• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 A
• /
• pp.122-124
• /
• 1995

Electrical transmission and distribution networks must withstand an occasionally abnormal condition such as a fault, with prejudicial consequences for the line, transformers or generators. And the improvement of reliability and quality of the delivered power from an electric utility motivates the development of new technologies in power applications. As a part of these studies, the usefulness and utility of a superconduction fault current limiter(SFCL) are shown. The SFCL is applied to 22.9KV three-phase power system and performed short circuit studies. The verified quench characteristic of SFCL is adopted for fault simulation and the results are compared with those of system which have not SFCL.

• 소성∙가공
• /
• 제13권5호
• /
• pp.441-448
• /
• 2004

Heat treatment is one of the critical manufacturing processes that determine the quality of a product. This paper presents experimental and analytical results for the quench of a ring gear in stagnant oil. The goal of this study is to develop heat transfer predicting model in an overall analysis of the quenching process, Thermal conductivities which are dependant on temperatures and convection coefficients which are obtained by inverse method are used to develop the accurate heat transfer model. The results of heat transfer model have a good agreement with experimental results.

• 생약학회지
• /
• 제35권1호통권136호
• /
• pp.45-51
• /
• 2004

Panax ginseng C. A. Meyer (Araliaceae) is listed in Shen Nung Pentsao Ching(神農本草經) as the remedy for replenishing the primodial qi(氣), restoring pulse, treating collapse, tonifing the spleen and lag, promoting the production of body fluid to quench thirst, tranquilizing the mind, and improving the function of brain. The prescriptions of In Sam Tang(人參揚) are also recorded in many other Chinese medical books. The identification of the age of Panax ginseng is very important in commercial market as well as in research field. However, any reports about it have not been clearly established yet. To clarify the criterion, the morphological and anatomical characteristics of the roots of various age Panax ginseng cultivated in Korea were studied. The characteristics of cork layer, secretory canal, and vessel were shown to bε useful keys to confirm the age of Panax ginseng.

• 한국표면공학회지
• /
• 제17권1호
• /
• pp.7-13
• /
• 1984

Carburizing of a 12%Cr steel containing 0.6%Si was performed at 950$^{\circ}C$ for various times, and the microstructure, hardness and the water characteristics of the carburized chromium steel were examined. The results obtained in this study are as follows: 1. Carbide-dispersed layer (CD layer) with fine dispersion of $Cr_7C_3$ in martensite matrix was formed by carburizing. The radius and amount of the carbides in the surface region of CD layer were about 0.3${\mu}m$ and 35% by volume, respectively. 2. Chromium steel carburized and quench-tempered showed better wear resistance and hardness than ordinary high chromium tool steel. It is concluded from these results that fine dispered carbides are very effective in improving wear resistance and hardness.

• Archives of Pharmacal Research
• /
• 제22권2호
• /
• pp.173-178
• /
• 1999

Remarks on polyphenolic compounds has been arisen since past few years. the flavonoids appears to be the important groups of compounds with their capability to inhibit DNA damage, lipid peroxidation, to quench free radicals and, at least, anticarcinogenic and antiproliferative effects. On the other hand, their mechanism of action is still unexplained. Apigenin and luteolin are the most wide-spread flavones and they exhibited to be useful in chemoprevention. UV spectrometric and DC polarographic studies on these two compounds have been carried out with regard to changing pH. The most significant changes were observed at basic pH. These results could aid to elucidation of their mechanism of action as pH is one of the important factors for bioprocesses passing in living organisms.

• Nuclear Engineering and Technology
• /
• 제53권7호
• /
• pp.2295-2303
• /
• 2021

To investigate wall-thinning impact on axial load resistance of Zircaloy-4 cladding rods after a LOCA transient, axial tensile samples have been machined on as-received tubes with reduced thicknesses between 370 and 580 ㎛. After high temperature oxidation under steam at 1200 ℃ with measured ECR ranging from 10 to 18% and water quenching, machined samples were axially loaded until fracture. These tests were modeled using a fracture mechanics approach developed in a previous study. Fracture stresses are rather well predicted. However, the slightly lower fracture stress observed for wall-thinned samples is not anticipated by this modeling approach. The results from this study confirm that characterizing the axial load resistance using semi-integral tests including the creep and burst phases was the best option to obtain accurate axial strengths describing accurately the influence of wall-thinning at burst region.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권3호
• /
• pp.1-5
• /
• 2019

The superconductor stability theories are consistently described by the integral formula. If the defined stability function is a simple decreasing function, it becomes a cryogenic stability condition. If the stability function has a maximum value and a minimum value, and the maximum value is less than 0, then it is a cold-end recovery condition. If the maximum value is more than 0, it can be shown that the unstable equilibrium temperature, that is, the MPZ (minimum propagation zone) temperature distribution can exist. The MPZ region is divided into two regions according to the current ratio. At the low current ratio, the maximum dimensionless temperature is greater than 1, and at the relatively high current ratio, the maximum dimensionless temperature is less than 1. In order to predict the minimum quench energy, the dimensionless energy was obtained for the MPZ temperature distribution. In particular, it was shown that the dimensionless energy can be obtained even when the MPZ maximum temperature is 1 or more.

• 한국초전도ㆍ저온공학회논문지
• /
• 제8권1호
• /
• pp.34-38
• /
• 2006

There are many parameters that should be considered from the viewpoint of real power system operation and planning in designing HTS power devices. Especially, in the power system with HTS-FCL(fault current limiter) and TR(transformer), there is close correlation between parameters of the HTS power devices. This paper describes some considerations in determining parameters of HTS power devices, which are related to technical and economical aspects. The main parameters in this study are the quench resistance of HTS-FCL and the % impedance of HTS-TR. The results may give basic information for developing the devices.

• 한국초전도ㆍ저온공학회논문지
• /
• 제9권3호
• /
• pp.67-71
• /
• 2007

The electrical insulation design of 600 kJ conduction cooled high-Tc superconducting magnetic energy storage (SMES) have been studied in this paper. The high voltage is applied to both ends of magnet of high-Tc SMES by quench or energy discharge. Therefore. the insulation design of the high voltage needs for commercialization. stability. reliability and so on. In this study. we analyzed the insulation composition of a high-Tc SMES. and investigated about the insulation characteristics of the materials such as Kapton. AIN. $Al_2O_3$. GFRP and vacuum in cryogenic temperature. Base on these results. the insulation design for 600 kJ conduction cooled high-Tc SMES was performed.

• 한국초전도ㆍ저온공학회논문지
• /
• 제10권4호
• /
• pp.29-32
• /
• 2008

The design of a superconducting magnet system producing very high magnetic field is underway at Korea Basic Science Institute (KBSI) to accelerate three kinds of carbon irons (C+2, C+4, C+6) to 120 MeV. A quarter-scaled prototype will be manufactured in order to confirm the feasibility of our design. Magnet Inductances in the system have a great influence on the current ramping rates and contribute to the stored energy, which are usually considered to be unfavorable in magnet operation. The modeling and simulation scheme of a prototype superconducting magnet for the cyclotron K120 is described in this paper. The inductances are calculated by a numerical method with and without iron yokes, respectively. These calculation results will be used as engineering design details such as a current ramping rate and a quench protection design.