• Progress in Superconductivity and Cryogenics
• /
• v.17 no.1
• /
• pp.10-13
• /
• 2015

High-temperature superconducting coated conductors (HTS-CCs) are good candidates for resistive superconducting fault current limiter (RSFCL) applications. However, the high current density they can carry and their low thermal diffusivity expose them to the risk of thermal instability. In order to find the best compromise between stability and cost, it is important to study the heat transfer between HTS-CCs and the liquid nitrogen ($LN_2$) bath. This paper presents an experimental method to monitor in real-time the temperature of a quenched HTS-CC during a current pulse. The current and the associated voltage are measured, giving a precise knowledge of the amount of energy dissipated in the tape. These values are compared with an adiabatic numerical thermal model which takes into account heat capacity temperature dependence of the stabilizer and substrate. The result is a precise estimation of the heat transfer to the liquid nitrogen bath at each time step. Measurements were taken on a bare tape and have been repeated using increasing $Kapton^{(R)}$ insulation layers. The different heat exchange regimes can be clearly identified. This experimental method enables us to characterize the recooling process after a quench. Finally, suggestions are done to reduce the temperature increase of the tape, at a rated current and given limitation time, using different thermal insulation thicknesses.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.639-640
• /
• 2006

We investigated fault current limitation characteristics of the resistive superconducting fault current limiter(SFCL) which consisted of a Bi-2212 bulk coil and a shunt coil. The Bi-2212 bulk coil and the shunt coil were connected in parallel. The Bi-2212 bulk coil was placed inside the shunt coil to induce field-assisted quench. The fault test was conducted at an input voltage of 200 $V_{rms}$ and fault current of 12 $kA_{rms}$ and 25 $kA_{rms}$. The fault conditions were asymmetric and symmetric, and the fault period was 5 cycles. The test results show that the SFCL successfully limited the fault current of 12 $kA_{rms}$ and 25 $kA_{rms}$ to below $5.5{\sim}6.9kA_{peak}$ within $0.64{\sim}2.17$ msec after the fault occurred. Limitation was faster under symmetric fault test condition due to the larger change rate of current. We concluded that the speed of fault current limitation was determined by the speed of current rise rather than the amplitude of a short circuit current. These results show that the Bi-2212 bulk coil is suitable for distribution-class SFCLs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.05a
• /
• pp.46-48
• /
• 2006

We investigated the analysis of operation mode of three-phase flux-lake type superconducting fault current limiter(SFCL). The structure of the integrated three-phase flux-lock type SFCL consisted of three-phase flux-lock reactor wound on an iron core with the same turn between coil 1 and coil 2 in each phase. When the SFCL is operated under the normal condition, the flux generated in the iron core is zero because the flux generated between two coils of each single phase is canceled out. Therefore, the SFCL's impedance is zero and the SFCL has negligible influence on the power system, However, if a fault occurs in any single-phase among three phases, the flux generated in the iron core is not zero any more. The flux makes elements of all phase-quench irrespective of the fault type, which reduces the current of fault phase as well as the current of sound phase.

• Journal of Industrial Convergence
• /
• v.18 no.1
• /
• pp.97-107
• /
• 2020

Since long ago, there has been a saying that "Drink water to quench thirst, drink alcohol to remove anguish and anxiety, and drink tea to recover from fatigue and refresh mind." Tea is really better for body and mind than water when it is drunken long and is valuable Jinda(眞茶) given by mother nature. In particular, curing tea reflecting characteristics of climate changes in all seasons helps in keeping health. Since tea contains the Yin-Yang system, which is a philosophical ideology of ancient people, old predecessors knew which tea they should brew and drink for curing in harmony with Yin and Yang. As a factor that influences component changes of tea, a complex interaction of heaven, earth and man is important and especially, mind of a person to handle tea is most important. Tea is a natural curing drink, which plays a role as a bridge between humans and nature.

• 한국문화재보존과학회:학술대회논문집
• /
• 2004.10a
• /
• pp.43-54
• /
• 2004

In the course of examining the metallic structure of Iron chisel and Iron arrowhead, a relics of the 16th or 17th of Chosun Dynasty unearthed at near Gangsun-tower, Chengpyeong temple, we collected un-eroded samples from the relics and looked into the metallic structure through mounting, grinding and polishing, and etching, while analyzing non-metallic inclusion via SEM and EDS. The research metallic structure and SEM-SDS analysis, found that Iron chisel and Iron arrowhead had been produced from sponge iron close to pure Iron made by solid low heat reducing and then increased in rate of carbon by carburizing, It also found that Iron chisel had been hardened through the repetitive process of quench hardening and heat treatment, after being increased in amount of carbon to a certain level. Up to now, there have been a number of studies in the domestic academia which were made primarily of the structure of metallic relics of three countries the period or tile era before that. Although this research was limited in type and number of the relics, it turned out to be Interesting in that it revealed the 16thor 17th century way of processing iron, even in fragments. It is thought to be fruitful that we found iron had been made even in the Chosun Dynasty from sponge iron. It is recommended that researches be made on the relics later to be excavated and originally made in $Kory\breve{o}$ or Chosun Dynasty, because they are important in history of metal technology.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.1
• /
• pp.113-117
• /
• 2008

We investigated the current limiting and the recovery characteristics of a flux-lock type superconducting fault current limiter(SFCL) according to the winding directions. The flux-lock type SFCL consists of two coils. The primary coil was wound in parallel to the secondary coil through an Iron core, and the secondary coil was connected with the superconducting element in series. We have changed the winding direction of coils to compare the resistive type SFCL with the flux-lock type SFCL. The current limiting and the recovery characteristics were dependent on the winding direction. The quenching time in the additive polarity winding was faster than that of the subtractive polarity winding or the resistivity type. A consumed energy in a superconducting element was represented as $W= VIt=I^2Rt$. We found that there was a difference in the consumed energies in accordance with winding types because of differences in voltages imposed on a superconducting element in accordance with a winding direction.

• YAKHAK HOEJI
• /
• v.41 no.6
• /
• pp.749-755
• /
• 1997

It has been reported that dose-dependent $Ca^{2+}$ increase by menadione in platelets could be measured by fluorescent dye, quin-2. The problems will be described here rel ating to measuring $Ca^{2+}$ in menadione-exposed platelets using fura-2 and fluo-3, widely used fluorescent indicators. Additions of menadione to fura-2 loaded platelets and their lysates resulted in marked reduction in fluorescence intensity at both 340nm ($Ca^{2+}$-unbound form) 380nm ($Ca^{2+}$-undbound form) excitation wavelengths. Fura-2 excitation spectra were overlapped with UV-visible absorption spectra of menadione, suggesting that light absorption by menadione itself could quench fluorescence generated by fura-2. Next approach was to use fluo-3 which has the higher wavelength (490nm) of excitation. Previous work demonstrated that treatment with probenecid to platelets was required to prevent fluo-3 dye leakage. However, probenecid itself was proven to be inadequate to measure the concentration of intracellular $Ca^{2+}$; by reducing menadione-induced cytotoxicity in platelets. Our results suggest that it is not feasible to measure $Ca^{2+}$ in platelets by using fura-2 and fluo-3 in the presence of probenecid, and cautions should be taken to measure changes of intracellular $Ca^{2+}$ levels by fluorescent dyes following chemical exposure.

• Journal of Radiation Protection and Research
• /
• v.26 no.4
• /
• pp.375-384
• /
• 2001

It is possible to count and perform quench correction on two ${\beta}$ -label samples so long as the maximum ${\beta}$-energies are sufficiently different. However, when 4he conventional technique is applied to the radioassay of a mixture of more than three nuclides, the reliability of the activities determined is considerably reduced, resulting from the large overlapping of liquid scintillation pulse height distributions of each nuclide. A technique that allows the activities of multiple ${\beta}$-labeled samples to be radioassayed was proposed by using the least square method. The technique was applied to mixture samples of $^3H,\;^{14}C,\;^{36}Cl$, and $^{90}Sr$. The analytical values were in good agreement with the reference values within 7% relative error.

• Bulletin of the Korean Chemical Society
• /
• v.27 no.11
• /
• pp.1801-1808
• /
• 2006

The interaction between whey carrier protein $\beta$-lactoglobulin type A and B (BLG-A and -B) and 2,2'-bipyridin n-hexyl dithiocarbamato Pd(II) nitrate (BPHDC-Pd(II)), a new heavy metal complex designed for anticancer property, was investigated by fluorescence spectroscopy combined with chemometry and circular dichroism (CD) techniques. A strong fluorescence quenching reaction of BPHDC-Pd(II) to BLG-A and -B was observed. Hence, BPHDC-Pd(II) complex can be bound to both BLG-A and -B, and quench the fluorescence spectra of the proteins. The quenching constant was determined using the modified Stern-Volmer equation. The binding parameters were evaluated by fluorescence quenching method. The results of binding study provided evidences presence of two and three sets of binding sites on the BLG-B and -A, respectively, for BPHDC-Pd(II) complex. Using fluorescence spectroscopy and chemometry, the ability of BLG-A and -B to form an intermediate upon interaction with BPHDC-Pd(II) complex was assessed. CD studies displayed that under influence of different concentrations of BPHDC-Pd(II) complex, the regular secondary structure of BLG-B had no significant changes, whereas for BLG-A a transition from $\alpha$-helix to $\beta$-structure was appeared. The results for both of BLG-A and -B displayed that BPHDC-Pd(II) complex can induce a conformational transition from the native form to an intermediate state with a slightly opened conformation, which is detectable with chemometry analyses.

• Journal of Hydrogen and New Energy
• /
• v.21 no.5
• /
• pp.460-469
• /
• 2010

To develop coal gasfication system, many studies have been actively conducted to describe the simulation of steady state. Now, it is necessary to study the gasification system not only in steady state but also in dynamic state to elucidate abnormal condition such as start-up, shut-down, disturbance, and develop control logic. In this study, a model was proposed with process simulation in dynamic state being conducted using a chemical process simulation tool, where a heat and mass transfer model in the gasifier is incorporated, The proposed model was verified by comparison of the results of the simulation with those available from NETL (National Energy Technology Laboratory) report under steady state condition. The simulation results were that the coal gas efficiency was 80.7%, gas thermal efficiency was 95.4%, which indicated the error was under 1 %. Also, the compositions of syngas were similar to those of the NETL report. Controlled variables of the proposed model was verified by increasing oxygen flow rate to gasifier in order to validate the dynamic state of the system. As a result, trends of major process variables were resonable when oxygen flow rate increased by 5% from the steady state value. Coal flow rate to gasifier and quench gas flow rate were increased, and flow rate of liquid slag was also increased. The proposed model in this study is able to be used for the prediction of gasification of various coals and dynamic analysis of coal gasification.