• Geophysics and Geophysical Exploration
• /
• v.5 no.4
• /
• pp.223-235
• /
• 2002

Since weak Bones or geological lineaments are likely to be eroded, there may develop weak Bones beneath rivers, and a careful evaluation of ground condition is important to construct structures passing through a river. DC resistivity method, however, has seldomly applied to the investigation of water-covered area, possibly because of difficulties in data aquisition and interpretation. The data aquisition having high quality may be the most important factor, and is more difficult than that in land survey, due to the water layer overlying the underground structure to be imaged. Through the numerical modeling and the analysis of a case history, we studied the method of resistivity survey at the water-covered area, starting from the characteristics of measured data, via data acquisition method, to the interpretation method. We unfolded our discussion according to the installed locations of electrodes, ie., floating them on the water surface, and installing them at the water bottom, because the methods of data acquisition and interpretation vary depending on the electrode location. Through this study, we could confirm that the DC resistivity method can provide fairly reasonable subsurface images. It was also shown that installing electrodes at the water bottom can give the subsurface image with much higher resolution than floating them on the water surface. Since the data acquired at the water-covered area have much lower sensitivity to the underground structure than those at the land, and can be contaminated by the higher noise, such as streaming potential, it would be very important to select the acquisition method and electrode array being able to provide the higher signal-to-noise ratio (S/N ratio) data as well as the high resolving power. Some of the modified electrode arrays can provide the data having reasonably high S/N ratio and need not to install remote electrode(s), and thus, they may be suitable to the resistivity survey at the water-covered area.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.24 no.6
• /
• pp.521-537
• /
• 2012

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2011. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of fluid machinery and fluid flow, thermodynamic cycle, and new and renewable energy. Various topics were presented in the field of fluid machinery and fluid flow. Research issues mainly focused on the rankine cycle in the field of thermodynamic cycle. In the new and renewable energy area, researches were presented on geothermal energy, fuel cell, biogas, reformer, solar water heating system, and metane hydration. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer, nanofluids and industrial heat exchangers. Researches on heat transfer characteristics included heat transfer above liquid helium surface in a cryostat, methane hydrate formation, heat and mass transfer in a liquid desiccant dehumidifier, thermoelectric air-cooling system, heat transfer in multiple slot impinging jet, and heat transfer enhancement by protrusion-in-dimples. In the area of pool boiling and condensing heat transfer, researches on pool boiling of water in low-fin and turbo-B surfaces, pool boiling of R245a, convective boiling two-phase flow in trapezoidal microchannels, condensing of FC-72 on pin-finned surfaces, and natural circulation vertical evaporator were actively performed. In the area of nanofluids, thermal characteristics of heat pipes using water-based MWCNT nanofluids and the thermal conductivity and viscosity were measured. In the area of industrial heat exchangers, researches on fin-tube heat exchangers for waste gas heat recovery and Chevron type plate heat exchanger were implemented. (3) Refrigeration systems with alternative refrigerants such as $CO_2$, hydrocarbons, and mixed refrigerants were studied. Heating performance improvement of heat pump systems were tried applying supplementary components such as a refrigerant heater or a solar collector. The effects of frost growth were studied on the operation characteristic of refrigeration systems and the energy performance of various defrost methods were evaluated. The current situation of the domestic cold storage facilities was analyzed and the future demand was predicted. (4) In building mechanical system fields, a variety of studies were conducted to achieve effective consumption of heat and maximize efficiency of heat in buildings. Various researches were performed to maximize performance of mechanical devices and optimize the operation of HVAC systems. (5) In the fields of architectural environment and energy, diverse purposes of studies were conducted such as indoor environment, building energy, and renewable energy. In particular, renewable energy and building energy-related researches have mainly been studied as reflecting the global interests. In addition, various researches have been performed for reducing cooling load in a building using spot exhaust air, natural ventilation and energy efficiency systems.

• Food Science and Preservation
• /
• v.24 no.6
• /
• pp.802-812
• /
• 2017

This study was conducted to investigate the quality properties depending on the cultivation methods (general, organic, pesticide-free) of yuza and its various parts (peel, pulp, seed). The contents of hesperidin were the highest in yuza feel grown by pesticide-free method (13.23 mg/g). The contents of naringin presented a higher content in the peel, especially which of the general (4.62 mg/g) showed the highest value. Vitamin C analysis showed the highest content in the peel, significantly varied according to the cultivation method and various parts (p<0.05). Vitamin C value was significantly highest in organic peel, which was 770.02 mg/100 g, whereas among the peel, the pulp and the seed were it the lowest in the seed. The content of total polyphenols were the highest in general peel (0.85 mg/g). Flavonoid content of pesticide-free seed was significantly higher than those of the other yuja samples which was 0.89 mg/g (p<0.05). The DPPH radical scavenging activity was relatively more active in the peel among the above-mentioned three parts, especially the pesticide-free peel was most active, which was 73.94%. The ABTS radical scavenging activity of organic peel was significantly active among the samples, which was 84.47% (p<0.05). Based on these results, it can be said that yuja has variety of useful components in the pulp and the seed as well as the peel: and thus it's hight recommended to develop more varied yuja products.

• Korean Journal of Plant Resources
• /
• v.27 no.1
• /
• pp.60-71
• /
• 2014

This study was conducted to identify the potential of rape stalk as a raw material for biorefinery process of rape flower. At first, rape stalk (RS) was immersed in distilled water (DW), acetic acid (AA), oxalic acid (OA), sulfuric acid (SA) and sodium hydroxide (SH) solutions, and the content of reducing sugars liberated from immersed RS was analyzed. Glucose, xylose, arabinose and sucrose were detected varying with the immersion type. In particular, 1% AA-immersion of RS for 72 hr was the most effective conditions to liberate glucose from RS. Secondly, the RS residues were used for elementary analysis and fabrication of fuel pellets. In addition to the solution type, concentration of immersion solutions (0%, 1%, 2%) and immersion time (24, 72, 120 hr) were used as experimental factors. The contents of nitrogen, sulfur and chlorine reduced effectively through the immersion of RS in DW, AA and OA solutions. For properties of RS-based pellets, bulk density and higher heating value of RS-based pellets greatly increased with the immersion of RS, and the qualities were much higher than those of the A-grade pellet of the EN standards. Ash content decreased remarkably through the immersion of RS, and was satisfied with the A-grade pellet standard. Durability was negatively affected by the immersion of RS, and did not reached to B-grade of the EN standard. In conclusion, acid immersion of RS can be a pretreatment method for the production of fuel pellet and bioethanol, but use of the immersed RS for the production of high-quality pellets might be restricted due to low durability of immersed-RS pellets. Therefore, further studies, such as investigation of detailed immersion conditions, fabrication of mixed pellets with wooden materials and addition of binders, are needed to resolve the problems.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.174-180
• /
• 2000

This work was carried out to investigate the effects of mashing proportion of meju(as wet weight basis of raw soybean) to 20% salt brine on the chemical compositions and sensory characteristics of kanjang. By increasing the salt brine proportion in the kanjang mash, total nitrogen, TCA soluble nitrogen and total free amino acid content in kanjang were decreased accordingly, but although pH values and organic acids content were not different noticeably, the major organic acids in kanjang, lactic acid, pyroglutamic acid and acetic acid were increased up to the mashing proportion of 1:2 from 1:1 and pH values decreased up to that of 1:2.5. Residual sugar content in 1:1 kanjang was exceptionally high. The major free amino acids in kanjang were glutamic acid, lysine, alanine and leucine. The acceptability scores of kanjang tested by sensory evaluation were decreased in inverse proportion to the salt brine proportion of kanjang mash, but those of kanjang samples with $1:1{\sim}1:2.5$ mashing proportions were not significantly different but that of 1:3 different from 1:1 statistically at 5% level. The major chemical compositions, significantly effective to the acceptability of kanjang, were found to be glutamic acid and free amino acid by statistical analysis.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.16 no.3
• /
• pp.233-245
• /
• 2014

Nighttime correction of $CO_2$ flux is one of the most important and challenging tasks in eddy covariance measurements over a complex mountainous terrain. In this study, we have scrutinized the quality and the credibility of the $CO_2$ flux datasets which were produced by employing three different methods of nighttime correction, i.e., (1) friction velocity ($u^*$) correction, (2) light response curve (LRC) correction, and (3) advection-based van Gorsel (VG) correction. The whole year datasets used in our analysis were collected at the two KoFlux tower sites (i.e., GDK deciduous forest site at the upper hill and GCK coniferous forest site at the lower hill) located in the valley of Gwangneung National Arboretum in central Korea. The resultant magnitudes and patterns of ecosystem respiration ($R_E$), gross primary productivity (GPP), and net ecosystem exchange (NEE) of $CO_2$ showed marked differences among the datasets produced with three different correction methods, which were also site-specific. The examination from micrometeorological and ecological perspectives suggests that the major cause of some inconsistency seems to be associated with the advection of $CO_2$ along the sloping terrain and the inappropriate selection of the correction data that might have been already affected by advective flows. The comparison with the results from other studies indicated that the overall characteristics of the corrected $CO_2$ fluxes at GDK and GCK (except those with LRC correction) were well within the ranges reported in the literature for various ecosystems in East Asia in similar latitudes. However, our study also implies that there will be always a room for further improvement in the present datasets. Therefore, caution must be exercised for the data users in order to properly use the updated version of datasets through transparent, open and participatory communication with data producers.

• Journal of Korean Home Economics Education Association
• /
• v.21 no.1
• /
• pp.51-69
• /
• 2009

This study is intended to provide fundamental information to improve the quality of student activities presented in the Clothing & Textiles How to Dress Appropriately' section of the current middle school 'Technology Home Economics' textbooks so that Home Economics may better reflect students' interests, making it applicable in real life. The survey was conducted to 154 male and 160 female students on their preferences regarding student activities. The results are as follows. First, students who like clothing & textiles section regard "Opportunities to take part in various kinds of practices and student activities" as the major reason for preference. And the single biggest reason why they dislike the unit was due to "Too much contents to be memorized." Among various contents regarding dress in the unit, "How to Wear Clothes That Look Good on Me, and the Right Ways to Wear Them" attracted the most attention, regardless of what contents they consider necessary, interesting, or helpful in real life. Second, as for the time of implementation of the activities, students preferred "End of each class". They also preferred small-group activities (group size), well-structured problems (type of problems) and tasks that require analysis based on theoretical principles through experiments and practices (methods of implementation). Third, the findings as to the actual experience of conducting the student activities indicated that, in most cases, student activities were conducted in accordance to what was suggested in the textbooks, but not to what the students preferred. Therefore, in order to make home economics more applicable to students, it is desirable to focus on their everyday lives as is favored by the students, and increase small-group activities. Also, suggesting various and comprehensive problematic situations such as non-structured, open-ended problems and encouraging diverse implementation would be helpful in improving students' critical and creative thinking abilities.

• Journal of the Korean earth science society
• /
• v.33 no.6
• /
• pp.469-480
• /
• 2012

This study was to analyze the characteristics of diurnal variation of high $PM_{2.5}$ concentration, $PM_{2.5}/PM_{10}$ concentration ratio by spatio-temporal wind system (wind speed and wind direction) for high $PM_{2.5}$ concentration (over the 24 hr environmental standard of $PM_{2.5}$, $50{\mu}g/m^3$) in the air quality observation sites (Jangrimdong: Industrial area, Jwadong: Residential area) that were measured for 3 years (2005. 12. 1-2008. 11. 30) in Busan. The observation days of high $PM_{2.5}$ concentration were 182 at Jangrimdong and 27 at Jwadong. The seasonal diurnal variation of hourly mean of high $PM_{2.5}$ concentration and of $PM_{2.5}/PM_{10}$ concentration ratio showed a similar pattern that had higher variation at dawn, and night and in the morning than in the afternoon. Durning daytime in summer at Jwadong, the $PM_{2.5}/PM_{10}$ concentration ratio increased because a secondary particulate matter, which was created by photochemical reaction, decreased the coarse particles of $PM_{10}$ more than the fine particles of $PM_{2.5}$ concentrations in ocean condition. We did an analysis of spatio-temporal wind system (wind speed range and wind direction) in each time zone. The result showed that high $PM_{2.5}$ concentration at Jangrimdong occurred due to the congestion of pollutants emissions from the industrial complex in Jangrimdong area and the transportation of pollutants from places nearby Jangrimdong. It also showed that high $PM_{2.5}$ concentration occurred at Jwadong because of a number of local residential and commercial activities that caused the congestion of pollutants.

• Journal of Korean Society of Forest Science
• /
• v.98 no.1
• /
• pp.94-105
• /
• 2009

Black locust (Robinia pseudoacacia) stand is representative lowland exotic plantation with low ecological quality and arrested succession in South Korea. To facilitate succession and restore natural vegetation, small canopy gaps (${\sim}57m^2$), which can modify minimally structural variables and reduce restoration related disturbances on stand, was established in the black locust stand, and oak (Quercus serrata) seedlings were introduced in the gap. Two types of varying levels were introduced for gap creation; cutting (C) and girdling (G) on canopies. Understory removal (CU and GU) treatment was applied as subtypes of structural modification. Growth (diameter, height and leaf area) of target species and responses (species composition, diversity and coverage) of understory community were monitored during study years (2007~2008). Canopy openness was different significantly among treatments but not for light availability. Based on the result of logistic regression, growth of height and leaf area of seedlings were significant variables on seedling survival. Height and leaf area of seedlings were increased during study years, although radial growth was reduced. During study years, there were no significant differences in species composition and diversity, and total coverage increased about 20%. Increase of resources by gap creation and understory removal likely affect growth of target species. Small gap creation was effective to reduce understory responses in composition and diverstiy. Synthesized, growth of target species and responses of understory community to small canopy gap creation exhibited, in short term, possibility of utilization in alternative forest restoration and management option. Long-term monitoring is necessary to certificate effect of artificial gap creation on forest restoration.

• 대한공업교육학회지
• /
• v.41 no.1
• /
• pp.68-87
• /
• 2016

This research conducted a survey for total 166 teachers of schools so as to analyze validity and satisfaction for performance objectives of SMB administration subsidy the HRDP and the CEP in Specialized High School. The results of research are as follows. First, teachers recognize that purpose of HRDP is to expand employment of specialized high school and provide human resource of SMB. And, they recognize that HRDP is important to improve school outcomes and makes a positive effect on the improvement of school outcomes. Second, teachers recognize that objectives of HRDP are improvement of student's understanding for SMB, improvement of teacher's understanding for SMB, improvement of SMB's understanding of school, cultivation of student's occupational view, systematization of career guiding program based on employment process, strengthening of industry-academia cooperation education, improvement of the level of student's skill, fulfillment of workplace experience and practice focusing workplace learning, training of customized human resource for SMB, improvement of student's adaptation to the workplace, improvement of employment rate for SMB, expansion of job opportunities for students with SMB, preparation of the base of connection between school and SMB, publicity of school, expansion of opportunities to cooperate between SMB and school, establishment of cooperative system among industrial association and school, introduction and operation of the employment connective model for joint education and employment, strengthening of field professionalism of teachers. However, satisfaction for the achievement of objectives of HRDP except for strengthening of industry-academia cooperation education and improvement of employment rate for SMB is relatively lower than the validity. Third, teachers in charge of human resource training business of middle and small sized company's specialized high school recognize that objectives of CEP are expansion of job opportunities for students with SMB, excavation of good-quality SMB, expansion of opportunities to cooperate between SMB and school, fulfillment of workplace learning, improvement of student's major foundation and in-depth skill, improvement of literacy, math, teamwork and communication abilities for students' job performance, improvement of student's working attitude and student's proper career exploration decision. However, satisfaction for achievement of objectives of CEP is relatively lower than the validity.