• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.367-370
• /
• 2002

CRTs can be improved by means of magnetic quadrupoles. Areas of improvement are convergence, spot shape, image-flatness and space charge compensation.

• Journal of Information Display
• /
• v.3 no.3
• /
• pp.30-34
• /
• 2002

CRTs can be improved by means of magnetic quadrupoles. Areas of improvement are convergence, spot shape, image-flatness and space charge compensation.

• Progress in Superconductivity and Cryogenics
• /
• v.18 no.4
• /
• pp.40-43
• /
• 2016

Beam trajectory is needed to be controlled in heavy ion accelerator system. Quadruple magnets are widely used in heavy ion accelerator for focusing the transporting particles. A quadruple triplet system which consists of three consecutive quadrupoles, Q1, Q2 and Q3, is used to control beam trajectory at a focused position. Q1 and Q3 have symmetry with respect to Q2. The beam trajectory in magnet system is affected by higher order fields existed in real fields. For quadrupoles, the representation simulation of beam trajectory was carried out to study the beam trajectory and to estimate an effect of higher order field in triplet system. SCALA program was used to simulate the beam trajectory in $Opera^{TM}$. SCALA can analyze a large number of beam trajectories at the same time by adjusting the size of finite element of the emitter. With $Opera^{TM}$ and $Matlab^{TM}$ programs, the position of focused beam spot in quadruple triplet system can be increased or decreased using evolution strategy (ES) method, therefore the length of triplet system can be controlled. Finally, the quadruple triplet system with the appropriate length and expected beam spot range was suggested in this paper.

• Journal of KSNVE
• /
• v.7 no.1
• /
• pp.71-79
• /
• 1997

The objective of this study is to investigate experimentally the effect of surface conditions of the plate on the impinging jet noise. The experimental results about the spectrum, the sound pressure level and the directivity are pressented and discussed in relation with the surface conditions. Regardless of the surface conditions, the pure tones of high level are generated at the same frequency band and the overall sound power level of impinging jets is much higher than that of the free jet. However, the velocity dependence of the sound pressure level and the directivity are different between smooth surfaces and rough surfaces. The dependence of sound pressure level on the jet velocity shows that the smooth surface generates quadrupole-type sound like free jets. However, the perforated or the rough surface radiates sound power exactly proportional to the sixth power of the jet velocity, indicating that the source is fixed dipole type. The directivities of 1/3 octave band sound pressure level for both the free and impinging jet show the peak directivity at 115$^\circ$ upstream, probably due to the refraction associated with velocity gradient.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.5 no.2
• /
• pp.83-89
• /
• 1996

The objective of this study is to find experimentally the characteristics of the noise generated by the impinging jet on the normal plate, and also to compare the noise characteristics of the impinging jet with those of the free jet. The experiment is performed for the measurement of the noise specturm, the noise power, and the directivity for the free and impinging jets. From the experiment. it is found that the power of noises generated by the free jet as well as the impinging jet is proportional to the eighth power of the jet velocity through the circular converging nozzle, and that the noise power of the impinging jet is 15dB as high as one of the free jet when the plate distance is about within one to three times the nozzle diameter at the pressure ratio 1.39. The sound pressure level of the impinging jet depends upon the jet pressure and the plate distance. The plate distance with the maximum overall sound pressure level is increased with the jet pressure. The directivities with 1/3 octave band frequency for both the free jet and the impinging jet are greatly influenced by the convection effect.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.4
• /
• pp.220-225
• /
• 2004

A new ion beam extraction system is designed using a simple ion mass filter and a micro mass balance and a QMS based detecting system. A quadrupole Mass Filter is used for selective ion beam formation from inductively coupled high density plasma sources with appropriate electrostatic lens and final analyzing QMS. Also a quartz crystal microbalance is set between a QMF and a QMS to measure the etching and polymerization rate of the mass selected ion beam. An inductively coupled plasma was used as a ion/radical source which had an electron temperature of 4-8 eV and electron density of $4${\times}$10^{11}$＃/㎤. A computer interfaced system through 12bit AD-DA board can control the pass ion mass of the qmf by setting RF/DC voltage ratio applied to the quadrupoles so that time modulation of pass ion's mass is possible. So the direct measurements of ion - surface chemistry can be possible in a resolution of $1\AA$/sec based on the qcm's sensitivity. A full set of driving software and hardware setting is successfully carried out to get fundamental plasma information of the ICP source and analysed $Ar^{+}$ beam was detected at the $2^{nd}$ QMS.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.53-53
• /
• 2010

지표위의 어떤 지점에서의 지구자기의 수평분력 방향과 진북방향 사이의 각을 편각(Declination)이라고 정의한다. 쉽게 말하면 편각은 나침반의 자침이 가러 키는 방향과 진북방향과의 사이 각을 말한다. 대부분의 사람들은 나침반의 자침이 북자기극(North magnetic pole)을 가러킨다고 잘못알고 있다. 지구 다이나모설(Geodynamo theory)에 의하면 주로 철(약 90%)로 구성된 외핵 속에서 계속 생성 유지되고 있는 복잡한 (각각 나선형(helical)의 회전축에 대체로 평행하거나 평행하지 않은) 대류(Convection currents)에 수반하는 전류가 복잡한 지구자기장을 형성한다. 지표상에서 측정한 지구자기장의 자료를 Spherical harmonic analysis 으로 분석하면 한 개의 커다란 쌍극자(Dipole) (Inclined geocentric dipole 또는 주된 자기장(Main field) 이라고 부름), 적도쌍극자(Equatorial dipole), 4극자 (Quadrupoles), 8극자(Octupoles) 등의 여러 개의 크고 작은 쌍극자들의 총합이 지구자기장의 근원인 것처럼 해석되고 있다. 어떤 지점에서의 지구자기장의 방향은 외핵에서 생성된 천체 자기장에서 Main field를 제거한 나머지 자기장과, 상부 맨틀(upper mantle), 지각 및 지표상에 존재하는 인공 물체 또는 암석 및 광석 등의 잔류자기 및 유도자기 그리고 지형 등의 영향으로 결정된다. 어떤 지점에서의 지구자기장의 방향은 태양풍(Solar wind)과 전리층 사이의 상호작용 등의 외부자장(external field)의 영향도 받는다. 비쌍극자 자장(Non-dipole field)은 지표상에서 측정되는 총자기장에서 외핵에서 생성된 주된 자기장(Main field) 즉, 지구의 회전축에서 약 11.5도 기울어진 쌍극자 자장을 제거하고 남는 자기장을 말한다. 따라서 편각은 비쌍극자자장의 영향을 가장 많이 받는다. 비쌍극자 자장은 정지한 상태의 자장(standing field) 과 매년 서쪽으로 약 0.2도 움직이는 Westward drift하는 자장으로 크게 두 가지로 구분된다. 쌍극자 자장의 방향은 매우 느리게 변하지만 그 세기는 현재 비교적으로 빠르게 약해지고 있다. 비교적으로 매우 빠르게 변하는 비쌍극자 자장의 변화를 영년변화(Secular variation) 이라고 한다.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3344-3351
• /
• 2021

The Rare Isotope Science Project was launched in 2011 in Korea toward constructing the Rare isotope Accelerator complex for ON line experiments (RAON). RAON will house several experimental systems, including the Muon Spin Rotation/Relaxation/Resonance (μSR) facility in High Energy Experimental Building B. This facility will use 600-MeV protons with a maximum current of 660 pμA and beam power of 400 kW. The key μSR features will facilitate projects related to condensed-matter and nuclear physics. Typical experiments require a few million surface muons fully spin-polarized opposite to their momentum for application to small samples. Here, we describe the design of a muon transport beam line for delivering the requisite muon numbers and the electromagnetic-component specifications in the μSR facility. We determine the beam-line configuration via beam-optics calculations and the transmission efficiency via single-particle tracking simulations. The electromagnet properties, including fringe field effects, are applied for each component in the calculations. The designed surface-muon beamline is 17.3 m long, consisting of 2 solenoids, 2 dipoles affording 70° deflection, 9 quadrupoles, and a Wien filter to eliminate contaminant positrons. The average incident-muon flux and spin rotation angle are estimated as 5.2 × 10⁶ μ⁺/s and 45°, respectively.

• Geophysics and Geophysical Exploration
• /
• v.10 no.1
• /
• pp.50-59
• /
• 2007

The advent of towed geo-electrical array surveying on water and land has resulted in datasets of magnitude approaching that of airborne electromagnetic surveying and most suited to 1D inversion. Robustness and complete automation is essential if processing and reliable interpretation of such data is to be viable. Sharp boundaries such as river beds and the top of saline aquifers must be resolved so use of smoothness constraints must be minimised. Suitable inversion algorithms must intelligently handle low signal-to-noise ratio data if conductive basement, that attenuates signal, is not to be misrepresented. A noise-level aware inversion algorithm that operates with one elastic thickness layer per electrode configuration has been coded. The noise-level aware inversion identifies if conductive basement has attenuated signal levels so that they are below noise level, and models conductive basement where appropriate. Layers in the initial models are distributed to span the effective depths of each of the geo-electric array quadrupoles. The algorithm works optimally on data collected using geo-electric arrays with an approximately exponential distribution of quadrupole effective depths. Inversion of data from arrays with linear electrodes, used to reduce contact resistance, and capacitive-line antennae is plausible. This paper demonstrates the effectiveness of the algorithm using theoretical examples and an example from a salt interception scheme on the Murray River, Australia.