• 분석과학
• /
• 제8권4호
• /
• pp.821-827
• /
• 1995

Polychlorodibenzo-p-dioxins(PCDDs) have been prepared by microsacale pyrolysis of trichlorophenates. During the pyrolysis reaction, dechlorinated dibenzo-p-dioxins were also formed by the thermolysis of PCDDs. The dechlorination pathways of PCDDs were suggested in this reaction. The identification of these products was performed using capillary column gas chromatography-mass spectrometry.

• 청정기술
• /
• 제16권1호
• /
• pp.26-32
• /
• 2010

폴리프로필렌-폴리스타이렌 혼합물의 열분해에 대한 시너지효과를 조사하기 위하여 폴리프로필렌(PP)과 폴리스타이렌(PS) 및 PP-PS혼합물의 저온열분해를 회분식 반응기를 이용하여 상압 및 $450^{\circ}C$에서 실행하였다. 열분해 시간은 20~80분까지 하였고 열분해로 생성된 성분은 지식경제부에서 고시한 증류성상온도에 따라 가스, 가솔린, 등유, 경유, 중유로 분류하였다. GC/MS(Gas chromatography/Mass spectrometry)에 의한 생성오일의 성분 분석은 PP-PS 혼합에 의해서 새로운 성분이 검출되지 않았음을 보여주었다. PP-PS 혼합물의 열분해 생성물의 분석결과, 혼합에 따른 시너지효과 또한 나타나지 않았다. PP-PS 혼합물의 중유수율을 제외한 각 생성물의 수율은 시료의 혼합비율에 비례하였다. 중유수율은 혼합비에 관계없이 거의 일정하게 나타났다.

• Korean Chemical Engineering Research
• /
• 제48권1호
• /
• pp.68-74
• /
• 2010

본 실험은 오일샌드에 함유된 역청을 회수함에 있어 유동층 열분해 실험을 통한 역청 회수의 적합성을 확인하기 위하여 수행하였다. 본 실험에 사용된 캐나다 Alberta 오일샌드는 역청을 11.9%를 함유하고 있으며 열분해 공정을 통하여 회수한 열분해 오일은 오일샌드에 함유되어 있는 역청에 비하여 경질화되는 특성을 갖는다. 본 실험을 위하여 높이 170 cm의 반응기를 설치하였으며 1 atm, $500^{\circ}C$의 반응 조건 하에서 연속 운전 실험을 실시하였고 유동화 가스는 $N_2$를 사용하여 $1.62U_{mf}$ 조건에서 오일샌드의 열분해 반응특성을 연구하였다. 오일샌드 유동층 열분해 실험 결과 역청의 전환율은 87.76%이며 액체 생성물은 74.45%, 가스 생성물은 13.31%의 결과를 얻었다. 오일샌드 유동층 열분해 실험 중 발생하는 열분해 가스는 실시간 가스분석기를 사용하여 $H_2$, $O_2$, CO, $CO_2$, $CH_4$, NO를 분석하였으며 탄화수소 $C_1-C_4$의 분석은 가스크로마토그래피를 사용하여 분석하였다. 열분해 오일은 회수하여 원소분석, 발열량 분석, 중금속 분석과 아스팔텐(asphaltenes) 분석을 실시하였으며 SIMDIS 분석을 통하여 열분해 오일의 특성을 분석하였다. 분석 결과 나프타(naphtha)는 11.50%, 중간유분(middle distillation)은 44.83%, 중질유(heavy oil)는 43.66%의 결과를 얻었다. 이는 역청과 비교하여 나프타와 중간유분 함량이 높은 경질화된 열분해 오일이 회수되었음을 알 수 있다.

• Bulletin of the Korean Chemical Society
• /
• 제17권4호
• /
• pp.334-338
• /
• 1996

Tetra-chlorodibenzo-p-dioxins (tetra-CDDs) were prepared by microscale pyrolysis of trichlorophenates. During the pyrolysis reaction, tri-, di-, and mono-CDDs were also formed by the thermolysis of tetra-CDDs. The dechlorination pathways of tetra-CDDs were suggested for this reaction. The identification of these products was performed with capillary column gas chromatography-mass spectrometry.

• Elastomers and Composites
• /
• 제51권1호
• /
• pp.63-67
• /
• 2016

Poly(ethylene-co-vinyl acetate) (EVA) was pyrolyzed to eliminate acetic acid of VA unit using off-line pyrolysis, and the deacetylated EVA was analyzed infrared spectroscopy (IR) and pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS). EVA film for deacetylation was prepared by solution casting on aluminum foil and it was pyrolyzed at low temperature of $300^{\circ}C$ in the off-line pyrolysis apparatus. After deacetylation, carbon-carbon double bond (C=C) was formed by 1,2-elimination of the VA unit in the EVA backbone. Most of C=C bonds were trans-1,4-unit and 1,2-unit was also observed. Presence of the 1,2-unit in deacetylated EVA indicates that terminal or branch VA units exist in the raw EVA. Py-GC/MS chromatogram of deacetylated EVA displayed much smaller acetic acid and much more abundant other pyrolysis products than that of raw EVA, which means that the pyrolysis efficiency and separation condition were improved.

• Elastomers and Composites
• /
• 제22권4호
• /
• pp.314-323
• /
• 1987

A blend ratio of rubber vulcanzates comprising NBR, CR, EPDM, NR, BR, and SBR alone or blended is determind through a P.G.C. It is found that a characteristic peak of elastomer is proportional to the content of each elastomer when they are pyrolysed. It is also classified to the different AN content in NBR vulcanizates, identification of sulfur-modified and non-sulfur bearing CR polymers, and the content of ethylene, propylene monomer and the third monomer in EPDM vulcanizetes.

• Bulletin of the Korean Chemical Society
• /
• 제19권2호
• /
• pp.164-169
• /
• 1998

Vulcanized rubber containing three kinds of oligomeric resins such as cashew resin, t-octylphenol formaldehyde resin and terpene modified wood rosin has been characterized by simultaneous pyrolysis methylation-gas chromatography/mass spectrometry (SPM-GC/MS). After methylation by the SPM method using tetramethylammonium hydroxide, the methylated pyrolyzates of the corresponding resins were detected with higher sensitivity than underivatized pyrolyzates without any interferences from other ingredients of vulcanized rubber.

• Journal of the Korean Wood Science and Technology
• /
• 제47권4호
• /
• pp.486-497
• /
• 2019

The non-isothermal and isothermal pyrolysis properties of H lignin and P lignin extracted from different biorefinery processes (such as supercritical water hydrolysis and fast pyrolysis) were studied using thermogravimetry analysis (TGA) and pyrolyzer-gas chromatography/mass spectrometry (Py-GC/MS). The lignins were characterized by ultimate/proximate analysis, FT-IR and GPC. Based on the thermogravimetry (TG) and derivative thermogravimetry (DTG) curves, the thermal decomposition stages were obtained and the pyrolysis products were analyzed at each thermal decomposition stage of non-isothermal pyrolysis. The isothermal pyrolysis of lignins was also carried out at 400, 500, and $600^{\circ}C$ to investigate the pyrolysis product distribution at each temperature. In non-isothermal pyrolysis, P lignin recovered from a fast pyrolysis process started to decompose and produced pyrolysis products at a lower temperature than H lignin recovered from a supercritical water hydrolysis process. In isothermal pyrolysis, guaiacyl and syringyl type were the major pyrolysis products at every temperature, while the amounts of p-hydroxyphenyl type and aromatic hydrocarbons increased with the pyrolysis temperature.

• Elastomers and Composites
• /
• 제51권3호
• /
• pp.233-239
• /
• 2016

Polyethylene (PE) and maleic anhydride-grafted PE (PE-g-MAH) were pyrolyzed, and their pyrolysis products were analyzed using gas chromatography/mass spectrometry (GC/MS) to investigate the influence of MAH grafted onto PE on pyrolysis behaviors. Major pyrolysis products of PE and PE-g-MAH were n-alkanes, 1-alkenes, ${\alpha},{\omega}$-alkadienes, and aromatic compounds. 1-Alkenes were more formed than n-alkanes, ${\alpha},{\omega}$-alkadienes, and aromatic compounds. Butadiene was more produced from PE than PE-g-MAH, whereas toluene and ethyl benzene were more generated from PE-g-MAH than PE. Difference in the pyrolysis behaviors between PE and PE-g-MAH were explained by initial decomposition of MAH moiety.

• 대한화학회지
• /
• 제31권3호
• /
• pp.287-291
• /
• 1987

열분해 기체크로마토그래피법을 이용하여 C-F 결합을 깨지 않고 PVA-PVFAc 공중합체중의 trifluoroacetyl기의 양을 정량하여, 공중합체내의 단량체 VFAc의 조성몰분율을 구하였다. GC-pyrogram에서의 trifluoroacetyl compds의 봉우리 면적은 공중합체 시료 3mg이내에서 시료무게와 직선관계를 갖는다. 서로 다른 trifuoroacetyl 치환도를 갖는 공중합체의 gas chromatogram으로부터 계산된 플루오르의 양은 이온전극법을 이용한 플루오르원소 분석치와 잘 일치한다.