• Journal of the Microelectronics and Packaging Society
• /
• v.10 no.1
• /
• pp.19-24
• /
• 2003

A very small size 2.4 GHz ISM band BPF(Band Pass Filter) is realized using LTCC Multi-layer technology. Proposed design method enables to achieve BPF size $2.0\times1.2\times0.8mm^3$. A $lambda/4$ resonator with shunt-to-ground loaded capacitor is used to shorten resonator length, achieving higher quality factor. Also this resonator enables BPF to improve out-of-band rejection. Coupling coefficients between coupled strip-line resonators and external quality factor (Qe) of a resonator are derived and applied to the filter design. The measured results show good agreement with simulated data.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.298-300
• /
• 2004

An alternative molecular porphyrin-phthalocyanine aggregate was prepared and characterized with UV-visible and X-ray absorption spectroscopies. UV-visible experiments evidence 1-dimensional porphyrin-phthalo-cyanine array formed by mixing $SnTPPCl_2 ({\lambda}_{max}=429,\;{\varepsilon}=2.4{\times10^ 5 /M{\cdot}cm)\;and\;NiPc(OBu)_8({\lambda}_{max}=744 nm,\;{\varepsilon}= 2.0{\times}10^ 5 /M{\cdot}cm)$ in solution. In the UV-visible spectrum of the porphyrin-phthalocyanine array, $(SnPNiPc)_n$, a new Q-band appeared at 844 nm with decrease of the Q-band peak of $NiPc(OBu)_8$ at 744 nm. The red-shift of Q-band evidences an alternative porphyrin-phthalocyanine array formed in solution through metal-halide interaction rather than ${\pi}-{\pi}$ facial interaction, in which nickel of $NiPc(OBu)_8$ coordinates with chloride of $SnTPPCl_2$ through self assembly. Ni K-edge XANES (X-ray absorption near edge structure) spectra also support the axial ligation of nickel to chloride. The square planar structure of $NiPc(OBu)_8$ turns to an octahedral structure in (SnPNiPcSnP) by axial ligation. A higher energy-shift (0.2 eV) of the preedge peak of (SnPNiPcSnP) indicaties partial oxidation of nickel by charge transfer from NiPc$(OBu)_8$ to SnTPPCl$_2$.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1054-1057
• /
• 2002

The design and fabrication of Q-band 3-stage monolithic microwave integrated circuit(MMIC) amplifier for WLAN are presented using 0.2$\square$ AIGaAs/lnGaAs/GaAs pseudomorphic high electron mobility transistor (PHEMT). In each stage of the MMIC, a negative feedback is used for both broadband and good stability. The measurement results are achieved as an input return loss under -4dB, an output return loss under -10dB, a gain of 14dB, and a PldB of 17dBm at Q-band(36～44GHz). These results closely match with design results. The chip size is 2.8${\times}$1.3mm$^2$. This MMIC amplifier will be used as the unit cell to develop millimeter-wave transmitters for use in wideband wireless LAN systems.

• International Journal of Aeronautical and Space Sciences
• /
• v.16 no.3
• /
• pp.445-450
• /
• 2015

Generally, Low Earth Orbit (LEO) satellites are used to collect image or video from earth's surface. The collected data are stored on-board and/or transmitted to the main ground station directly or via polar ground station using terrestrial line. Today, an intersatellite link between a LEO and a GEO satellite allows transmission of the collected data to the main ground station through the GEO satellite. In this study, an approach for a continuous communication starting from LEO through GEO to ground station is proposed by determining the optimum ground station locations. In doing so, diverse ground stations help to determine the GEO orbit as well. Cross-correlation of the long term daily rainfall averages are multiplied with the logarithmic correlation of the sites to calculate the joint correlation of the diverse ground station locations. The minimum values of this joint correlation yield the optimum locations of the ground stations for Q/V-band communication and satellite control operations. Results for several case studies are listed.

• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1506-1508
• /
• 2005

VCO(voltage controlled oscillator) using mobile communication device decides direct characteristics as parts that affect important in stable oscillation and distortion characteristics of system. VCO used 900 MHz band was designed by the transformation of Colpitts circuit form use ADS that consider Q-factor to minimize phase noise. VCO manufactured together evaluation board and voltage control oscillator to FR-4 PCB. VCO experimented chracteristics after control through resonance department tuning. In our research, the designed VCO has 15.5 dBm output level at the bias condition of 6V and 10mA and the operating frequency range of 917 MHz$\sim$937 MHz band. Phase noise is -98.28 dBc/Hz at 1 MHz frequency offset from the carrier.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.5
• /
• pp.69-76
• /
• 2004

In this paper, a VCDRO (Voltage Control Dielectric Resonator Oscillator) with low phase noise for X-band application has been designed and fabricated. A low noise and low flicker noise MESFET and a high Q dielectric resonator were selected to obtain good phase noise Performance. Also, a varactor diode having high Q, qualify factor was used to reduce the loading effects and a big Gamma of diode was chosen for linearity of frequency over voltage tuning range. The fabricated circuits was simulated with circuit design tools, ADS to provide the optimum performances. As the measured results of fabricated oscillator, the output power was 5.8 ㏈m at center frequency 12.05㎓ and harmonic suppression -30㏈c, phase noise -114 ㏈c at 100 KHz offset frequency, respectively, and the frequency tuning range as the function of valtage applied to varactor diode was 15.2 MHz and its power variation with frequency was 0.2 ㏈. This oscillator could be available to a local oscillator in X-band.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.2
• /
• pp.67-71
• /
• 2012

In this paper, a push-push oscillator at K-band with a double H-shape metamaterial resonator (DHMR) based on high-Q is proposed with metamaterial structure to improve the phase noise and output power. The proposed oscillator shows low phase noise and high output power. DHMR is designed to be high-Q at resonance frequency through strong coupling of E-field. oscillators which are combined in push-push structure improve output power. The propose push-push oscillator shows the output power of 3.1 dBm, the fundamental signal suppression of -23.7 dBc and phase noise of -116.28 dBc at 100 kHz offset frequency and 20.20 GHz center frequency.

• Dementia and Neurocognitive Disorders
• /
• v.21 no.4
• /
• pp.126-137
• /
• 2022

Background and Purpose: Early detection of subjective cognitive decline (SCD) due to Alzheimer's disease (AD) is important for clinical research and effective prevention and management. This study examined if quantitative electroencephalography (qEEG) could be used for early detection of AD in SCD. Methods: Participants with SCD from 6 dementia clinics in Korea were enrolled. ¹⁸F-florbetaben brain amyloid positron emission tomography (PET) was conducted for all the participants. qEEG was performed to measure power spectrum and source cortical activity. Results: The present study included 95 participants aged over 65 years, including 26 amyloid PET (+) and 69 amyloid PET (-). In participants with amyloid PET (+), relative power at delta band was higher in frontal (p=0.025), parietal (p=0.005), and occipital (p=0.022) areas even after adjusting for age, sex, and education. Source activities of alpha 1 band were significantly decreased in the bilateral fusiform and inferior temporal areas, whereas those of delta band were increased in the bilateral cuneus, pericalcarine, lingual, lateral occipital, precuneus, posterior cingulate, and isthmus areas. There were increased connections between bilateral precuneus areas but decreased connections between left rostral middle frontal area and bilateral frontal poles at delta band in participants with amyloid PET (+) showed. At alpha 1 band, there were decreased connections between bilateral entorhinal areas after adjusting for covariates. Conclusions: SCD participants with amyloid PET (+) showed increased delta and decreased alpha 1 activity. qEEG is a potential means for predicting amyloid pathology in SCD. Further longitudinal studies are needed to confirm these findings.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.651-659
• /
• 2010

In this paper, a new six-port direct conversion receiver for high-speed multi-band multi-mode wireless communication system such as software defined radio(SDR) is proposed. The designed receiver is composed of two CMOS four-port BPSK receivers and a dual-band one-stage polyphase filter for quadrature LO signal generation. The four-port BPSK receiver, implemented in 0.18 ${\mu}m$ CMOS technology for the first time in microwave-band, is composed of two active combiners, an active balun, two power detector, and an analog decoder. The proposed polyphase filter adopt type-I architecture, one-stage for reduction of the local oscillator power loss, and LC resonance structure instead of using capacitor for dual-band operation. In order to extent the operation RF bandwidth of the proposed six-port receiver, we include I/Q phase and amplitude calibration scheme in the six-port junction and the power detector. The calibration range of the phase and amplitude mismatch in the proposed calibration scheme is 8 degree and 14 dB, respectively. The validity of the designed six-port receiver is successfully demonstrated by modulating M-QAM, and M-PSK signal with 40 Msps in the two-band of 900 MHz and 2.4 GHz.

• Journal of information and communication convergence engineering
• /
• v.8 no.3
• /
• pp.307-311
• /
• 2010

EPCglobal Class-1 Gen-2 protocol has been proposed for UHF-band RFID systems. In Gen-2 standard, Q-algorithm was proposed to select a frame size for the next query round without estimating the number of tags. Therefore, the Q-algorithm has advantage that the reader's algorithm is simpler than other algorithms. However, it is impossible to allocate the optimized frame size. Also, the original Q-algorithm did not define an optimized parameter C for adjusting the frame size. In this paper, we propose an adaptive Q-algorithm with the different parameter $C_c$ and $C_i$ in accordance with the status of reply slot. Simulation results show that the proposed adaptive Q-algorithm outperforms the original Gen-2 Q-algorithm.