• Journal of Ecology and Environment
• /
• v.37 no.3
• /
• pp.113-122
• /
• 2014

The purpose of this study is to compare soil $CO_2$ efflux between burned and unburned sites dominated by Pinus densiflora forest in the Samcheok area where a big forest fire broke out along the east coast in 2000 and to measure soil $CO_2$ efflux and environmental factors between March 2011 and February 2012. Soil $CO_2$ efflux was measured with LI-6400 once a month; the soil temperature at 10 cm depth, air temperature, and soil moisture contents were measured in continuum. Soil $CO_2$ efflux showed the maximum value in August 2011 as 417.8 mg $CO_2m^{-2}h^{-1}$ (at burned site) and 1175.1 mg $CO_2m^{-2}h^{-1}$ (at unburned site), while it showed the minimum value as 41.4 mg $CO_2m^{-2}h^{-1}$ (at burned site) in December 2011 and 42.7 mg $CO_2m^{-2}h^{-1}$ (at unburned site) in February 2012. The result showed the high correlation between soil $CO_2$ efflux and the seasonal changes in temperature. More specifically, soil temperature showed higher correlation with soil $CO_2$ efflux in the burned site ($R^2$ = 0.932, P < 0.001) and the unburned site ($R^2$ = 0.942, P < 0.001) than the air temperature in the burned site ($R^2$ = 0.668, P < 0.01) and the unburned site ($R^2$ = 0.729, P < 0.001). $Q_{10}$ values showed higher sensitivity in the unburned site (4.572) than in the burned site (2.408). The total soil $CO_2$ efflux was obtained with the exponential function between soil $CO_2$ efflux and soil temperature during the research period, and it showed 2.5 times higher in the unburned site (35.59 t $CO_2ha^{-2}yr^{-1}$, 1 t = $10^3$ kg) than in the burned site (14.69 t $CO_2ha^{-2}yr^{-1}$).

• Geotechnical Engineering
• /
• v.14 no.5
• /
• pp.163-172
• /
• 1998

To study the carrying capacity behavior of pile, dynamic pile testis and static load tests were carried out on two instrumented piles during and some time after pile driving. Cone Penetration Test( CPT) and Standard Penetration Test(SPT) were also performed at the test site before pile tests to investigate the relationship between unit skin friction of piles and cone tip resistance values and SPT N values. Total static capacity of pile reached the ultimate stage at the pile head settlement of about 0.055D (D : Pile diameter), at which skin friction of Pile already Passed the maximum value, but the end bearing was still increasing with the pile head settlement. The carrying capacity of pile increased in the form of natural logarithmic function with the time after pile driving. The increase in skin friction with time was very substantial the increase in skin friction 40 days after pile driving was 4.6 times of that determined during pile driving. The contribution of skin friction to the total capacity twas insignificant in the beginning, but became substantial 40 days after pile driving. This implies that the tested pile initially responded as an end bearing pile and later behaved as a friction pile. It was also noted that unit skin friction of pile might be ielated to cone tip resistance values(q.) and SPT N values, though the coefficient of this relationship might differ from one soil group to another and was somewhat greater than the value used in the design practice of Korea.

• Journal of the Korean Ceramic Society
• /
• v.36 no.12
• /
• pp.1350-1355
• /
• 1999

Sintering characteristics and dielectric properties of low temperature sinterable Glass/Ceramic dielectric materials were investigated. The dielectric materials which were developed for microwave frequency applications consist of SiO2-TiO2-Bi2O3-RO system(RO:BaO-CaO-SrO) crystallizable glass and Al2O3 as a ceramic filler. Sintering experiments showed that no more densification occurred above 80$0^{\circ}C$ and bulk density and shrinkage depended on Al2O3 content only. Results of dielectric measurements showed that $\varepsilon$r Q$\times$f and $\tau$f of the material containing 30wt% Al2O3 were 17.3, 600 and +23 ppm respectively. Those values for 45 and 60wt% Al2O3 samples were 11.6, 1400, +0.7 ppm and 7.2, 2000, -8.5 ppm, repectively. The results clearly showed that the Glas/Ceramic materials of present experiment decreased in $\varepsilon$r and increased in $\times$f value and changed from positive to negative value in $\tau$f value with the increasement of Al2O3 content.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.499-503
• /
• 2002

In this study, to develop the high power piezoelectric transformer for adaptor, PSN-PNN-PZT system ceramics were formulated as a function of $MnO_2$ addition and its dielectric and piezoelectric characteristics were investigated. Multi-layer piezoelectric transformer using an excellent composition was also fabricated and its electrical properties evaluated. The composition ceramics added to 0.5wt%$MnO_2$ showed the maximum value of $k_p=0.61$ and $Q_m=1.321$. As the output power of piezoelectric transformer is increased, its temperature rise increased. At the fixed 18W output power, the transformer was stably operated.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.4
• /
• pp.326-329
• /
• 2004

Corynebacterium acetoacidophilum RYU3161 was cultivated in a L-histidine-limited fed-batch culture. To investigate the effect of cell growth on the L-proline production, 5 L fed-batch culture was performed using an exponential feeding rate to obtain the specific growth rates $(\mu)$ of 0.04, 0.06, 0.08, and 0.1 $h_1$. The results show that the highest production of L-proline was obtained at $\mu$ = 0.04 $h_1$. The specific L-proline production rate $(Q_p)$ increased pro-portionally as a function of the specific growth rate, but decreased after it revealed the maxi-mum value at $\mu$ = 0.08 $h_1$. Thus, the highest productivity of L-proline was 1.66 g $L^-^1 h^-^1$ at $\mu$ = 0.08 $h_1$. The results show that the production of L-proline in C. acetoacidophilum RYU3161 has mixed growth-associated characteristics.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.300-304
• /
• 2002

We fabricated thick film monopole antennas using Mo-doped $BiNbO_{4}$ ceramics and investigated their electrical properties as a function of the Mo-doping concentration. Compared with undoped $BiNbO_{4}$ ceramics, 10 at.% Mo-doping improved microwave dielectric properties of ceramics by increased sintered density as well as decreased space charge density. Further increase in the Mo-doping concentration caused formation of $Bi_{2}MoO_{6}$ phases, resulting in deterioration of the microwave characteristics. The gain and bandwidth of the ceramic monopole antenna were also greatly affected by the Mo-doping concentration. When Mo-doping concentration was 10 at%, highest gain of ~0.7dBi with lowest bandwidth of 30% at 2.3GHz was obtained.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.3 s.22
• /
• pp.73-82
• /
• 2005

This paper describes shock waveform synthesis methods for a shock response spectnlm over a short time interval with which intereference between parts within a test item is increased to perform a sufficient shock test for damage or malfunction which may be caused by the interference between parts, and a digital filter for obtaining a shock response history required for the shock waveform synthesis and a digital inverse filter for restoration by inversely using the digital filter. The time at which the maximax value occurs in the response history is detected in order to establish a delay time which is one of the parameters in the wavelet, on the condition that the natural frequency of SDOF system with a Q (quality factor) of 10 equals to the wavelet frequency of the zero delay wavelet input. A shock response spectrum over a short time interval and an abrupt change in the acceleration for an instant are illustrated as features of the synthesized waveform.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.4
• /
• pp.281-287
• /
• 1998

$BiNbO_4$ ceramics doped with 0.07wt% $V_2O_5$ and 0.03wt% CuO (BNC3V7) were sucessfully sintered at $900^{\circ}C$ through the firing process with Ag electrode. The BNC3V7 shows typically Dielectric constant of 44.3, Thermal Coefficient of resonance Frequency(TCF) of 2 ppm/$^{\circ} and $Qxf_o$ value of 22,000 GHz. The laminated chip Low Pass Filter (LPF) is very sensitive to chip processing parameters, was confirmed by the computer simulation as a function of Q(Quality factors), filter size, capacitor layer thickness, inductor pattern widths. The multilayer type LPF was fabricated by screen-printing with Ag electrode after tape casting and then compared with the simulated characteristics. The results show that characterization of band pass width was similar to that of designed ones.

• Journal of applied mathematics & informatics
• /
• v.42 no.2
• /
• pp.367-377
• /
• 2024

Let G = (V, E) be a graph with p-vertices and q-edges and let R^◦ be a finite zero ring of order n. An injective function f : V (G) → {r₁, r₂, _…, r_k}, where r_i ∈ R^◦ is called vertex pair sum k-zero ring labeling, if it is possible to label the vertices x ∈ V with distinct labels from R^◦ such that each edge e = uv is labeled with f(e = uv) = [f(u) + f(v)] (mod n) and the edge labels are distinct. A graph admits such labeling is called vertex pair sum k-zero ring graph. The minimum value of positive integer k for a graph G which admits a vertex pair sum k-zero ring labeling is called the vertex pair sum k-zero ring index denoted by 𝜓_pz(G). In this paper, we defined the vertex pair sum k-zero ring labeling and applied to some graphs.

• Journal of Korean Academy of Nursing
• /
• v.35 no.3
• /
• pp.546-554
• /
• 2005

Purpose: This study was a systematic review and meta-analysis of the effects of exercise programs in patients with type II diabetes mellitus. Method: Two investigators systematically searched and reviewed English articles from PUBMED from 1988 to 2004, selecting randomized controlled trials on structured exercise programs for DM patients. Out of 87 studies identified, a meta analysis was done for eleven studies which satisfied inclusion criteria and focused on glycemic indices, lipid indices, and cardiac function indices. Results: The means and standard deviations were compared for experimental groups that received exercise-only or exercise and diet programs and control groups that received no intervention or only diet education. The groups were considered homogeneous as the p value of the Q score in each variable group was over 0.05. The experimental groups demonstrated a moderate positive effect on HbA,c and $VO_{2max}$ (d=0.55 & 0.5), and a small positive effect on fasting blood glucose and cholesterol (d=0.38 & 0.27) compared to the control groups. HDL and LDL cholesterol levels, however, showed a very low positive effect (d=0.11 & 0.12) in the experimental groups. Aerobic exercise was more beneficial than resistance exercise on $HbA_1c$ (d=0.59 vs 0.28) in the groups. Conclusions: Regular exercise has a positive effect on $HbA_1c$, fasting blood glucose, total cholesterol, HDL cholesterol, LDL cholesterol, and $VO_{2max}$ in Type 2 diabetic patients.