• Advances in materials Research
• /
• v.1 no.4
• /
• pp.299-310
• /
• 2012

This article describes the synthesis of a novel N-substituted pyrrole monomer containing an azobenzene group. The 2-[N-ethyl-N-[4-[(4-nitrophenyl) azo]-phenyl] amino] ethyl-3-chloropropionate (RedII) compound was synthesized via reaction of 4-nitro-4'-[N-ethyl-N-(2-hydroxyethyl)-amino] azobenzene (RedI) and 3-chloropropionic acid. RedII was reacted with the potassium salt of pyrrole then 2-[N-ethyl-N-[4-[(nitro phenyl) azo] phenyl] amino] ethyl-N-pyrrolyl propionate (Py-RedII) was prepared. Chemical polymerization of Py-RedII and copolymerization of Py-RedII with pyrrole carried out using $FeCl_3$. Poly (2-[N-ethyl-N-[4-[(nitro phenyl) azo] phenyl] amino] ethyl-N-pyrrolyl propionate) (PPy-RedII) was characterized by UV, IR, $^1HNMR$, $^{13}CNMR$ spectroscopies. Electropolymerization of Py-RedII and electroco-polymerization of Py-RedII and pyrrole were studied using conventional three electrodes system, Ag/AgCl reference electrode, platinum counter electrode and GC disk working electrode. Scanning electron microscopy (SEM), thermogravimetry analysis (TGA) and differential scanning calorimetry (DSC) were used for thermal and rheological studies. The TGA curve of PPy-RedII demonstrated a high thermal stability up to 200°C and its DSC thermogram showed two endothermic peaks at 88 and $122^{\circ}C$. The glass transition temperature of the polymer was found to be above the room temperature. Electrical conductivities of PPy-RedII and it's copolymer with pyrrole (PPy-RedII-co-Py) were studied by the four-probe method and produced conductivities of $7.5{\times}10^{-4}$ and $6.5{\times}10^{-3}Scm^{-1}$, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.11
• /
• pp.3399-3404
• /
• 2013

A new accepter unit, pyrrolo[3,2-b]pyrrole-2,5-dione, was prepared and utilized for the synthesis of the conjugated polymers containing electron donor-acceptor pair for OPVs. Pyrrolo[3,2-b]pyrrole-2,5-dione unit, regioisomer of the known pyrrolo[3,4-c]pyrrole-1,4-dione, is originated from the structure of stable synthetic pigment. The new conjugated polymers with 1,4-diphenylpyrrolo[3,2-b]pyrrole-2,5-dione, thiophene and carbazole were synthesized using Suzuki polymerization to generate P1 and P2. The solid films of P1 and P2 show absorption bands with maximum peaks at about 377, 554 and 374, 542 nm and the absorption onsets at 670 and 674 nm, corresponding to band gaps of 1.85 and 1.84 eV, respectively. To improve the hole mobility of the polymer with 1,4-bis(4-butylphenyl)-pyrrolo[3,2-b]-pyrrole-2,5-dione unit, which was previously reported by us, the butyl group at the 4-positions of the N-substituted phenyl group was substituted with hydrogen and methyl group. The field-effect hole mobility of P2 is $9.6{\times}10^{-5}cm^2/Vs$. The device with $P2:PC_{71}BM$ (1:2) showed $V_{OC}$ value of 0.84 V, $J_{SC}$ value of 5.10 $mA/cm^2$, and FF of 0.33, giving PCE of 1.42%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.477-477
• /
• 2012

미생물 연료전지는 정부가 추진하고 있는 신성장 동력사업의 녹색성장 정책에 부합하는 환경융합 신기술로써 일상생활에서 배출되는 하 폐수와 같은 유기물질을 전자공여체로 이용하여 전기에너지를 생산 할 수 있다는 점에서 각광받고 있다. 미생물 연료전지는 산화전극부의 미생물이 공급된 유기물질 을 분해하여 전자와 수소이온을 생성시키며 이들은 산소가 존재하는 환원전극부로 이동하여 물로 환원 됨 으로써 전기를 생성한다. 전기 화학적 성능의 향상을 위해 미생물 연료전지에서는 환원전극부에 서의 산소와 전자 및 수소이온의 빠른 환원반응을 유도해 주는 Pt촉매를 이용한다. 하지만 고가의 Pt 촉매는 미생물 연료전지의 현장적용을 위한 규모확장 시 초기비용이 증가되는 문제점을 초래한다. 이에 미생물 연료전지의 대체촉매 개발에 대한 많은 연구가 진행되고 있다. 화학적 연료전지에 관한 논문에서 연료전지의 촉매로 산소 환원반응에 높은 성능을 보이는 Co-N/C 형태의 Cobalt poly-pyrrole carbon가 제시 되었다. 이는 가격적인 측면에서는 Pt촉매의 약1/10배 정도 수준이지만 셀 성능은 Pt촉매의 95%정도의 효율을 보인다는 측면에서 향후 Pt 대체촉매로 가능성을 보여주는 새로운 비금속 촉매물질이다. Cobalt poly-pyrrole carbon이 Pt-catalsyt 셀 전압 성능 대비 약 66 %의 효율을 보였고 내부저항과 최대전력 밀도에 있어서도 촉매를 사용하지 않은 경우와 비금속 촉매의 성능보다 높음을 알 수 있었다. 본 연구는 Pt-catalsyt를 대체할 수 있는 저가의 산소환원 촉매물질 발굴을 위해 미생물연료전지에서 사용된 전례가 없으며 현재 화학전지의 촉매로 널리 쓰이고 있는 Cobalt poly-pyrrole carbon의 산소환원 촉매로써의 이용가능성을 평가하기 위해 실시되었으며, 평가한 결과는 첫 번째로 Cobalt poly-pyrrole carbon을 사용한 경우가 촉매를 사용하지 않은 경우와 비금속 촉매보다 환원 전극부에서의 원활한 환원작용이 진행되고 있음을 추측할 수 있으며 Pt-catalyst와 비교하였을 때 성능 대비 저렴한 가격으로 가격 경쟁력에 있어서 우월하다고 판단되었고 두 번째로 전기화학적 성능평가 및 EIS를 이용한 환원전극부의 내부저항 평가를 실시한 결과 셀 전압에 있어서 가장 많은 도말량 ($2.0mg/cm^2$)이 높은 성능을 보이고 있음을 알 수 있었다.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.04b
• /
• pp.351-354
• /
• 2001

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.907-909
• /
• 2004

• Journal of the Korean Electrochemical Society
• /
• v.5 no.4
• /
• pp.202-208
• /
• 2002

We have been investigating electropolymerization of pyrrole in aqueous electrolyte solutions in acidic as well as in neutral conditions by in situ electrochemical quartz crystal oscillator method, where resonant frequency and resonant resistance can be monitored simultaneously with current-voltage measurements during electropolymerization of pyrrole. The properties of thin PPy films prepared on electrode surfaces depended strongly on the experimental variables of electrode potentials applied, solution pH, kinds and quantity of supporting electrolytes, added chemicals, and the mode of electrochemical method employed. We are applying our experience gained on electropolymerization of pyrrole to immobilizing biomolecules onto electrode surfaces to develop a biosensor system. In this work, we wish to present the results on electrochemical monitoring on electropolymerization of pyrrole in the presence of DNA and albumin in different electrochemical conditions. Additionally we will summarize our investigations on the miniaturization of biomolecules/PPy composites by means of scanning tunneling microscopy.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.675-677
• /
• 2012

• Bulletin of the Korean Chemical Society
• /
• v.21 no.4
• /
• pp.429-433
• /
• 2000

Corroles and oxacorroles were synthesized by acid-catalyzed, 2+2 condensation. The condensation afforded different corroles bearing core-heteroatoms at the predesignated locations. Regioselective a- a’ linkage be-tween pyrrole and furan or betwee n pyrrole and pyrrole was achieved by keeping the linking carbon at different position of starting dipyrromethanes. The condensation was only fruitful when furan-containing dipyrromethanes were condensed.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.5
• /
• pp.476-480
• /
• 2001

4-Thiazolidinones which are hetarylsubstituted at the 2-position were prepared by the reaction of mercapto acids with aldimines which were prepared by the condensation of pyrrole-2-carbaldehyde with different aromatic amines. After their benzylide ne derivatives were obtained, we first applied the Wittig reagent on them in the presence of triethylamine, dihydrofurothiazolidines were synthesized. Second, we prepared new pyrazolinothiazolidines by using phenylhydrazine in the presence of sodium acetate. All mentioned compounds have been characterized by their spectral data, and screened for their antimicrobial activities. Some of them exhibit moderate to good antibacterial and tuberculostatic activities.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.3
• /
• pp.630-634
• /
• 2010

The synthesis and ion binding properties of calix[4]pyrrole bearing pyrene moieties appended to one side of the calix[4]pyrrole are reported. The key feature is the presence of flexible fluorescence arms attached to the calix[4]pyrrole ring in a cis-fashion. The preliminary solution phase anion and cation binding studies revealed that the systems can be in fact as viable sensors for anionic guest.