• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.17 no.5
• /
• pp.95-100
• /
• 2008

An active micro-mixer, which is composed of an oscillating micro-stirrer in the micro-channel to provide effective mixing was optimized. The effects of molecular diffusion and disturbance by the stirrer were considered with regard to two types of mixer models: the simple straight micro-channel and micro-channel with an oscillating stirrer. Two types of mixer models were studied by analyzing mixing behaviors such as their interaction after the stirrer. The mixing was calculated by Lattice Boltzmann methods using the D2Q9 model. In this study, the time-averaged mixing index formula was used to estimate the mixing performance of time-dependent flow. The mixing indices of the two models were compared. From the results, it was found that the mixer with an oscillating stirrer was much more enhanced and stabilized. Therefore, an approximate optimization of an active micro-mixer with an oscillating stirrer was performed using Kriging method with OLHD(Optimal Latin Hypercube Design) in order to determine the optimal design variables. The design parameters were established as the frequency, the length and the angle of the stirrer. The optimal values were obtained as 1.0346, 0.66D and $\pm45^{\circ}$, respectively. It was found that the mixing index of the optimal design increased by 88.72% compared with that of the original design.

• The Korean Journal of Applied Statistics
• /
• v.28 no.6
• /
• pp.1227-1234
• /
• 2015

Traditional criteria for optimum experimental designs depend on the specifications of the model; however, there will be a dilemma when we do not have perfect knowledge about the model. Box and Draper (1959) suggested one direction to minimize bias that may occur in this situation. We will demonstrate some examples with exact solutions that provide a no-bias design for polynomial regression. The most interesting finding is that a design that requires less bias should allocate design points away from the border of the design space.

• Smart Media Journal
• /
• v.7 no.2
• /
• pp.9-14
• /
• 2018

The k-ary n-cube $Q^k_n$ is widely used in the design and implementation of parallel and distributed processing architectures. It consists of $k^n$ identical nodes, each node having degree 2n is connected through bidirectional, point-to-point communication channels to different neighbors. On $Q^k_n$ we would like to transmit packets from a source node to 2n destination nodes simultaneously along paths on this network, the $i^{th}$ packet will be transmitted along the $i^{th}$ path, where $0{\leq}i{\leq}2n-1$. In order for all packets to arrive at a destination node quickly and securely, we present an $O(n^3)$ routing algorithm on $Q^k_n$ for generating a set of one-to-many node-disjoint and nearly shortest paths, where each path is either shortest or nearly shortest and the total length of these paths is nearly minimum since the path is mainly determined by employing the Hungarian method.

• Proceedings of the KIEE Conference
• /
• 1995.11a
• /
• pp.3-8
• /
• 1995

Since Interior Permanent Magnet syncronous Motor has a structure whose magnet is inserted in the rotor, d, q inductance is differ and the motor products hybrid torque combined allignment term and reluctance term. Air gap flux density and d, q axis inductances of the Interior Permanent Magnet Synchronous Motor obtained by analytical method are compensated using Finite Element Method. For optimal design, the efficiency of the motor is taken as the objective function, and Genetic Algorithm finds the value of design parameters which maximize the objective function.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.579-583
• /
• 2012

The Design of Experiment (DOE) is a most practical technique when establishing an optimal condition for production technology in Six Sigma innovation project. This research proposes the assessment of properties of error terms, such as normality, equal variance, unbiasedness and independence. The properties of six nonparametric ranking techniques for checking normality assumption are discussed as well as run test which is used to identify the randomness, and to check unbiased assumption. Furthermore, Durbin-Watson (DW) statistics and ARIMA (p,d,q) process are discussed to identify the serial correlation.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.20 no.43
• /
• pp.25-36
• /
• 1997

The purpose of this paper is to structure a new integrated model that can minimize the total cost for the transportation and inventory systems between m origin points, where origin i has a supply of a commodity, such as distribution centers or warehouses, and n destination points, where destination j requires the commodity. In this case, demands of the destination points are assumed random variables which have a known probability distribution. We will find optimal distribution centers which transport the commodity to the destination points and suggest optimal inventory policy to the selected distribution center which find the optimal pair $$ and safety stock level that minimize total cost with back-ordered case. This new model is formulated as a 0-1 nonlinear integer programming problem. To solve the problem, this paper proposes heuristic computational procedures and program and provides numerical examples.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.1
• /
• pp.45-52
• /
• 2021

The space vector control based voltage control method for a three-phase PWM rectifier requires a lot of effort to design an optimal switching pattern since a switching pattern for the switching section must be designed. In this study, a D-Q control based SPWM output voltage control algorithm was studied for the three-phase six-pulse CVS type rectifier. In the output voltage control algorithm, three-phase reference signals are obtained from the D-Q transformation based on the space vector representation method, instead of the switching pattern, SPWM method is used to generate rectifier switching control signals. Next, a three-phase six-pulse CVS PWM rectifier based on D-Q transformation and SPWM was modeled using EMTP-RV. Finally, the validity of the D-Q control-based SPWM voltage control algorithm was confirmed by comparing the output voltage waveform obtained through EMTP-RV simulation works with a reference value and confirming that the output voltage accurately follows the reference voltage.

• Steel and Composite Structures
• /
• v.35 no.1
• /
• pp.129-145
• /
• 2020

In typical, structural topology optimization plays a significant role to both increase stiffness and save mass of structures in the resulting design. This study contributes to a new numerical approach of topologically optimal design of Mindlin-Reissner plates considering Winkler foundation and mathematical formulations of multi-directional variable thickness of the plate by using multi-materials. While achieving optimal multi-material topologies of the plate with multi-directional variable thickness, the weight information of structures in terms of effective utilization of the material at the appropriate thickness location may be provided for engineers and designers of structures. Besides, numerical techniques of the well-established mixed interpolation of tensorial components 4 element (MITC4) is utilized to overcome a well-known shear locking problem occurring to thin plate models. The well-founded mathematical formulation of topology optimization problem with variable thickness Mindlin-Reissner plate structures by using multiple materials is derived in detail as one of main achievements of this article. Numerical examples verify that variable thickness Mindlin-Reissner plates on Winkler foundation have a significant effect on topologically optimal multi-material design results.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.5
• /
• pp.380-388
• /
• 2002

This paper describes the optimum design for low-pressure steam turbine rotor of 1,000 MW nuclear power plant by using a combined genetic algorithm, which uses both a genetic algorithm and a local concentrate search algorithm (e.g. simplex method). This algorithm is not only faster than the standard genetic algorithm but also supplies a more accurate solution. In addition, this algorithm can find the global and local optimum solutions. The objective is to minimize the resonance response (Q factor) and total weight of the shaft, and to separate the critical speeds as far from the operating speed as possible. These factors play very important roles in designing a rotor-bearing system under the dynamic behavior constraint. In the present work, the shaft diameter, the bearing length, and clearance are used as the design variables. The results show that the proposed algorithm can improve the Q factor and reduce the weight of the shaft and the 1st critical speed.

• Journal of the Korean Vacuum Society
• /
• v.14 no.3
• /
• pp.126-131
• /
• 2005

Small-angle neutron scattering (SANS) is a very powerful techniques for nanostructure characterization. In this paper, we report the conceptual design and technical description of the 40 in small angle neutron scattering (SANS) insoument which is being developed by KAIST and KAERI for installation at 30 MW HANARO research reactor. For the optimal design of 40 m SANS, a series of computer simulation were pe.to.mod. The Q-.ange of the 40m SANS inst.ument is $0.0005\;\AA^{-1}-1.0\AA^{-1}$ which is a world top-class SANS Q-range. When the cold neutron spectrum used in the simulation is realized, the neutron flux at sample position is expected to be comparable to the current state-of-art SANS instrument in the world.