• Textile Coloration and Finishing
• /
• v.2 no.1
• /
• pp.31-36
• /
• 1990

The electrically conducting cellulose acetate/polypyrrole composite films were synthesized by exposing cellulose acetate film containing oxidizing agent to pyrrole vapour and the formation of polypyrrole is confirmed by IR and electron microscopic studies. The morphologies of polypyrrole in the composites are different depending on the oxidizing agent. Ferric chloride is most effective among several metallic chlorides to synthesize the composites with high electrical conductivity. The conductivity of composite films synthesized with 50 wt.% of ferric chloride reaches upto $10^{-2}S/cm$.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.9
• /
• pp.1056-1060
• /
• 1999

New water soluble and highly electron deficient cobalt(II) tetrakis-(1,2,5,6-tertrafluoro-4-NN'N"-trimethyla-nilinium)-β-octabromoporphyrin [Co II (Br8TTFP)(Y)2] was synthesized and used for the electrocatalytic reduction of dioxygen. The first reduction of synthesized [Co II (Br8TTFP)(Y)2] involves one electron process to give metal centered [Co I (Br8TTFP)(Y)2]. The reduction of potential [E1/2 = -0.32 V] of [Co II (Br8TTFP)(Y)2] shifts positively 370 mV compared with that of [Co II (TTFP)(Y)2] due to the substituted bromide to β-pyrrole positions. The electrochemically reduced [Co I (Br8TTFP)(Y)2] binds dioxygen and catalytically reduces it to HOOH by 2e - transfer. Cyclic and hydrodynamic voltammetry at a glassy carbon electrode in dioxygen-saturated aqueous solutions are used to study the electrocatalytic pathway.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.5
• /
• pp.537-540
• /
• 1991

Electrophilic methylation reactions of five-membered heteroaromatic compounds, furan, pyrrole and thiophene, with the dimethylfluoronium ion, ${CH_3}{FCH_3}(+), have been investigated theoretically by the MNDO method. The site selectivity of ${\alpha}, {\beta}$ and heteroatom (X) is related to charge density of the site, indicating that the site selectivity is dictated by electrosatic interaction between two reaction centers. The reactivity order between the three heteroaromatics can not be determined decisively since the order differs depending on which site is compared, with relatively low activation enthalpies, ${\Delta}{H^\neq}$= 20-30 kcal/mol, in all cases. These site and substrate selectivity behaviors are consistent with the gas-phase experimental results.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.2
• /
• pp.183-188
• /
• 1998

Incorporation of metalloporphyrins into polypyrrole (PPy) film was achieved either by electropolymerization of pyrrole in the presence of metal-tetra(sulfonatophenyl)porphyrin anion (MTSPP, M=Co, Fe) or by metalizing hydrogenated tetra(4-sulfonatophenyl)porphyrin anion (H2TSPP) doped into PPy through ion-exchange. Electrochemical reduction of oxygen on the PPy doped with metallo porphyrin (PPy-MTSPP) was studied in acidic and basic solutions. Oxygen reduction on PPy-MTSPP electrodes appeared to proceed through a 4-electron pathway as well as a 2-electron path. In acidic solutions, the overpotential for O2 reduction on PPy-CoTSPP electrode was smaller than that on gold by about 0.2 V. In basic solutions the overpotential of the PPy-CoTSPP electrode in the activation range was close to those of Au and Pt. The limiting current was close to that of Au. However, polypyrrole doped with cobalt-tetra(sulfonatophenyl)porphyrin anion (PPy-CoTSPP) or with iron-tetra(sulfonatophenyl)porphyrin anion (PPy-FeTSPP) was found to have limited potential windows at high temperatures (above 50 ℃), and hence the electrode could not be held at the oxygen reduction potentials in basic solutions (pH 13) without degradation of the polymer.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.3
• /
• pp.276-280
• /
• 1999

The different core-modified porphyrins 21-thia-23-carba-12-aza-5,10-dimesityl-15,20-diphenylporphyrin (6), and their N(12)-methyl derivatives (8) were synthesized by acid-catalyzed [3+1] condensation of the corresponding 16-thia-5,10-dimesityltripyrromethanes and 2,4-bis[(α-hydroxy-α-phenyl)methyl]pyrrole. Spectroscopic evidence indicates the existence of two different tautomeric forms at room temperature in porphyrin (6). A third form of tautomer was observed when the temperature was lowered to 223 K. The most stable tautomer is one in which the nitrogenic proton resides outside the core of the macrocycle. The ratio of the three different tautomers (outer N-H/ two inner N-H, i.e. 6/12/13) was 1/l/0.5 in the case of (6) while the ratio of 1/l/0.3 was observed in the case of (10). In the case of 21-oxa-23-carba-12-aza-5,10,15,20-tetraphenylporphyrin (7), the only stable tautomeric form observed by 1H NMR was the one that nitrogenic proton resides inside the core on

• Bulletin of the Korean Chemical Society
• /
• v.19 no.3
• /
• pp.314-319
• /
• 1998

One flask synthesis of dithienylmethane and difurylmethane is reported. The reaction of aldehydes with excess furan or thiophene affords the meso-phenyldithienylmethane (DTM) and meso-phenyldifurylmethane (DFM), respectively. The reaction is catalyzed with trifluoroacetic acid or with BF3·O(Et)2. An acyl group is selectively introduced in 1 and 9 position of difurylmethane and dithienylmethane by use of an acid chloride and tin (IV) chloride. The reduction of resulting 1,9-bisacyldifurylmethane or 1,9-bisacyldithienylmethane affords the corresponding 1,9-bis-diol. An acid catalyzed condensation of diol with meso-phenyldipyrromethane followed by oxidation with DDQ gives the porphyrins. The reaction resulted meso-5,10,15,20-tetraphenyl-21,22-dithiaporphyrin (SSNN) or 15-mesityl-5,10,20-triphenyl-21,22-dioxaporphyrin (OONN), respectively. The formation of small amount of meso-tetraphenylporphyrin (TPPH2) is also observed. The formation of TPP indicates that meso-phenyldipyrromethane is reversibly cleaved and form pyrrole and pyrrylbenzylcarbocation during the condensation. The proton nmr and electronic spectrum of the SSNN and OONN porphyrins are somewhat different from the previously synthesized meso-5,10,15,20-tetraphenyl-21,23-dithiaporphyrin (SNSN) or meso-5,10,15,20-tetraphenyl-21,23-dioxaporphyrin (ONON).

• Journal of Radiopharmaceuticals and Molecular Probes
• /
• v.7 no.2
• /
• pp.141-146
• /
• 2021

With increasing interest in fluorinated compounds, nucleophilic fluorination reaction has been generally used for synthesizing fluorine-containing chemicals. However, alkali metal fluorides (MFs) generally have low solubility and reactivity in organic solvent. To overcome these problems, various phase transfer catalysts (PTCs) have been investigated. Calix-arene is known as to capture the metal cation(M⁺), and therefore in this review, we would like to introduce several kinds of calix-arene based PTCs, such as bis-tert-alcohol-functionalized crown-6-calix[4]arene (BACCA), oligo-ethylene glycol linked bis-triethyleneglycol crown-5-calix[4]arene (BTC5A), and ionic liquid functionalized calix-arene based catalyst, as well as ion-pair receptor crown-6-calix[4]arene-capped calix[4]pyrrole.

• Journal of Life Science
• /
• v.16 no.2 s.75
• /
• pp.206-212
• /
• 2006

In order to synthesize novel anticonvulsants, we researched that the reactions of diamines with 2,5-dimethoxytetrahydrofuran and 1,3-acetonedicarboxylic acid. The reaction of ethylenediamine with 2,5-dimethoxytetrahydrofuran and 1,3-acetonedicarboxylic acid afforded 8-(2-pyrrol-1-yl-ethyl)-8-aza-bicyclo[3,2,1]octan-3-one (yield; 5.0%) and 1,2-di-(8-aza-bicyclo[3,2,1]octan3-onyl)ethane (yield; 17.0%). In case of 1,3-diaminopropane, 8-(3-pyrrol-1-yl-propyl)-8-aza-bicyclo[3,2,1]octan-3-one(yield; 6.0%) and 1,3-di-(8-aza-bicyclo[3,2,1]octan-3-onyl)propane (yield; 21.0%) were obtained. In case of 1,8-diaminooctane, 8-(8-pyrrol-1-yl-octyl)-8-aza-bicyclo-[3,2,1]octan-3-one (yield; 2.6 %) and 1,8-di-(8-aza-bicyclo[3,2,1]octan-3-onyl)octane (yield; 24.9%) were obtained. In diaminobenzene reactions, synthetic yields of 8-aza-bicyclo-[3,2,1]octan-3-one derivatives were higher than those of pyrrole derivatives because re actions were done under room temperature. The longer the carbon chain of diaminoalkane is, the more reactive N atom is due to more electron donating effect, and the less steric hindrance around the carbon gave the higher chemical yields. The reaction of p-phenylenediamine as a diaminobenzene with 2,5-dimethoxyte-trahydrofuran and 1,3-acetonedicarboxylic acid produced p-dipyrrolylbenzene (yield; 4.0%), 8-(4-pyrrol-1-yl-phenyl)-8-aza-bicyclo[3,2,1]octan-3-one (yield; 12.0%), and 1,4-di-(8-aza-bicyclo[3,2,1]octan-3-onyl)benzene (yield; 59.0%). In case of m-phenylenediamine, 8-(3-pyrrol-1-yl-phenyl)-8-aza-bicyclo[3,2,1]octan-3-one(yield; 2.0%) and 1,3-di-(8-aza-bicyclo[3,2,1]octan-3-onyl)benzene (yield ; 28.0%) were obtained. But, synthesis of 1,2-di-(8-aza-bicyclo[3,2,l]octan-3-onyl)benzene by treatment of o-phenylenediamine was not successful, presumably due to the steric hindrance of 8-aza-bicyclo-[3,2,1]octan-3-one rings.

• Applied Chemistry for Engineering
• /
• v.5 no.5
• /
• pp.764-771
• /
• 1994

Electrochemical synthesis of conductive polypyrrole films was carried out in nucleophilic solvent containing p-toluenesulfonic acid or bezensulfonic acid as supporting electrolyte and dopant. Also characteristics of degradation and improvement of mechanical properties were studied. The conductivity, tensile strength and elongation of the films obtained in dimethyformamide/p-toluenesulfonic acid had the highest value of 10-40S/cm, $25N/mm^2$ and 10%, respectively. The optimum condition of electrochemical synthesis was $2mA/cm^2$ for constant current method and 0.9V for constant potential method containing 0.5M pyrrole and 0.5M p-TSA. The obtained films showed good stability in air and electrode characteristics of secondary battery by reversibility in doping and undoping. The degradation process was 1st order reaction at various temeprature. The activation energy and rate constant of degradation reaction were $1.01JK^{-1}mol^{-1}$ and $3.1{\times}10^{-7}min^{-1}$ respectively at $25^{\circ}C$. For the improvement of mechanical properties, composition of polypyrrole films with various host polymer were investigated and increase of tensile strength and elongation was confirmed.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.32 no.5
• /
• pp.655-660
• /
• 2003

Flavor components of dry shrimp, roasted-dry shrimp and roasted-dry shrimp with corn oil (w/w: 10%, 25%) were investigated to evaluate the effects of added corn oil on the formation of volatile components in dry shrimp during roasting process. The identified volatile included 20 nitrogen-containing compounds (7 pyrazines, 7 pyridines 3 pyrroles, others) 14 aldehydes, 5 alcohols, 4 ketones and 11 others. The largest quantities of lipid-derived products hexanal, nonanal, 2-pentylfuran, 1-octen-3-ol, trans-2-decenal, trans, cis-2,4-decadienal, trans, trans-2,4-decadienal were detected in the roasted-dry shrimp samples with corn oil. The lipid-derived aldehydes might be involved in the formation of 3- ethyl-2,5-dimethylpyrazine, 2,3,5-trimethyl-6- ethylpyrazine, 2-ethyl-5,6-dimethylpyrazine, 2,3,5- trimethylpyrazine, 3- ethyl-2,6-dimethylpyridine, 2-propylpyridine, ben-zopyrrole and the others. The nitrogen-containing compounds seem to be a major flavor component and responsible for characteristic flavor in roasted-dry shrimp with corn oil.