• Journal of Korean Society of Forest Science
• /
• v.77 no.1
• /
• pp.73-82
• /
• 1988

This study was excuted to analyze the vegetational community structure of the Hongrudong valley the Mt. Gaya by three kinds of ordination techniques (polar, principal component analysis, reciprocal averaging). Eleven sites were sampled with the clumped method to analyze the vegetation structure. The result suggested that Hongrudong valley forest was divided by Pinus densiflora and Quercus aliena community. The relation between stand scores of ordination and soil pH, humus content, soil moisture had a tendency to increase significantly from P. densiflora to Q. aliena community. RA was the most effective method of this study. RA ordination was showed that successional trends of tree species seem to be from P. densijlora through Q. variabilis to Q. aliena, Carpinus laxiflora in the upper layer and from Lespedeza cyrtobotrva, Rhus spp., Rhododendron schlippenbachii through Fraxinus sieboldiana, Lindera obtusiloba to Euonymus oxyphyllus, Weigela subsessilis, Callicarpa japonica in the middle layer.

• Journal of Korean Society of Forest Science
• /
• v.77 no.2
• /
• pp.166-177
• /
• 1988

To investigate the structure of the plant community of the Naejang Temple District in Mt. Naejang National Park, 22 plots were set up by the vegetation physiognomy and vegetation analysis by four kinds of ordination techniques(PO, PCA, RA and DCA) was carried out. Pure and mixed forest community of Quercus variabilis and Q. mongolica were major forest communities and each of them covered 31.27 and 20.77%, respectively. The degree of human disturbance of vegetation 9, 8, 7 and 6 area covered 30.9, 67.0, 0 and 0.02%, respectively. According to stand dynamic analysis by DBH class distribution, the present Pinus densiflora and Quercus communities may be succeeded to Carpinus laxiflora communities. DCA was the most effective method of this study. DCA ordination showed that successional trends of tree species seem to be from P. densiflora through Q. variabilis, Q. aliena, Sorbus alnifolia, Platycarya strobilacea to Carpinus laxiflora, Fraxinus rhynchophylla, Zelkova serrata, Cornus controversa in the tree layer, and from Rhododendron mucronulatum, Rh. schlippenbachii, Lespedeza cyrtobotrya, Rhus trichocarpa through Styrax japonica, Daphniphyllum macropodum, Sapium japonicum to Euonymus oxyphyllum, E. sieboldiana, Lindera erythrocarpa in the subtree layer.

• Korean Journal of Environment and Ecology
• /
• v.6 no.1
• /
• pp.25-43
• /
• 1992

A survey of Orimok, Yongsil and Donnaeko area forest in Mt. Halla. was conducted using 71 sample plots of 500$m^2$ size. In the analysis of -actual vegetation, Carpinus tschonoskii and C. laxiflora community covered 53.7%, Quercus grosseserrata - Q. serrata community 25.8%, Pinus densiflora community 8.3%, Abies koreana community 4.5% and these communities covered 92.2% of Mt. Halla forest. The degree of 8, 9 and 10 in human disturbance of vegetation covered 64.5, 28.6 and 6.9% respectively. The classification by TWINSPAN and DCA ordination were applied to the study area in order to classify them into several groups based on woody plants and environmental variables. By two techniques, the plant community were divided into several groups by the aspect and altitude. The dividing groups are C. tschonoskii community, C. tschonoskii - Q. serrata community, P. densiflora - C. tschonoskii community, P. densiflora - C. laxiflora community, C. laxiflora community, C. laxifrora - Daphniphyllum macropodum - Eurya japonica community, P. densiflora community. The successional trends of tree species by both techniques seem to be from P. densiflora. Sorbus alnifolia through Q. serrata. Maackia faurier to C. tsihonoskii in Orimok and Yongsil area and from P. densifiora to C. laxiflora in Donnaeko area. There was no difference between the stand scores of. DCA and environmental variables.

• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.425-434
• /
• 2006

The operability and productivity of continuous processes, especially in petrochemical industries have made remarkable improvement during the past twenty years through advanced process control (APC) typified by model-based predictive control. On the other hand, APC have not been actively practiced in industrial batch processes typified by batch polymerization reactors. Perhaps the main cause for this has been the lack of reliable batch process APC techniques that can overcome the unique problems in industrial batch processes. Recently, some noteworthy progress is being made in this area. New high-performance batch process control techniques that can accommodate and also overcome the unique problems of industrial batch processes have been proposed on the basis of iterative learning control (ILC). In this review paper, recent advancement in the batch process APC techniques are presented, with a particular focus on the variations of the so called Q-ILC method, with the hope that they are widely practiced in different industrial batch processes and enhance their operations.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.4
• /
• pp.273-280
• /
• 2012

The numerical simulation using the Lattice Boltzmann Method in the field of computational fluid dynamics becomes wider in the engineering applications because of its simplicity of update rules compared to the conventional Navier-Stokes solvers. Here, a two-dimensional D2Q9 LB model is numerically tested with a few new computational treatment on the free surface. The single relaxation time is applied under the gravitational field where applied only in the higher density fluid because of its big density difference. At the free surface, the reconstruction techniques in combination with boundary conditions is adopted in order to get some distribution function coming into the fluid site from the air one, and surface tension, early stable test for the gravitional field is considered in it. With the implementation of the gravitational profile, conserving the overall mass and grid dependency are observed during the calculations and freesurface advance track is well captured with an experiment.

• Clinical and Experimental Pediatrics
• /
• v.60 no.9
• /
• pp.282-289
• /
• 2017

Purpose: Recent advancements in molecular techniques have greatly contributed to the discovery of genetic causes of unexplained developmental delay. Here, we describe the results of array comparative genomic hybridization (CGH) and the clinical features of 27 patients with global developmental delay. Methods: We included 27 children who fulfilled the following criteria: Korean children under 6 years with global developmental delay; children who had at least one or more physical or neurological problem other than global developmental delay; and patients in whom both array CGH and G-banded karyotyping tests were performed. Results: Fifteen male and 12 female patients with a mean age of $29.3{\pm}17.6months$ were included. The most common physical and neurological abnormalities were facial dysmorphism (n=16), epilepsy (n=7), and hypotonia (n=7). Pathogenic copy number variation results were observed in 4 patients (14.8%): 18.73 Mb dup(2)(p24.2p25.3) and 1.62 Mb del(20p13) (patient 1); 22.31 Mb dup(2) (p22.3p25.1) and 4.01 Mb dup(2)(p21p22.1) (patient 2); 12.08 Mb del(4)(q22.1q24) (patient 3); and 1.19 Mb del(1)(q21.1) (patient 4). One patient (3.7%) displayed a variant of uncertain significance. Four patients (14.8%) displayed discordance between G-banded karyotyping and array CGH results. Among patients with normal array CGH results, 4 (16%) revealed brain anomalies such as schizencephaly and hydranencephaly. One patient was diagnosed with Rett syndrome and one with $M{\ddot{o}}bius$ syndrome. Conclusion: As chromosomal microarray can elucidate the cause of previously unexplained developmental delay, it should be considered as a first-tier cytogenetic diagnostic test for children with unexplained developmental delay.

• Mass Spectrometry Letters
• /
• v.8 no.4
• /
• pp.114-118
• /
• 2017

While saliva can be considered as good biological fluid for monitoring biomarkers due to many advantages including its communication with blood and the non-invasive nature during its sampling, its applications to that purpose is still limited. As a part of efforts to expand the applications of saliva to the protein biomarker research, we carried out global absolute quantitation of proteins in human whole saliva (WS) by bottom-up proteomics techniques mainly based on nLC-Q-IMS-TOF employing $MS^E$. From the analyses of a pooled WS sample collected from 22 healthy Korean volunteers, 93 proteins ranging from $5.89{\times}10^1ng/mL$ (immunoglobulin heavy chain) to $1.59{\times}10^4ng/mL$ (${\alpha}-amylase$ 1) were confirmed. For the validation of the present results, human serum albumin in the same sample was quantitated by ELISA and its result was compared with that from the nLC-Q-IMS-TOF study. As a result, there was no significant difference between two results from individual approaches ($1.18{\times}10^4{\pm}0.03{\times}10^4 ng/mL$ from nLC-Q-IMS-TOF experiments vs. $1.23{\times}10^4{\pm}0.07{\times}10^4ng/mL$ from ELISA experiments, n=3, p=0.309). To our knowledge, this is the first global absolute quantitation of proteins in human whole saliva and information from the present study can be widely used as the first level reference for the discovery of new protein biomarkers from human whole saliva as well as for quantitative applications of human whole saliva proteins.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.10 no.1
• /
• pp.47-61
• /
• 2015

Objectives : The purpose of this study is body parameters characteristics through posture analysis system of musculoskeletal problem patient Methods : Posture analysis system were performed for 164 patients to measure body parameters such as Q-angle, body inclination, neck inclination, PCMT(posterior cervical muscle tension), Knee flexion and posture balance. Statistical analysis using statistical analysis techniques and Pearson correlation coefficients was performed to assess the body parameters obtained by posture analysis system. Results : More than half of people out of 164 reported low back pain, 34.8% of the total was found to have neck pain. There was not a significant difference between genders from the characteristics of gender based body parameters expect for the statistical difference in Q angle, PCMT. There was a significant correlation between low back pain and multiple response status. There was a significant correlations between knee pain and Q angle. Also There was a significant correlations between pelvic pain and posture balance of ankle. Conclusions : Posture analysis system can be used to perform the analysis in place of X-ray measuring body posture and clinical parameters. The results of this study are expected to be the basis for further research on the clinical application of posture analysis system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.05a
• /
• pp.65-67
• /
• 2013

The recent high-performance network equipment is required, and also require high network bandwidth utilization. It is a trend to develop increasingly using multi-core processors for high-performance network servers. Propose a method to improve the performance of the network sub-system, considering the characteristics of multi-core as a way to improve these high-performance and high network throughput. In this paper, we confirm through experiments on how to improve the communication performance, optimize performance and take full advantage of multi-core by Network communication process to improve the performance of the multi-core processor architecture, the process of concentration, the overhead for each core, based on network traffic according to the interrupt affinity in this process to determine the optimal core to give. The experiments were implemented in the Linux kernel, and experiments to improve the network throughput up to 30%, bringing reduces the Linux communication process to improve the performance of the processor overhead of up to 10%.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.3
• /
• pp.647-655
• /
• 2008

Microsomal prostaglandin E2 synthase (mPGES-1) is a potent target for pain and inflammation. Various QSAR (quantitative structure activity relationship) analyses used to understand the factors affecting inhibitory potency for a series of MK886 analogues. We derived four QSAR models utilizing various quantum mechanical (QM) descriptors. These QM models indicate that steric, electrostatic and hydrophobic interaction can be important factors. Common pharmacophore hypotheses (CPHs) also have studied. The QSAR model derived by best-fitted CPHs considering hydrophobic, negative group and ring effect gave a reasonable result (q2 = 0.77, r2 = 0.97 and Rtestset = 0.90). The pharmacophore-derived molecular alignment subsequently used for 3D-QSAR. The CoMFA (Comparative Molecular Field Analysis) and CoMSIA (Comparative Molecular Similarity Indices Analysis) techniques employed on same series of mPGES-1 inhibitors which gives a statistically reasonable result (CoMFA; q2 = 0.90, r2 = 0.99. CoMSIA; q2 = 0.93, r2 = 1.00). All modeling results (QM-based QSAR, pharmacophore modeling and 3D-QSAR) imply steric, electrostatic and hydrophobic contribution to the inhibitory activity. CoMFA and CoMSIA models suggest the introduction of bulky group around ring B may enhance the inhibitory activity.