• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.5
• /
• pp.17-27
• /
• 2000

In a SCH(separate confinement heterostructure) QW(quantum well) laser, we calculated the optical gain, the differential gain and recombination current in the QW and derived the bulk carrier density in the SCH region as a function of the QW current by using the analytical capture escape model. Based upon above relations, we found the optical gain and the differential gain correspond to the ratios of carrier and current injected into the QW.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.149-149
• /
• 2010

The origin of the inhomogeneous distribution of photoluminescence (PL) peak wavelength on a commercial 2" GaN wafer for green light emitting diode has been investigated by wide momentum transfer (Q) range x-ray diffraction (XRD) profile of InGaN/GaN multiple quantum wells. Near the GaN (0004) Bragg peak, wide-Q range XRD (${\Delta}Q$ > $1.4{\AA}-1$) was measured along the growth direction. Wide-Q XRD gives precise and direct information of ultra-thin InGaN quantum well structure. Based on the QW structural information, the variation of PL spectra can be explained by the combined effect of temperature gradient and slightly uneven flow of atomic sources during the QW growth. In narrow variations of indium composition and thickness of QW, an effective indium composition can be a good character to match structural data to PL spectra.

• Journal of the Optical Society of Korea
• /
• v.6 no.2
• /
• pp.33-36
• /
• 2002

We propose a modulation scheme of optical absorption in a coupled asymmetric quantum well (QW) structure via electrically controllable quantum interference. It is based on the parallel-perpendicular energy coupling effect. We show that by applying an external electric Held in the parallel direction (to the QW layers), we can obtain a maximum (peak-type) absorption at a specific wavelength where absorption cancellation would occur due to electrically induced transparency without such an external Held .

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.172-172
• /
• 2010

In the area of optoelectronic devices based on GaN and related ternary compounds, the two-dimensional system like as quantum wells (QWs) has been investigated as an effective structure for improving the light-emitting efficiency. Generally, the quantum well active regions in III-nitride light-emitting diodes grown on conventional c-plane sapphire substrates have critical problems given by the quantum confined Stark effect (QCSE) due to the effects of strong piezoelectric and spontaneous polarizations. However, the QWs grown on nonpolar templates are free from the QCSE since the polar-axis lies within the growth plane of the template. Also the unique characteristic of linear polarized light emission from nonpolar QW structures is attracting attentions because it is proper to the application of back-light units of liquid crystal display. In this study, we characterized optical properties of the a-plane InGaN/GaN QW structures by temperature-dependent photoluminescence (TDPL) measurements. From the photoluminescence (PL) spectrum measured at 300 K, green emission centered at 520 nm was observed for the QW region. Since indium incorporation on nonpolar QWs is lower than that on c-plane, this high indium-doping on a-plane InGaN QWs is not common. Therefore, the effect of high indium composition on optical properties in a-plane InGaN QWs will be extensively studied.

• Proceedings of the Optical Society of Korea Conference
• /
• 2005.02a
• /
• pp.290-291
• /
• 2005

We have presented a comprehensive effective-mass Hamiltonian for strained Wurtzite semiconductors using k${\cdot}$p method and Kane's model. This theoretical groundwork provides a foundation for investigating the electrical and optical properties of wurtzite strained quantum-well lasers.

• Applied Chemistry for Engineering
• /
• v.30 no.4
• /
• pp.499-503
• /
• 2019

Characteristics of solar cells employing a lattice matched GaInP/GaAs quantum well (QW) structure in a single N-AlGaInP/p-InGaP heterojunction (HJ) were investigated and compared to those of solar cells without QW structure. The epitaxial layers were grown on a p-GaAs substrate with $6^{\circ}$ off the (100) plane toward the <111>A. The heterojunction of solar cell consisted of a 400 nm N-AlGaInP, a 590 nm p-GaInP and 14 periods of a 10 nm GaInP/5 nm GaAs for QW structure and a 800 nm p-GaInP for the HJ structure (control cell). The solar cells were characterized after the anti-reflection coating. The short-circuit current density for $1{\times}1mm^2$ area was $9.61mA/cm^2$ for the solar cell with QW structure while $7.06mA/cm^2$ for HJ control cells. Secondary ion mass spectrometry and external quantum efficiency results suggested that the significant enhancement of $J_{sc}$ and EQE was caused by the suppression of recombination by QW structure.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.1
• /
• pp.89-93
• /
• 2004

Piezoelectric fields built in I $n_{x}$G $a_1$$_{-x}$N/GaN (x=0.06∼0.1) quantum wells (QWs) have been estimated by comparing the transition energies, both calculated and measured by photoluminescence (PL). The calculation was numerically carried out with a rectangular QW model, where the effective bandgap considering a bowing facto, energy levels quantized for the lowest lying electrons and heavy holes (1e-lhh), and biaxial compressive strain were included except for the piezoelectric fields. The calculated values were observed to be larger (9∼15 meV) than the measured values by PL, which was considered to be caused by the piezoelectric fields built in InGaN/GaN QW interface. In addition, we observed the energy shift by measuring the EPDPL (excitation power-dependent PL), which was compared with the energy difference caused by the piezoelectric fields.

• Journal of the Korean Vacuum Society
• /
• v.22 no.1
• /
• pp.7-12
• /
• 2013

We fabricated ZnO-ZnMgO single quantum well (SQW) samples having different well-widths by using the atomic layer deposition technique. The QW samples exhibit different optical transition behaviors with different QW widths. We confirm that when the well-width of 1.5 nm does not have a confined quantum energy level due to the Mg diffusion into the well caused by after-thermal treatment whereas the QWs wider than 1.5 nm show optical transitions between the confined energy levels.

• Journal of the Korean Vacuum Society
• /
• v.16 no.5
• /
• pp.371-376
• /
• 2007

We have investigated the lasing characteristics of the InGaAs quantum dot laser diode (QD-LD) and InGaAs quantum well laser diode (QW-LD) operated at the 980 nm wavelength range. The 980-nm lasers are used as a pumping source for a erbium-doped fiber amplifier (EDFA) and it shows high efficiency in long-haul optical fiber network. We have compared the threshold current density, the characteristic temperature, the optical power and the internal efficiency of QD-LD and QW-LD under a pulsed current condition. The QD-LD shows superior performances to the QW-LD. Further optimization of a LD structure is expected to the superior performances of a QD-LD.

• Journal of Sensor Science and Technology
• /
• v.30 no.6
• /
• pp.441-445
• /
• 2021

The components affecting the extrinsic transconductance (g_{m_ext}) in In_0.7Ga_0.3As quantum-well (QW) high-electron-mobility transistors (HEMTs) on an InP substrate were investigated. First, comprehensive modeling, which only requires physical parameters, was used to explain both the intrinsic transconductance (g_{m_int}) and the g_{m_ext} of the devices. Two types of In_0.7Ga_0.3As QW HEMT were fabricated with gate lengths ranging from 10 ㎛ to sub-100 nm. These measured results were correlated with the modeling to describe the device behavior using analytical expressions. To study the effects of the components affecting g_{m_int}, the proposed approach was extended to projection by changing the values of physical parameters, such as series resistances (R_S and R_D), apparent mobility (𝜇_{n_app}), and saturation velocity (𝜈_sat).