• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.215-221
• /
• 2016

The subjects of this study were 64 young children aged 12 to 36 months old and their mothers and teachers. The attachment Q-set and an instrument for teachers' responsivity were used. Data were analyzed using SPSS 18.0, and Cronbach's and Pearson's r were calculated. The results were as follows. Teachers' consistency, warmth, and sensitivity were significantly correlated with the children's attachment to teachers. In addition, teachers' warm and sensitive responses were related to the children's attachment to mothers. Teachers' warm, sensitive, and responsive characteristics are emphasized for quality interactions between young children and teachers, since they contribute to the children's secure attachment to their mothers as well as teachers.

• The Journal of Engineering Geology
• /
• v.5 no.2
• /
• pp.167-179
• /
• 1995

The only three elements such as RQD, N -value and Es were used as a quantitative standard for the design of supporr pattern determidetion on subway line 8th in Seoul. Because the support pattern that was obtained by these elements could not he determined on the basis of the quantitative of geology and the orientations and properties of discontinuity planes, there have been some problems in determining the economic support pattern and tunnel stability. Therefore, in an attempt to determine the stable and economic support pattern with more quantitative elements, more flerrible rock mass classification with geologic conditions was performed by using RMR at 1745 sections and Q-system at 374 sections within Seongnam block on subway line 8th. Then, rusults by these two methods were compared with standard support pattern of the subway line 8th. Moreover, relationships between geology, geologic structures and topography to rock mass grades were studied. According to the rusult of this study, it is judged that the standard support pattern designed with PD-4 or PS - 4 should have been subdivided into 4~6 support patterns. Some sections where geologic structures such as faults and joints are developed tend to have rock mass grades. And they also have low rock mass grades near valley. On thr other hand, they show intermediate grades at piedmont area and the greatest ones at high mountains.

• Korean journal of food and cookery science
• /
• v.15 no.2
• /
• pp.127-132
• /
• 1999

Dried noodles (somyon) were stored for 7 months at 25, 35 and 45$^{\circ}C$, and changes of water activity, amylograms and color of dried noodle at 4 week intervals were comparatively analyzed. The water activities during storage period were 0.43∼0.56 at all storage temperature. The breakdown of dried noodle by RVA(rapid visco analyser) increased as storage period increased. Color difference ($\Delta$E) was chosen for quality index due to the highest correlation coefficient between sensory score and color difference. The shelf-life of dried noodle was estimated from change of color, which was linearly increased as the storage period increased. The activation energy and Q$\sub$10/ value for color difference were 75.21 kJ/mol and 2.76 at 25$^{\circ}C$, respectively. Shelf-life of dried noodle at 25 were 27.9 months, respectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2009.03a
• /
• pp.750-758
• /
• 2009

This study, as basic research which was intended to develope the surface reinforcement method using reinforcement material which is applicable to very soft ground in Korea, was aimed at proposing the design parameter for the surface ground improvement method. To that end, a wide width tensile test using geotextile, geogrid and steel bar (substitute for bamboo) and 25 kinds of the laboratory model tests with the end restraint conditions of the reinforcement that comprises the constrained and partially constrained (3 types) conditions were conducted. And the result indicated that the modulus of subgrade reaction or $N_c$ value (5.3) apparently overestimated the bearing capacity of very soft ground such as dredged ground. Moreover, as a result of model test by partially constraining the preload of 23.0kgf using geotextile, the effect of bearing capacity($q_1$) appeared to be the largest till the loading stress was $0.4tf/m^2$ due to cohesion, while it reached 75% of the maximum bearing force after $0.4tf/m^2$ due to increase in the effect of bearing capacity($q_2$) caused by the tensile force of the reinforcement. Such results tended to have appeared constantly or very similarly with each other, irrespective of the type of reinforcement (geogrid, steel bar) and constraint conditions.

• Journal of the Korean Ceramic Society
• /
• v.37 no.12
• /
• pp.1229-1233
• /
• 2000

(1-x)NdAlO$_3$-xCaTiO$_3$세라믹스의 결정구조와 마이크로파 유전특성을 조사하였다. 시편의 결정구조는 조성에 따라서 변화하였는데, 그 결정구조는 x$\leq$0.1일 때는 능면정(rhombohedral) 구조를, 0.3$\leq$x$\leq$0.7에서는 정방정 (tetragonal) 구조를 그리고, x$\geq$0.7일 때 다시 사방정 (orthorhombic) 구조로 바뀌었다. 또한 (1-x)NdAlO$_3$-xCaTiO$_3$세라믹스에서 이차상의 두 종류가 발견되었다. x$\leq$0.5인 시편에서는 Nd$_4$Al$_2$O$_{9}$상이, x$\geq$0.7인 시편에서는 Al-rich상이 발견되었다. x가 증가함에 따라, 유전율 ($\varepsilon$$_{r}$)과 공진주파수의 온도계수 ($ au$$_{f}$ )가 증가하였고, Q$\times$f 값은 x의 증가에 따라 증가하며, x=0.5일 때 최대값을 얻었다. 그리고 0.3NdAlO$_3$-0.7CaTiO$_3$에서 Q$\times$f=46,000, $\varepsilon$$_{r}$=45 그리고 $\tau$$_{f}$ =-1.5 ppm/$^{\circ}C$의 우수한 마이크로파 유전특성을 얻을 수 있었다.

• Korean Journal of Food Science and Technology
• /
• v.27 no.4
• /
• pp.546-554
• /
• 1995

Vacuum cooling of crisphead lettuce by pilot-scale vacuum cooling apparatus, transportation under the conventional and cold-chain systems and distribution were carried out for its freshness prolongation and application of cold-chain system for fresh fruits and vegetables. Changes in temperatures of crisphead lettuce were also measured during transportation. $Q_{10}$ value for respiration rate of crisphead lettuce was $1.7{\sim}2.4$ and its initial freezing point was $-0.2^{\circ}C$. Cooling the vegetable to $0^{\circ}C$ was possible in less than 30 minutes by vacuum cooling. The shelf-life was extended by more than 90% by the combination of vacuum cooling and low temperature distribution.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.12
• /
• pp.22-27
• /
• 2007

In this paper, a novel voltage-controlled oscillator (VCO) using the microstrip square open loop split ring resonator (OLSRR) is presented for reducing the phase noise. For this purpose, the square-shaped split ring resonator (SRR) haying the form of the microstrip square open loop is investigated. Compared with the microstrip square open loop resonator, the microstrip square OLSRR has the larger coupling coefficient value, which makes a higher Q value, and has reduced the phase noise of VCO. The VCO with 1.7V power supply has the phase noise of $-120\sim-116.5$ dBc/Hz @ 100 kHz in the tuning range, $5.746\sim5.854$ GHz. The figure of merit (FOM) of this VCO is $-200.33\sim-197$ dBc/Hz @ 100 kHz in the same tuning range.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.75-81
• /
• 1999

$CaTiO_3$-$ La(Mg_{2/3}Ta_{1/3})O_3$ solid solutions were prepared in order to improve the microwave dielectric properties of $CaTiO_3$. XRD analysis revealed that the crystal structure of the solid solution changed from orthorhombic to monoclinic as the amount of $ La(Mg_{2/3}Ta_{1/3})O_3$increased. When x=0.3 in (1-x)$CaTiO_3+xLa(Mg_{2/3}Ta_{1/3})O_3$, the dielectric constant was 49, the temperature coefficient of resonance frequency was +$14ppm/^{\circ}C$, and $Q \times f_0$ was 17000.

• Membrane Journal
• /
• v.12 no.1
• /
• pp.21-27
• /
• 2002

The formation of soluble microbial products(SMP) and molecular weight distribution on loading rate were observed in batch-type culture medium, which phenol was fed as a substrate. The molecular weight destribution was obtained by using 30K, 100K dalton and $0.45{\mu}$ membrane filters. When the phenol concentrationas a substrate was 120, 230 and 440 mg/L , the specific substrate utilization rate(q) showed 0.639, 1.281 and 1.744 mgTOC/mgMLSS/day, respectively. The endogenous biomass decay rate constant($K_d$) at each substrate concentration was 0.00536, 0.0661 and 0.0749($day^1$), respectively. The $SMP_e$ product rate constant($k_{SMP}_ e$) showed 0.006, 0.0058 and 0.0057($day^1$), respectively. The initial influent substrate during the course of time degraded and produced $SMP_s$. The $SMP_s$ was converted to the $SMP_{nd}$ and endogenous phase converted to the $SMP_e$ ingredients. The molecula weight distribution on loading rate was converted to a higher MW during the course of time.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.1
• /
• pp.48-55
• /
• 2021

The 3-coil magnetic resonance wireless power transmission system was analyzed using an equivalent circuit model, and the |S21| of the system was expressed as the equation of the Q of the three coils, the coupling coefficient k between the transmitting coil and the relay coil, the relay coil and the receiving coil. It is suggested that the maximum efficiency can be obtained when the relay coil is located in the center of the transmitting and the receiving coil. When the distance between the transmitting and the receiving coil is 30 cm and the two coils are aligned, maximum efficiency of 9 % is obtained with the relay coil centered between the coils. If the transmitting coil and the receiving coil are misaligned during a wireless charging of an electric vehicle, the efficiency is expected to decrease significantly compared to the aligned case. It is expected that the efficiency can be increased by using a relay coil and by rotating the coil.