• 한국대기환경학회지
• /
• 제3권1호
• /
• pp.27-33
• /
• 1987

삼중수소 ($^{3}H$) 에 관한 환경 및 생물학상의 연구는 1950년대 중반부터 선진국에서 수행되오고 있다. 삼중소소에 대한 잠재적 노출의 경우 통상적 처리절차는 삼중수소의 신체부하량이라고 일컬어지는 이른바 신체내에 축적된 삼중수소의 양을 결정하기 위하여 삼중수소수로서 오줌속에 포함되는 삼중수소 방사능의 생리분석이다. 전신에 있어서 삼중수소의 최대허용신체부하량은 신체조직에 대하여 약 $30{\mu}Ci/{\ell}$ 이다. 생리분석에서 오줌속에 삼중수소를 검출하는데 가장 보편적인 조사준위(照射准尉)는 최대허용신체부하량의 1/10 이다. 이러한 생리분석 연구계획을 위해서는 소광보정(消光補正) 곡선을 그리는 것이 가장 우선적이다. 이것은 검뇨용 오줌의 색깔이 일정하지 않기 때문에 필요한 것이다. 이 경우에서 소광효과는 주로 오줌시료에 의한 섬광빛의 흡수에 기인된다. 소광보정곡선으로 판단된 공식은 통계적 근거에서 최소자승법에 의하여 Y (%) = 0.771 + 1.836 ${\tmes}10^{-4}$X(count)로 얻어졌다. 여기서 Y는 섬광계수 효율로서 약 12%에서 31% 범위의 값으로 나타났다. 본 논문에서는 삼중수소의 생물학적 반감기와 신체계통적으로 분포된 삼중수소에 적용되고 있는 정체(停滯) 공식에 관한 간략한 이론에 관하여 서술된다.

• 한국자기학회지
• /
• 제7권4호
• /
• pp.173-179
• /
• 1997

급속응고(melt spinning)법이 Fe-Nd-C의 경우와 마찬가지로 보자력이 높은 Fe-Pr-C 합금을 얻는데에 효과적인지 알아보기 위하여, 급속응고된 Fe-Pr-C 리본에 대하여 냉각속도 및 열처리의 변화에 따른 상, 미세조직 및 자기특성의 변화를 조사하였다. 냉각속도(wheel speed)가 증가할수록 as-spun 리본의 비정질화가 증가하여 40m/s에서 제조된 리본합금은 거의 비정질화하였다. 10m/s에서 제조된 결정질 리본의 상분포는 주소상태의 상분포와 유사하여 .alpha. -Fe가 일차상, Fe$_{17}$Pr$_{2}$C$_{x}$가 이차상으로 존재하였다. 20m/s에서도 결정질이 우세하게 나타나나, 이때에는 .alpha. -Fe의 정출이 약간 억제되는 반면 Fe$_{17}$Pr$_{2}$C$_{x}$의 정출이 현저하였으며, 30m/s에서는 비정질이 우세하여 소량의 결정질만이 존재하였다. 따라서 강자성 Fe$_{14}$Pr$_{2}$C 상은 as-spun 상태에서는 존재하지 않거나 미량이었으며, 주조합금의 경우와 마찬가지로 고상변태를 통해서 얻을 수 있었다. 일반적으로 as-spun리본이 비정질화할수록 비교적 낮은 온도에서 수분의 열처리만으로 완전한 Fe$_{14}$Pr$_{2}$C 상을 얻을 수 있었으며, 결정화가 완벽할수록 Fe$_{14}$Pr$_{2}$C를 얻기 위한 열처리 시간은 증가하였다. 이와 같이 얻은 Fe$_{14}$Pr$_{2}$C는 대부분 1 .mu. m 이하의 미세한 결정립을 가지고 있었으며, as-spun 리본의 비정질화가 완벽한 경우보다 덜 완벽한 경우(30m/s) 또는 결정질과 약간의 비정질이 혼합된 경우 (20m/s)에 열처리에 의한 보자력의 향상이 뚜렷하였다. 일반적으로 변태온도 구역안에서 열처리 온도가 높을수록 10분 이하의 짧은 열처리가 보자력의 향상에 효과적이었다.이었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 하계학술대회 논문집 Vol.7
• /
• pp.255-256
• /
• 2006

In this paper, we investigated the. characteristics of fault current limiting according to fault angle in the integrated three-phase flux-lock type SFCL in fault types such as the single-line-to-ground fault, the double-line-to-ground fault and the three-line-to-ground fault. When the SFCL is operating under normal condition, the magnetic flux generated between primary and secondary coils of each single phase is canceled out perfectly, so that the impedance of the SFCL is also not generated and the power system can be operated normally without any loss, However, if a fault occurs even in any phase out of three phases, quench happened in SFCL elements and the current flowing secondary coil is restricted abruptly. Finally, the balance of magnetic flux in whole SFCL system is destroyed, and the fault currents in every phase could be limited at the same time irrespective of the fault types. As a result, the developed SFCL in this study were operated normally as expected and the purpose of the integration of 3 phase current limiting was also achieved successfully. However, the fault current limiting characteristics of the SFCL was dependant on the quench characteristics of HTSC elements in each phase, and it was expected that the improvement of the SFCL could be possible through the introduction of HTSC elements which have better critical characteristics.

• 열처리공학회지
• /
• 제26권5호
• /
• pp.241-247
• /
• 2013

Hardenability and mechanical properties of boron-bearing steels containing C, Mo and Cr were investigated in this study. Using quench dilatometer, the steel specimens were cooled down to room temperature at different cooling rates to construct continuous cooling transformation diagrams and then the transformation products from austenite were examined. A critical cooling rate was introduced as an index to quantitatively evaluate the hardenability. The C addition to boron-bearing steels did not significantly affect hardenability compared to boron-free steels although it increases the hardenability. With the same content, the Mo addition largely increased the hardenability of boron-bearing steels than the Cr addition because it decreased both the transformation start and finish temperatures at low cooling rates. In particular, the Mo addition completely suppressed the formation of eutectoid ferrite even at the slow cooling rate of $0.2^{\circ}C/s$, whereas the Cr addition nearly suppressed it at the cooling rates above $3^{\circ}C/s$.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.529-534
• /
• 2012

The fluorescence of 4',6-diamidino-2-phenylindole (DAPI) bound to DNA at a [DAPI]/[DNA base] ratio of 0.005 was quenched by meso-tetrakis(N-methylpyridinium-4-yl)porphyrin (TMPyP) or cis-bis(N-methylpyridinium-4-yl)porphyrin (BMPyP) when both DAPI and either porphyrin spontaneously bound to the same DNA strand. The quenching was investigated using the "one-dimensional inner sphere" and the "F$\ddot{o}$rster resonance energy transfer" (FRET) models. Total quenching occurred when DAPI and TMPyP were up to 19.3 base pairs or $66\AA$ apart. BMPyP could quench the fluorescence up to 13.9 base pairs or $47\AA$. TMPyP, which intercalated between the DNA base-pairs, appeared to be a better acceptor than BMPyP, which stacked along the DNA stem. The higher quenching and higher resonance energy transfer efficiency of TMPyP was due to the larger overlap integral between its absorption spectrum and the emission spectrum of DNA-bound DAPI.

• Bulletin of the Korean Chemical Society
• /
• 제34권6호
• /
• pp.1673-1678
• /
• 2013

Lumazine protein is a member of the riboflavin synthase superfamily and the intense fluorescence is caused by non-covalently bound to 6,7-dimethyl 8-ribityllumazine. To figure out the binding modes and the structure of the N-terminal domain of lumazine protein, the wild type of protein extending to amino acid 118 (N-LumP 118 Wt) and mutants of N-LumP 118 V41W, S48W, T50W, D64W, and A66W from Photobacterium leiognathi were purified. The biochemical properties of the wild type and mutants of N-LumP 118 proteins were analyzed by absorbance and fluorescence spectroscope. The peak of absorbance and fluorescence of lumazine ligand were shifted to longer wavelength on binding to N-LumPs. The observed absorbance value at 410 nm of lumazine bound to N-LumP 118 proteins indicate that one mole of N-LumP 118 proteins bind to one mole of ligand of lumazine. Fluorescence analysis show that the maximum peak of fluorescence of N-LumP S48W was shifted to the longest wavelength by binding with 6,7-dimethyl 8-ribityllumazine and was shown to the greatest quench effect by acrylamide among all tryptophan mutants.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.393-395
• /
• 2006

We investigated the operational characteristics of the hybrid-type superconducting fault current limiter (SFCL) according to the serial and parallel connections of secondary circuits. The hybrid-type SFCL consists of a transformer, which has a primary winding and several secondary windings with $YBa_2Cu_3O_7$ films connected in series and parallel. In order to increase the capacity of the SFCL, the serial connection between each current limiting unit is necessary. The hybrid-type SFCL with the serial connection in secondary circuits could show superior characteristics than those of the parallel connections in the current limiting and quench time. The resistances generated in the superconducting units were also lowered at the parallel connections. We confirmed that the parallel connection reduced the power burden of each superconducting unit under the same conditions because of the simultaneous quenching between superconducting units.

• 환경위생공학
• /
• 제21권1호
• /
• pp.52-57
• /
• 2006

Metallothioneins(MTs) belong to the class of low molecular weight proteins. Recently, it has been suggested that MTs may playa direct role in cellular defense against oxidative stress by functioning as antioxidants. Oxidative damage to different cellular components makes a major contribution to many pathogenenesses. Several studies have demonstrated that MT is able to quench a wide range of reactive oxygen species at a higher efficiency than other well known antioxidants such as superoxide dismutate(SOD). The present study was designed to evaluate the effect of MT on the activities of the reactive oxygen species removal system. MT showed the scavenging of superoxide in the SOD assay system in the presence or absence of SOD. When MT was added to nicotinamide adenine dinucleotide phosphate(NADPH) oxidation system in presence of fixed amount of SOD increase the breakdown rate of superoxide. When MT was added to the system that form nitrite from hydroxylammonium chloride, the formation of nitrite was inhibit. We concluded that the function of MT as antioxidant might have an effect on the level of superoxide scavenging.

• Progress in Superconductivity
• /
• 제11권1호
• /
• pp.13-18
• /
• 2009

Partial discharge measurements in cryogenic dielectric materials of HTS transformer are very important because partial discharge was regarded as primary source for ageing and breakdown of cryogenic materials. But, partial discharge measurement techniques and its effects in low temperature high voltage environments were not suggested and there exist only a few reports on this research fields. Therefore, in order to implement reliable HTS transformers, partial discharge diagnosis techniques for cryogenic materials of HTS transformers were investigated using partial discharge (PD) pattern analysis methods. In this works, four different types of artificial defects including turn to turn insulation, free moving particle, void and protrusion, have been fabricated since it was commonly regarded that they might cause the sudden service failures of the power apparatus. For this purpose, these defects are installed into the dielectric materials in liquid nitrogen and experimental investigations have been carried out for the diagnosis of HTS transformer. And various PD patterns caused by the amount of quench of superconductors were analyzed. Throughout this works, the different PD patterns in cryogenic dielectric materials in liquid nitrogen, and PD measuring technique could be the fundamental steps to establish diagnosis technologies of HTS transformer for power applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1562-1563
• /
• 2011

Partial discharge measurement is one of the effective diagnostic techniques to predict abnormal high voltage dielectric insulation conditions of the electric equipments. Recently partial discharge diagnostic techniques were also utilized to evaluate the cryogenic dielectric insulation of high temperature superconducting electric equipment in liquid nitrogen. Generally, liquid nitrogen at 77 K is used used as the cryogenic and dielectric media for many high temperature superconducting high voltage applications. When a quench in the superconductor occurs, bubbles are generated which can affect the dielectric properties of the liquid nitrogen. So in order to reduce the bubble formation, subcooled nitrogen was also employed for this purpose. In this work, investigation of partial discharge characteristics of subcooled liquid nitrogen were conducted in order to clarify the retardation of partial discharge initiation voltage according to the different subcooling temperature of liquid nitrogen. And also the relation of partial discharge phenomena and the activities of bubbles were analyzed. It was observed that PD inception voltages shows rather different characteristics according to the decrease of subcooling temperature and the activities of bubbles were strongly influenced by temperature of the subcooled liquid nitrogen.