• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.22-28
• /
• 2019

본 연구는 차량용 보링 생산 공정에서 기계적인 에러를 체크하기 위한 품질 체크용 모니터링 시스템을 개발한다. 기계적인 에러는 이상적인 절단경로와 비교하여 실제 절단경로의 공간위치 차이에서 나타난다. 제조공정 제품의 오차를 모니터하기 위해 제품의 인지왜곡, 죄임 에러, 기계공구의 회전과 운동에러의 반경회전과 같이 보링 품질에 영향을 미치는 다수 요소들을 설명한다. 생산품질을 입증하기 위해 IT 융합에 기반한 공정 에러율을 분석하고 분석 데이터를 메모리에 저장하는 품질체크 방법을 제안한다. 따라서 불량 생산 제품을 감지함으로써, 생산 코스트와 베어링의 손실을 줄일 수 있다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제14권2호
• /
• pp.87-92
• /
• 2007

Twenty - four elite mulberry germplasm each of indigenous and exotics were studied for their leaf yield and compared with commercial check ($V_1$ and Kosen). Accession MI-0416 and ME-0169 out yielded the check accession in leaf yield/plant. The other few mulberry germplasm were also performed at par with the checks. For quality test and bioassay were conducted with the leaves of selected mulberry germplasm. Among the selected twelve mulberry accessions used for bioassay, MI-0376 and ME-033 performed better than check ($V_1$, Kosen). Other mulberry accessions i.e., MI-0310 and MI-0437 are on par with the check as far as the bioassay is concerned. MI-0376 and ME-0033 out yielded in rearing parameters and qualified for 11 and 10 rearing and related traits. Other mulberry accessions i.e., MI-0310 and MI-0437 were also qualified for eight rearing traits along with check ($V_1$). The mulberry accessions tested after selection from the preliminary characterization seems to be better and equally good in rearing and leaf yield compared to check ($V_1$, Kosen), which provides scope for selection and further evaluation. The selected mulberry accession may be included in crop improvement programme.

• 품질경영학회지
• /
• 제30권2호
• /
• pp.1-10
• /
• 2002

A performance evaluation model of an R&D module in the quality management system for M Company Is constructed using QFD. The company produces telecommunication devices and employs the performance evaluation model based on ISO 9000 family. However, the model has some problems, one of them is that all check items are regarded as equally important Customer requirements are gathered from internal customers and QFD is utilized to obtain weights for each check item.

• 지적과 국토정보
• /
• 제50권2호
• /
• pp.81-100
• /
• 2020

본 연구는 풍수해로부터 발생 가능한 피해를 추정하기 위한 공간정보 DB 활용 방안과 공간정보의 품질 점검 기준을 제안하고자 하였다. 국가재난관리정보시스템, 국가공간정보통합체계 공개자료 목록을 대상으로 공간정보 DB 중 풍수해 피해 추정을 위해 활용될 수 있는 데이터를 피해유형별로 매핑하였으며, 해당 데이터를 활용하여 피해 분석을 위한 품질 점검 기준 항목을 제안하였다. 본 연구를 통해 풍수해 피해 추정을 위한 공간정보 DB 활용이 가능할 것이며, 품질 점검 기준을 통해 분석 결과의 신뢰성을 담보할 수 있을 것이다.

• Journal of the Korean Wood Science and Technology
• /
• 제44권6호
• /
• pp.828-841
• /
• 2016

Relatively little information is available regarding the correlation between wood and veneer quality, especially for Samama wood, an endemic wood species in eastern Indonesia. This study addresses the quality of 8 years old Samama wood and its effect on the veneer quality. Samama wood quality was determined by evaluating its specific gravity, moisture content, fiber dimensions, and microfibril angle from pith toward bark. Meanwhile, veneer quality was assessed by examining veneer thickness and lathe check characteristics. Geometry factor model was constructed to elaborate the quantities of lathe check from pith toward bark. Results show that fair variations of veneer thickness, ranging from 1.5 mm to 3.0 mm, could be obtained from Samama wood. The quantity, depth, and length of lathe check were noticeably decreasing toward bark. Further, in the same manufacturing process, geometry factor was determined as the dominant factor over other wood properties in affecting the frequency of lathe checks from pith towards bark. These facts should be put into consideration in producing veneer from Samama wood. Moreover, these results enlighten the potential of Samama wood as plywood and other excellent veneer-based products.

• 한국작물학회지
• /
• 제47권
• /
• pp.200-215
• /
• 2002

There are some international standards and organization controling the quality characteristics of varieties and seeds such as UPOV, OECD, ISTA, AOSA. The National List system to check variety performance such as quality characteristics of plant varieties and seeds was established by each countries. The UPOV (International Union for the Protection of New varieties of Plant) regulates the requirement of plant variety protection that is distinctness (D), uniformity (U), stability (S) (here in after called DUS), Novelty and Denomination, and some quality characteristics are used to examine the requirement of plant variety protection by each crops. OECD (Organization for Economic Cooperation Development) seed scheme regulates the seed certification for seed trade between countries. ISTA (International Seed Testing Association) and AOSA(Association for Official Seed Analyst) regulates the seed analysis standard and methods. Most of the countries in Europe has the National List system, which check the value for cultivation and use(VCU), that is to say, variety performance such as yield, quality and stress to environment. All the seeds should be enlisted in the National List before sell the seed in their country. All the quality characteristics checked variety performance are for instance, amylose and amylopectin content in rice, molting quality, $\beta$-glucan, protein in barley, protein and sugar content in soybean, sugar and amylopectin content in corn etc. Conditions for the protection of new variety of plant are DUS. Quality characteristics may be the important characteristics and used to check DUS in crop by crop. It is very important to develop a new characteristics and establish standard method fur examine the VCU and DUS test for each crop.

• 대한디지털의료영상학회논문지
• /
• 제3권1호
• /
• pp.126-132
• /
• 1997

Purpose : To apply to Program of Auto processor quality control after comparison of Film density variations with amendments to Auto density by using Check density program and Adjust density program of calibration mode into the Laser imager. Methods : Observe Check and Adjust density variations on the Control chart with standard step and value during seven months from December, 1995 to June, 1956 extending twice a week. (1) Measure density value on the steps after printing out 17-step sensitometric pattern of the Check density program. (2) In the same way, measure density values after amending density by using Adjust density program If they are exceeding allowable error limit. Results : In case of Check density program, the exceeding limit rates of Density difference(DD) and Middle density(MD) are: FL-IM3543 DD=75%. MD=72.5%, FL-IMD DD=0%. MD=30.8%(14.5%) After amending density by using Adjust density program, the exceeding limit rates of all both Laser imager were zero percent. The standard deviations are show lower FL-IM D than FL-IM3543 on the Check density control chart, but higher on the Adjust density control chart. Conclusion : (1) Check density variations by printingout sensitometric pattern extending once a week at least for quality control of the Laser imager. (2) In case of a dusty place, check the Laser beam transmission after cleaning Laser optical unit extending once a month. (3) Be sure to measure and check density values by using adjust density program if they are exceeding allowable error limit. (4) Maintain much better film density by performing the adjust density program even if check density values are existed within normal limit.

• 한국항공운항학회지
• /
• 제30권3호
• /
• pp.54-64
• /
• 2022

Airlines have been introducing self check-in kiosks to reduce check-in time and improve operational efficacy to increase business revenue. The domestic airlines have actively provided kiosks at airports which are expected to reduce their operating costs and enrich their passengers' travel convenience. Based on the above background, the study investigates the factors influencing intention to use the self check-in kiosks by employing the Extended Technology Acceptance Model (ETAM). The study, therefore, designed a research model by reviewing theories and studies on the relationship among information quality, innovativeness, perceived ease of use, perceived usefulness, and intention to use the kiosks. The structural equation model revealed the following. Information quality and innovativeness had a significantly positive influence on perceived ease of use and perceived usefulness; furthermore, perceived ease of use had a significantly positive influence on perceived usefulness. In addition, both perceived ease of use and perceived usefulness had a significantly positive influence on intention to use. The results indicate that the airlines should constantly develop user-friendly contents and design of the self check-in kiosks.

• 한국멀티미디어학회논문지
• /
• 제20권4호
• /
• pp.660-670
• /
• 2017

In case of auditing of the information system development project applying agile methodology, it is not appropriate to carry out a comprehensive check on the establishment of information system with only the existing check on software. This study considers the characteristics of the agile methodology in terms of Information System Auditing. To improve inspection quality of development project with agile methodology by deriving detailed check items of test activities at each stage, this study proposes a strategy to improve the check on software for the test activities of the supervisory model that is suitable for agile methodology, which emphasizes repetitive work.

• 대한디지털의료영상학회논문지
• /
• 제12권1호
• /
• pp.59-64
• /
• 2010

We examined the accuracy and efficiency of phantom by applying the designed phantom in order to check daily quality assurance easily by objective criteria and to confirm daily quality assurance of linear accelerator, simulator, and CT-simulator. The results of 10 weeks of linear accelerator output dose using American Association of Physicists in Medicine(AAPM) daily quality assurance guide were measured within ${\pm}1%$ of error. Mechanical check of laser alignment, optical distance indicator(ODI), CT scanner laser and alignment of gantry lasers with the center of imaging plane were measured within ${\pm}1mm$. Daily average working time for daily quality assurance of radiation therapy equipments was 38 minutes. The designed phantom was easy to install and daily quality assurance was possible with only one installation. The aspects reproducibility and efficiency as well as accuracy of quality assurance were excellent.