• 방사성폐기물학회지
• /
• 제7권3호
• /
• pp.167-174
• /
• 2009

EBR-II사용후핵연료의 파이로건식처리공정에 의해 발생된 우라늄의 순도에 대한 포괄적인 분석을 수행하였다. 분석 결과를 미국 아이다호 국립연구소 및 한국원자력 연구원의 협력과제 하에서 한국과 미국의 저준위 폐기물 기준으로 비교하였다. 미국의 저준위 폐기물 기준은 우라늄 등위원소를 포함하지 않으나, 한국의 경우는 포함하는 것으로 조사되었다. 분석 결과 EBR-II 우라늄 생성물 내에서 저준위 기준을 초과하는 유일한 알파 핵종은 우라늄 동위원소가 아니라 Pu-239였다. 생성물 내의 Pu 오염은 개량된 염증류공정을 통한 예비실험 결과 획기적으로 줄일 수 있음을 알 수 있었으며, 보다 공정을 개선시킨다면 제안된 기술을 이용하여 미국의 저준위 기준을 만족시킬 수 있을 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제45권1호
• /
• pp.29-40
• /
• 2013

Two different kinds of nuclear power plants produce a substantial amount of spent fuel annually in Korea. According to the current projection, it is expected that around 60,000 MtU of spent fuel will be produced from 36 PWR and APR reactors and 4 CANDU reactors by the end of 2089. In 2006, KAERI proposed a conceptual design of a geological disposal system (called KRS, Korean Reference disposal System for spent fuel) for PWR and CANDU spent fuel, as a product of a 4-year research project from 2003 to 2006. The major result of the research was that it was feasible to construct a direct disposal system for 20,000 MtU of PWR spent fuels and 16,000 MtU of CANDU spent fuel in the Korean peninsula. Recently, KAERI and MEST launched a project to develop an advanced fuel cycle based on the pyroprocessing of PWR spent fuel to reduce the amount of HLW and reuse the valuable fissile material in PWR spent fuel. Thus, KAERI has developed a geological disposal system for high-level waste from the pyroprocessing of PWR spent fuel since 2007. However, since no decision was made for the CANDU spent fuel, KAERI improved the disposal density of KRS by introducing several improved concepts for the disposal canister. In this paper, the geological disposal systems developed so far are briefly outlined. The amount and characteristics of spent fuel and HLW, 4 kinds of disposal canisters, the characteristics of a buffer with domestic Ca-bentonite, and the results of a thermal design of deposition holes and disposal tunnels are described. The different disposal systems are compared in terms of their disposal density.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.997-1001
• /
• 2016

Conductive ceramics are being developed to replace current Pt anodes in the electrolytic reduction of spent oxide fuels in pyroprocessing. While several conductive ceramics have shown promising electrochemical properties in small-scale experiments, their long-term stabilities have not yet been investigated. In this study, the chemical stability of conductive $La_{0.33}Sr_{0.67}MnO_3$ in $LiCl-Li_2O$ molten salt at $650^{\circ}C$ was investigated to examine its feasibility as an anode material. Dissolution of Sr at the anode surface led to structural collapse, thereby indicating that the lifetime of the $La_{0.33}Sr_{0.67}MnO_3$ anode is limited. The dissolution rate of Sr is likely to be influenced by the local environment around Sr in the perovskite framework.

• Nuclear Engineering and Technology
• /
• 제49권1호
• /
• pp.148-164
• /
• 2017

The focus on the issues surrounding spent nuclear fuel and lifetime extension of old nuclear power plants continues to grow nowadays. A transparent decision-making process to identify the best suitable nuclear fuel cycle (NFC) is considered to be the key task in the current situation. Through this study, an attempt is made to develop an equilibrium model for the NFC to calculate the material flows based on 1 TWh of electricity production, and to perform integrated multicriteria decision-making method analyses via the analytic hierarchy process technique for order of preference by similarity to ideal solution, preference ranking organization method for enrichment evaluation, and multiattribute utility theory methods. This comparative study is aimed at screening and ranking the three selected NFC options against five aspects: sustainability, environmental friendliness, economics, proliferation resistance, and technical feasibility. The selected fuel cycle options include pressurized water reactor (PWR) once-through cycle, PWR mixed oxide cycle, or pyroprocessing sodium-cooled fast reactor cycle. A sensitivity analysis was performed to prove the robustness of the results and explore the influence of criteria on the obtained ranking. As a result of the comparative analysis, the pyroprocessing sodium-cooled fast reactor cycle is determined to be the most competitive option among the NFC scenarios.

• Nuclear Engineering and Technology
• /
• 제42권1호
• /
• pp.17-36
• /
• 2010

In this study, we compare the mass release rates of radionuclides(1) from waste forms arising from the KIEP-21 pyroprocessing system with (2) those from the directly-disposed pressurized-water reactor spent fuel, to investigate the potential radiological and environmental impacts. In both cases, most actinides and their daughters have been observed to remain in the vicinity of waste packages as precipitates because of their low solubility. The effects of the waste-form alteration rate on the release of radionuclides from the engineered-barrier boundary have been found to be significant, especially for congruently released radionuclides. the total mass release rate of radionuclides from direct disposal concept is similar to those from the pyroprocessing disposal concept. While the mass release rates for most radionuclides would decrease to negligible levels due to radioactive decay while in the engineered barriers and the surrounding host rock in both cases even without assuming any dilution or dispersal mechanisms during their transport, significant mass release rates for three fission-product radionuclides, $^{129}I$, $^{79}Se$, and $^{36}Cl$, are observed at the 1,000-m location in the host rock. For these three radionuclides, we need to account for dilution/dispersal in the geosphere and the biosphere to confirm finally that the repository would achieve sufficient level of radiological safety. This can be done only after we have known where the repository site would by sited. the footprint of repository for the KIEP-21 system is about one tenth of those for the direct disposal.

• Nuclear Engineering and Technology
• /
• 제43권2호
• /
• pp.149-158
• /
• 2011

Metal waste generated from the pyroprocessing of 10 MtU of spent fuel was classified by comparing the specific activity of a relevant radionuclide with the limit value of the specific activity specified in the Korean acceptance criteria for a lowand intermediate-level waste repository. A Korean Optimized Fuel Assembly design with a 17${\times}$17 array, an initial enrichment of 4.5 weight-percent, discharge burn-up of 55 GWD/MtU, and a 10-year cooling time was considered. Initially, the mass and volume of each structural component of the assembly were calculated in detail, and a source term analysis was subsequently performed using ORIGEN-S for these components. An activation cross-section library generated by the KENO-VI/ORIGEN-S module was utilized for top-end and bottom-end pieces. As a result, an Inconel grid plate, a SUS plenum spring, a SUS guide tube subpart, SUS top-end and bottom-end pieces, and an Inconel top-end leaf spring were determined to be unacceptable for the Gyeongju low- and intermediate-level waste repository, as these waste products exceeded the acceptance criteria. In contrast, a Zircaloy grid plate and guide tube can be placed in the Gyeongju repository. Non-contaminated Zircaloy cladding occupying 76% of the metal waste was found to have a lower level of specific activity than the limit value. However, Zircaloy cladding contaminated by fission products and actinides during the decladding process of pyroprocessing was revealed to have 52 and 2 times higher specific activity levels than the limit values for alpha and $^{90}Sr$, respectively. Finally, it was found that 88.7% of the metal waste from the 17${\times}$17 Korean Optimized Fuel Assembly design should be disposed of in a deep geological repository. Therefore, it can be summarized that separation technology with a higher decontamination factor for transuranics and strontium should be developed for the efficient management of metal waste resulting from pyroprocessing.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4431-4440
• /
• 2022

An advanced nuclear reactor based on molten salts including a molten salt reactor and pyroprocessing needs a sensitive monitoring system suitable for operation in harsh environments with limited access. Multi-element detection is challenging with the conventional technologies that are compatible with the in-situ operation; hence laser-induced breakdown spectroscopy (LIBS) has been investigated as a potential alternative. However, limited precision is a chronic problem with LIBS. We increased the precision of LIBS under high temperature by protecting optics using a gas protective layer and correcting for shotto-shot variance and lens-to-sample distance using a laser-induced acoustic signal. This study investigates cerium as a surrogate for uranium and corrosion products for simulating corrosive environments in LiCl-KCl. While the un-corrected limit of detection (LOD) range is 425-513 ppm, the acoustic-corrected LOD range is 360-397 ppm. The typical cerium concentrations in pyroprocessing are about two orders of magnitude higher than the LOD found in this study. A LIBS monitoring system that adopts these methods could have a significant impact on the ability to monitor and provide early detection of the transient behavior of salt composition in advanced molten salt-based nuclear reactors.

• 방사성폐기물학회지
• /
• 제5권4호
• /
• pp.283-295
• /
• 2007

본 연구에서는 경수로 사용후핵연료로부터 다시 핵연료 물질로 재사용할 수 있는 우라늄과 초우라늄원소군을 분리/회수하기 위한 고온전해분리 공정(Pyroprocessing)의 기술적 타당성을 조사하였으며, 나아가서 핵비확산 측면에서 기존 핵연료주기기술의 대체기술로서 적합성이 있는지를 검토하였다. 먼저 고온전해분리 공정에 편입될 각종 단위공정을 조합하여 전체 공정을 구성하였다. 그리고 사용후핵연료에 들어 있는 여러 가지 물질들의 분리 과정에서, 본 연구에서 확보한 실험결과와 관련 문헌에 발표된 각종 분리도 자료를 바탕으로 문제의 원소군들 즉, 우라늄, 초우라늄원소군, 희토류, 귀금속류, 그리고 열발생원소군들이 공정흐름도에서 어떤 경로를 따라 흘러가는지 그 향방을 추적하여 보았다. 결과적으로 전체 공정의 물질수지 산출 결과에 의하면 우라늄과 초우라늄원소군(TRU)은 각각 98.0wt%, 97.0wt%가 제품으로 회수될 수 있으며 나머지 원소군들은 대부분 제거되어 방사성폐기물로 분리될 수 있음을 파악하였다. 게다가 초우라늄원소군 제품이 상당한 ${\gamma}$-방사선과 중성자선을 방출하고 있어 핵비확산에 유리하게 작용하고 있음을 알 수 있었다.

• 방사성폐기물학회지
• /
• 제7권4호
• /
• pp.213-218
• /
• 2009

전해제련 공정은 악티늄족 원소를 동시에 회수하는 공정으로써, Pyroprocessing의 핵확산 저항성을 보장하는 중요한 공정이다. 공학규모의 전해제련 장치를 설계하기 위한 기본 도구를 개발하기 위해서 실험실 규모의 장치에 대한 열전달 해석을 수행하였다. 열전달 해석을 수치 해석적으로 계산하기 위해 ANSYS CXF 상용 코드를 사용하였다. 열전달 해석 결과, 가열부의 길이가 수직으로 용융염의 높이보다 약3배 이상이 되었을 때, 용융염의 온도를 일정하게 유지할 수 있었으며, 냉각부의 길이는 그 영향이 미비하였다. 전해조 덮개 아래의 아르곤 가스의 온도는 냉각 판의 개수에 따라 감소하였으며, 5개 이상 설치 할 경우 $250^{\circ}C$ 이하로 유지할 수 있음을 보였다. 이러한 계산 결과는 실제 실험 장치에서 측정된 장치 내부 온도 분포와 경향성이 일치하는 것을 볼 수 있었다. 본 연구에서 해석 된 전해제련 장치의 열 분포 특성은 공학규모 장치의 설계를 위해 중요한 자료로 사용 될 수 있을 것이다.

• 방사성폐기물학회지
• /
• 제6권3호
• /
• pp.225-232
• /
• 2008

제3차 전력수급기본계획에 근거하여 현재 운영중이거나 계획중인 원자력발전소에서 발생할 사용후핵연료의 양과 특성을 추정하였다. 본 연구에서 고려된 대상 특성은 핵연료집합체에 대한 제원, 핵연료봉 배열, 무게, $^{235}U$ 초기 농축도 및 방출연소도이다. 이들은 파이로공정 시설을 설계하는데 필수적인 것이다. 2077년말까지 가압경수로 사용후핵연료의 예상발생량은 약 23,000 tU이 될 것으로 보인다. $^{235}U$ 초기 농축도 4.5 wt.% 이하를 갖는 사용후핵연료의 비율은 전체 발생량의 약 95%를 차지할 것이며, 16$\times$16 배열을 갖는 핵연료집합체는 74%를 차지할 것 같다. 현재 사용후핵연료의 평균연소도는 45 GWd/tU인데 반해, 2010년대 중 후반 이후 발생할 사용후 핵연료의 평균연소도는 55 GWd/tU이 될 것 같다. 이상의 결과에 따라 파이로공정 시설의 설계를 위한 기준 사용후핵연료를 도출하였다. 예상 사용후핵연료는 21.4 cm $\times$ 21.4 cm의 단면적, 453 cm의 길이, 672 kg의 질량, 4.5 wt.%의 $^{235}U$ 초기 농축도 및 55 GWd/tU의 방출연소도를 갖는 16$\times$16 한국표준형연료가 타당할 것으로 판단된다.