• pp.1233-1243
• /
• 1999

This study was done to investigate the lives of the daughters- in- law caring for parents with dementia and participate in their lives through having quality time with them Data were collected by depth interviews and interpreted through the hermeneutic circle as follows. These daughters-in-law have conflict between social custom and subjective self. They had ambivalence toward their demented partents-in- law and were fighting a battle between rationality and emotions in their mind. These daughters-in law and mothers-in- law did not get along and the parents' dementia aggravated the relationships. They were alienated from their family by the parents with dementia. The indifference of their family especially their husbands, made these subjects live in misery. They cared for the demented mother-in-law with hatred. Even though they had this yoke, there daughters- in-law were not able to throw off the shackles of convention.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.355-356
• /
• 2006

This paper proposes an Molding error compensation method that improves accuracy with geometry information of injected parts using three-dimensional measuring instrument. a traditional mold design has been conducted by an experience-based trial and error, whereby generally the mold designer would decide the gate location and processing conditions. as a natural consequence, almost all creats inferior goods. It's just a process of trial and error and caught in a vicious circle. Due to this reason, this paper uses a three-dimensional measuring instrument, a commercial analysis package of injection molding(Moldflow, MPI) to analysis a state of flux. In addition to that axiomatic approach.