• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.637-640
• /
• 2006

In this paper, a microstrip antenna with a small loop consisting of the left and right parallel plate to load capacitor is proposed. It is obtained the improved small size than the antenna of the transformed Uh and the antenna of the left and right parallel plate to load capacitor on QMSA. Equivalent circuit of transmission line model is designed to find more accurate resonant frequency. Also, the designed and fabricated antenna can receive both vertically and horizontally polarized waves to operating frequency of 1.5GHz. Therefore proposed antenna is available as a small antenna for wireless communication and will be quite useful for indoor communication

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.35-38
• /
• 1998

In this paper we fabricated QMSAs for 850MHz band on the teflon substrate with $\varepsilon_1-2.6, $ $t=1.6mm(\pm0.08)(CGP-500).$ We measured the resonant frequency and the return loss with cutting the gap region between radiation patch and ground plate by a 5mm length step by step. As a result we found that the measured data was not so bad unlike other papers when the gap region was closer to zero, especially under 10mm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.6
• /
• pp.1151-1156
• /
• 2001

In this paper, the electric field distribution and directivity on human head caused by portable phone is analyzed. An analysis model is composed of a human head model and the antenna mounted on the same ground plane as portable telephone size. The QMSA to load a capacitor without limitation of the electric force is used In the computational model to apply to the antenna mounted on portable phone. This antenna is designed to operate in the near of frequency 2.0㎓, is observed the radiation characteristics of the antenna and their variations as a function of distance from the human head.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.230-233
• /
• 2001

본 논문에서는 기존의 QMSA에 비해 안테나 전체 길이를 소형화함은 물론 전기력선이 미치는 범위가 제한받지 않도록 그라운드 판을 접어올린 좌측 평행 평판과 방사 패치사이 용량을 장하한 QMSA를 설계ㆍ제작하여 실제의 휴대전화기에 부착해서 안테나의 이득노화요인에 대해서 서술하였다. 안테나 성능 지표로서 휴대전화기케이스의 크기를 그라운드판으로 한 안테나를 설계하여 상용화된 HFSS프로그램에 의해서 리턴로스와 방사패턴등, 각종 손실을 고려한 개략적인 시뮬레이션을 행한 결과를 나타냈다. 또한 인체 근체에서 사용되고 있을 때의 휴대 전화용 안테나의 특성은 다른 사용상황에 있어서 안테나 급전점과 인체머리부분과의 간격, 인체머리부분과 안테나의 각도 등을 고려해서 인체에 미치는 전계강도를 시뮬레이션했다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.7 no.2
• /
• pp.139-146
• /
• 1996

In this paper, the total electric field antenna in the small loop and aperture plane structure to load a capacitance on transformed QMSA(Quarter-wavelength Microstrip Antenna) from MSA(Microstrip Antenna) is proposed, and the total electric field is shown that the calculated value is agreed resonably with experimental value. Itis a smalled antenna of the radiation element and ground plane with equal width. The designed and manufactured antenna can receive borth vertically and horizontally polarised waves to operating frequency of 1.5GHz; therefore this is available as a smalled antenna for wireless telephones and will be quit useful for indoor communication. Also, antenna's equivalent circuit with transmission line model is designed to find more accurate resonant frequency and is calculated return loss value. The calculated value is agreed resonably with experimental value.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.4
• /
• pp.354-362
• /
• 1997

In this paper, a microstrip antenna with a small loop consisting of the left and right parallel plate to load a capacitor is proposed. It is obtained the improved high gain and bandwidth than the antenna consisting of the right parallel plate to load a capacitor on QMSA (Quarter-Wavelength Mi- crostrip Antenna). Also, the designed and manufactured antenna can receive both vertically and horizontally polarised waves to operating frequency of 1.5 GHz; therefore this is available as a small antenna for wireless telephones and will be quite useful for indoor communication.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1427-1434
• /
• 2013

In this paper, triple band mobile chip antenna for DCS(1.71~1.88GHz) / PCS(1.75~1.87GHz) / UPCS(1.85~1.99GHz) on PCB Layout is designed. To analyze the characteristics of the designed antenna, we designed and measured Single, Dual, Triple Band antenna. The designed antenna was fabricated and measured using vector network analyzer in LTK(Laird Technologies Korea). Triple and wide band characteristic could be realized the measured bandwidth(V.S.W.R<2.0) of designed antenna operated in the band of 1.71GHz~1.99GHz. This antenna has a small size of about $19mm{\times}4mm{\times}1.6mm$, narrow bandwidth which is a defect of chip antenna is improved. And its experimental results were a good agreement with simulation performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.1
• /
• pp.23-30
• /
• 2010

In this paper, a design for the 900MHz bandwidth RFID reader antenna with circular polarization is proposed and experimentally investigated. The 900MHz bandwidth RFID reader antenna is proposed as a simple radiator with loading capacitor to generate LHCP(Left Hand Circular Polarization). Also, the design and fabrication of antenna has the returnloss of -32.28dB at the center frequency of 1010MHz and Bandwidth of 12.5% at 905Hz~1030MHz. Proposed LHCP antenna of maximum gain is 6dBi and satisfy axial ratio based on 2. From the measured result, axial ratios based on 2 are observed at the operating frequencies. The proposed antenna is suitable for RFID applications in wireless communications.