• Journal of the Korean Geotechnical Society
• /
• v.25 no.8
• /
• pp.77-93
• /
• 2009

The load distribution and deformation of rock socketed drilled shafts subjected to axial loads were evaluated by a load transfer approach. The emphasis was laid on quantifying the end bearing load transfer characteristics of rock socketed drilled shafts based on 3D Finite Difference (FD) analysis performed under varying rock strength and rock mass conditions. From the results of FD analysis, it was found that the ultimate unit toe resistance ($q_{max}$) was influenced by both rock strength and rock mass conditions, while the initial tangent of end bearing load transfer curve ($G_{ini}$) was only dependent on rock strength. End bearing load transfer function of drilled shafts socketed in rock was proposed based on the FD analysis and the field loading tests which were performed on weathered rock in South Korea. Through the comparison with the results of the field loading tests, it is found that the load transfer curve by the present study is in good agreement with the general trend observed by field loading tests, and thus represents a significant improvement in the prediction of load transfer behavior of drilled shaft.

• Progress in Medical Physics
• /
• v.17 no.4
• /
• pp.232-237
• /
• 2006

The aim of this study was to develop the calculation algorithm of source strength of Ir-192 source In terms of the absorbed dose to water instead of an apparent activity (Ci). For this work the Multi Purpose Brachytherapy Phantom(MPBP) was developed, which was designed to locate the source and the chamber precisely at a specific position Inside the water phantom. The reference point of measurement was set at the 5 cm distance along the transverse axis of the source. For a brachytherapy source calibration, the absorbed dose to water calibration factor ($N_{D.W.Q}$) of an lonization chamber were determined and then apply standard protocols of absorbed dose to water. The calibration factor ($N_{D.W.Q}$) of the ion chamber (TM30013, PTW, Germany) was determined using the EGSnrcCPP Monte Carlo Code. The calculated calibration factor ($N_{D.W.Q}$) was 5.28 cGy/nC. The calculated factor was then used to determine the absorbed dose to water from which the air kerma strength for an Ir-192 source can be easily derived at the reference point (5 cm). The calculated air kerma strength showed discrepancies of -0.6% to +1.8% relative to the air kerma strength provided by the vendor, In this work we demonstrated that the air kerma strength ($S_k$) could be determined from the absorbed dose to water calibration factor for Ir-192 source. In audition, this source calibration method could be applied directly to the dose Calculation formalism of AAPM report TG-43.

• Korean Journal of Environment and Ecology
• /
• v.38 no.3
• /
• pp.293-309
• /
• 2024

This study was conducted to provide basic data on the structure of the Carpinus turczaninowii community and the characteristics of the habitat environment for ex situ conservation. To identify the current ecological environment, 27 plots (each measuring 100m²) were selected for analyzing the detailed structure of plant communities in Anmyondo Isl.(Jungjangri San 14-217), Hwanggumsan Mt., Gayasan Mt.(Wonhyobong) and Palbongsan Mt.. The research methodology employed in this study was qualitative analysis. The TWINSPAN classification yielded a total of seven distinct communities. Group I represents the C. turczaninowii - Quercus mongolica community, Group II represents the C. turczaninowii - Pinus densiflora community, Group III represents the C. turczaninowii - P. densiflora community, Group IV represents the C. turczaninowii - Q. mongolica community, Group V represents the C. turczaninowii - Q. variabilis community, Group VI represents the C. turczaninowii - Prunus serrulata Lindl. var. pubescens community, and Group VII represents the C. turczaninowii - Styrax japonicus community. The species diversity ranged from 0.8056 to 1.1568, the importance value ranged from 0.1214 to 0.3024, and the similarity index ranged from 9.37% to 36.36%. Based on the correlation analysis of six environmental factors for the seven communities using RDA ordination, the results indicate that on the first axis, Altitude, Crown density, Bare rock, and Slope exhibited a positive correlation. In the C. turczaninowii - P. densiflora community (Group III) and C. turczaninowii - Q. mongolica community (Group IV), altitude, bare rock, and slope were analyzed as factors influencing vegetation distribution. In the C. turczaninowii - Q. variabilis community (Group V), C. turczaninowii - P. serrulata Lindl. var. pubescens community (Group VI), and C. turczaninowii - S. japonicus community (Group VII), crown density was analyzed as a factor influencing vegetation distribution.

• Journal of Korean Biological Nursing Science
• /
• v.7 no.1
• /
• pp.29-46
• /
• 2005

Purpose ; 본 연구는 X-염색체와 관련된 장애 중에서 가장 흔하고 심한 Duchenne Muscular Dystrophy(DMD)의 세포유전학 및 분자유전학적 특성을 설명하기 위해서 DMD에 영향을 받고 있는 두 가계의 13명을 대상으로 가계도 분석과 염색체 분석 및 DNA 분석을 하였다. Method ; DNA분석은 DNA probe을 이용한 Southern blotting method로써 RFLPs와 DMD유전자 부위의 exon소실 유무를 조사하여 아래와 같은 결과를 얻었다. Conclusion ; A 염색체 분석 : 말초혈액과 양수를 표본으로 High-Resolution GTG염색에서 A가계와 B가계의 염색체 분석에서 12명의 염색체는 정상 X-염색체였으나 B가계의 I-2(DMD여성)에서 46, x,-x,+t(2:x)(q 21.1 : p21.2)로 나타난다. B. DNA분석3 : 1) RFLPs의 분석 J66,XJ-1.1,754-11로써 B가계의 RELPs(Restriction Fragment Length Polymorphisms)에서 J66/Pst I은 1.7hb(E), 1.6kb(e)을 보여 주었고 XJ-1.1/Taq I은 3.6kb(F), 3.0kb(f), 754-11/EoR I은 4.2kb(G), 2.0kb(g)의 대립인자를 나타내었다. 이상의 결과를 바탕으로 영향을 받고 있는 남자 (II-2)의 haplotype는 보인자인 어머니의 한쪽 인자를 받았으며 어머니와 딸은 보인자이고 임산부의 태아는 남아였고 태아의 인자들은 그의 할아버지로부터 물려받아 DMD에 영향을 받지 않은 것으로 진단되었다. 2) DMD 유전자의 exon 소실에 대한 분석 cDNA probe 8과 cDNA probe 2b-3으로써 소실에 대한 진단은 영향을 받은 남자(II-2)는 cDNA probe 8에서 12, 7.3, 6.6, 4.2kb에 소실이 있고 cDNA 2b-3은 1.7kb에 소실에 나타났다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.338-338
• /
• 2016

준설은 흙 또는 모래, 자갈을 파내는 작업을 말하는 것으로, 준설의 목적은 수로, 하천, 항만공사에서 수심의 증가 및 수심을 유지하기 위함이다(산업안전대사전, 2004). 이러한 준설은 하천의 흐름 특성 및 제반 여건 변화를 수반하기도 한다. 준설 직후 낮아진 하상으로 인하여 수위가 감소되는 경우가 있으며, 반면에 수위 저하를 동반하지 않는 경우(저수지와 연결된 준설), 준설 부근에 퇴적이 발생하며 이는 하천의 수위 상승으로 연결될 수 있다. 이러한 수위 상승은 홍수 시 제방의 월류 가능성을 높이는 등 하천의 치수 안전성에 문제를 야기할 수 있다. 본 연구에서는 준설로 인한 하천의 수위 상승에 초점을 맞추었다. 기존 연구에서는 대부분 이러한 현상분석을 위해 수치해석을 이용하였으며, HEC-6, CCHE2D, GSTARS 등의 1, 2차원 수치해석 프로그램을 이용하였다. 그러나 1, 2 차원 수치모형은 수심에 따른 흐름특성을 충분히 반영하지 못하는 한계점을 가진다. 이에 본 연구에서는 3차원 수치해석 모형인 SCHISM을 이용하였다. SCHISM은 하구역의 흐름특성을 분석하기 위해 개발된 프로그램으로, 본 연구와 같이 단면의 급 확대부의 수치해석에 적합한 프로그램이라고 판단된다. 기존연구를 바탕으로 하상변동에 영향을 주는 인자를 산정하여 무차원화 하였으며, 하상 변동량 및 수위상승 영향의 민감도 분석을 수행하였다. 무차원인자는 준설깊이/상류수심(H/hu), 하류하폭/상류하폭($W_d/W_u$), 하류수심/상류수심($h_d/h_u$), 유량(Q)으로 결정하였다. 수치해석에 이용된 지형은 1: 2 경사의 제방을 가진 직선수로이며, 준설 구간을 기준으로 상 하류 각각 1,000 m의 길이를 확보하였다. SCHISM 수치모의를 통하여 민감도 분석을 수행한 결과 모든 수치해석 case에서 퇴적으로 인한 상류수위의 증가를 확인 할 수 있었다. 또한 하류수심/상류수심은 준설부 퇴적 및 상류 수위 상승에 가장 큰 영향을 주는 인자로 나타났다. 본 연구는 하천 준설 계획 시 참고자료로 활용이 가능할 것이며, 준설로 인한 하천수리특성 변화의 선행연구로써 의미가 있다고 판단된다.

• Journal of Genetic Medicine
• /
• v.5 no.2
• /
• pp.139-144
• /
• 2008

We report on two cases of pericentric inversion of X chromosome. The cases were found in a 40-year-old man with azoospermia and in a family of a 38-year-old pregnant woman. The first case with 46,Y,inv(X)(p22.1q27) had concentrations of LH, prolactin, estradiol, and testosterone that were within normal ranges; however, FSH levels were elevated. Testis biopsy revealed maturation arrest at the primary and secondary spermatocytes without spermatozoa. There were no microdeletions in the 6 loci of chromosome Y. For the second case, the cytogenetic study of thepregnant woman referring for advanced maternal age and a family history of inversion X chromosome was 46,X,inv(X)(p22.11q27.2). The karyotype of her fetus was 46,X,inv(X)(p22.1q27). Among other family members, the karyotypes of an older sister in pregnancy and her fetus were 46,X,inv(X)(p22.11q27.2), and 46,Y,?inv(X), respectively. The proband's father was 46,Y,inv(X)(p22.11q27.2). All carriers in the family discussed above were fertile and phenotypically normal. In addition, the ratio of inactivation of inv(X) by RBG-banding was discordant between the two sisters, with the older sister having only 4.1% of cells carrying inactivated inv(X) while the proband had a 69.5% incidence of late replicating inv(X). Therefore, we suggest that the cause of azoospermia in the first case might be related to inversion X chromosome with positional effect. Also, the family of the second case showing normal phenotype of the balanced inv(X) might be not affected any positional effect of genes.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.29-37
• /
• 2019

Textile quality management targets the physical properties of fabrics and the subjective discriminations of color and fitting. Color is the most representative quality factor that consumers can use to evaluate quality levels without any instruments. For this reason, quantification using a color discrimination device has been used for statistical quality management in the textile industry. However, small and medium-sized domestic textile manufacturers use only visual inspection for color discrimination. As a result, color discrimination is different based on the inspectors' individual tendencies and work procedures. In this research, we want to develop a textile industry-friendly quality management method, evaluating the possibility of rapid color discrimination using a digital imaging device, which is one of the office-automation instruments. The results show that an imaging process-based color discrimination method is highly correlated with conventional color discrimination instruments ($R^2=0.969$), and is also applicable to field discrimination of the manufacturing process, or for different lots. Moreover, it is possible to recognize quality management factors by analyzing color components, ${\Delta}L$, ${\Delta}a$, ${\Delta}b$. We hope that our rapid discrimination method will be a substitute technique for conventional color discrimination instruments via elaboration and optimization.

• Journal of Environmental Science International
• /
• v.9 no.6
• /
• pp.455-462
• /
• 2000

This study aims at the development of the model for a forecasting of water quality in river basins using artificial neural network technique. Water quality by Artificial Neural Network Model forecasted and compared with observed values at the Sangju q and Dalsung stations in Nakdong river basin. For it, a multi-layer neural network was constructed to forecast river water quality. The neural network learns continuous-valued input and output data. Input data was selected as BOD, CO discharge and precipitation. As a result, it showed that method III of three methods was suitable more han other methods by statistical test(ME, MSE, Bias and VER). Therefore, it showed that Artificial Neural Network Model was suitable for forecasting river water quality.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.238-243
• /
• 1996

현재 상용 공급되고 있는 4종의 경수로 핵연료 피복관에 대해 노외 부식특성 시험을 수행하여 그 특성을 비교하였다. 이중 3종의 피복관은 제조공정을 달리하여 제조된 low tin Zircaloy-4 (피복관 A, B, C)이며, 1종은 Nb이 첨가된 Zr 합금 (피복관 D)이었다. 증류수내 Li 함량을 2.2 ppm, 30 ppm, 220 ppm으로 변화시키며 부식시험을 수행한 결과 최종 pilgering시 낮은 Q 인자와 높은 열처리 온도로 제조된 피복관 A의 내부식성이 대체로 우수하였으며, 220 ppm Li 수용액에서는 Nb이 첨가된 피복관의 내부식성이 매우 우수한 것으로 나타났다. Li 첨가의 영향을 보면 2.2 ppm Li 첨가시에는 증류수와 거의 동일한 부식거동을 나타내고 있으나 30 ppm Li 첨가시에는 부식이 가속되고 있었으며, 220 ppm Li으로 Li 함량이 크게 증가하였을 때 부식속도도 크게 증가하였다. 수소흡수율은 피복관 A에서 가장 높았으며, 피복관 D가 가장 낮은 값을 나타내었다.

• Journal of Korean Society on Water Environment
• /
• v.21 no.6
• /
• pp.659-663
• /
• 2005

Many studies have been conducted to develop new technologies for arsenic removal and to reveal the levels of arsenic and other chemicals in rivers, lakes and ground waters. However, there are few studies dealing with such compounds in the total water system of the city, and the way of management of these compounds in the water system. Because the occurrence of these hazardous compounds, which are geological origins, is almost impossible to control, it is very important to manage these compounds in the water system. In this research, it was revealed that the risk of arsenic in the water treatment system of S city in Japan. As a results, the parameters such as Q in river and E260 in drinking water treatment plant is proposed as a new indicator with simple and rapid method for controling arsenic level.