• Economic and Environmental Geology
• /
• v.3 no.3
• /
• pp.169-176
• /
• 1970

Kubong Gold Mine is located in Kuryongri, Sayang-myun, Chungyang-gun, Choongchung-Namdo.(latitude $36^{\circ}24^{\prime}N$. longitude $126^{\circ}45^{\prime}30^{{\prime}{\prime}}E$) The mine was begun to work soon after the inhabitants of this village had accidently discovered the outcrops in April 1908. It is one of the largest gold mines in Korea which produces 4,500 tons of crude ore a month. The geology in the area consists of granitic gneiss, banded gneiss, augen-gneiss, mica schist, limesilicate of Pre-Cambrian series and sedimentary rocks(sandstones & conglomerates) of Daedong series. Basic dikes intrude the former formations. The country rock of the ore deposit is a group of the metamorphic rocks mentioned above. Gold-silver bearing quartz vein contains small amounts of pyrite, chalcopyrite, arsenopyrite, galena and sphalerite in which gold and silver occur as native state. The vein strikes $N30^{\circ}{\sim}60^{\circ}E$ and dips $20^{\circ}{\sim}50^{\circ}S$ and the average width of the vein is estimated 1 to 1.5m. Average grade of ore is Au:6~8gr/t and Ag:5~6gr/t. The ore shoot continues from the outcrop to the depth of -1760ML with dip of $20{\sim}25^{\circ}$ and strike extension reaches to 400m at the depth of -1440 ML and to more or less 200m at below. Highgrade of ore vein was found at the lowest level of the ore shoot at the time of recent field survey at the end of August 1970. Its average grade was estimated as Au:20gr/t and its width 1~2.5M in average. A series of futher prospecting for other new ore shoot or parallel veins are urgent and crosscut prospecting along the horizontal level is strongly recommended.

• Economic and Environmental Geology
• /
• v.6 no.3
• /
• pp.133-170
• /
• 1973

The metamorphosed belt on cherty and andesitic rocks of the Gyeongnam province area has been well known as the most important copper matallogenetic province in Korea and locally has been investigated by several geologists. This report is summarized about geology, occurrence of ore deposits, the study of the present status of mine developments and exploitations and the suggestions of future proposed of copper mine developments and harmoniously and reseonably planning of demands and supply of copper ore. For convenience of study the writer divided the survey region as 4 areas, according to the conditions of mine location. They are (1) Goseong copper area (2) Gunbuk-Haman copper area (3) Masan-Changwon copper area (4) Tongrae-Ilgwang copper area. The geology of the above 4 areas consits of Cretaceous Gyongsang System, which is divided into Silla series, Nakdong Series and Bulguksa Series. The former has intrusive and extrusive andesite and sedimentary formation, and the latter has dioritic and hornblende granite. Ore deposits which is mostly vein types are confined mostly in the andesite and cherty rocks of Silla and Nakdong Series. It is observed slight hydrothermal alteration, i. e. propylitization, chloritization, saussuritization and silicification. It seems that the ore was formed by hydrothermal solution and secondary enrichement. The ore minerals are mainly chalcopyrite and pyrite, with small amounts of malachite, azurite, chalcocite, cuprite, galena, and sphalerite, magnetite, tetrahedrite and etc.. The efficient plan of copper mine developments in surveyed region are as following; (a) Gyeongnam Copper districts are divided in 4 area as mentioned above. (b) Each area would be likely developed as group-working as one unit. For the sufficiently supplying a demand of electric copper, the importations of high grade copper ore in foreign country are invitable at present status of copper mine developments and exploitations.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.21 no.4
• /
• pp.259-268
• /
• 1988

Clay deposits in the vicinity of the Gwangpo Bay, southern coast of Korea, occur restrictively in anorthositic masses. Laumontite and meta-halloysite are the predominant clay minerals with iron oxides at the uppermost surface. Chlorite and halloysite occur in deeper zone. Beneath the main clay horizon, but not above, some anorthositic rocks are pervasively altered to quartz, sericite, chlorite, pyrite and montmorillonite along the hydrothermal channels. The hypotheses of hydrothermal and weathering origins of the clay minerals are tested by multi-component equilibrium calculations of the reactions of modified hydrothermal water and rain water with anorthositic rocks at $100^{\circ}C\;and\;25^{\circ}C$, respectively. The calculated mineralogy from the reaction with rain water resembles natural mineral assemblage except for abundance in laumontite. The result implies that the weathering process is the main machanism of the formation of clay deposits in the area.

• 한국정보컨버전스학회:학술대회논문집
• /
• 2008.06a
• /
• pp.99-102
• /
• 2008

Mineralogical studies of ore and alteration minerals have been conducted for the Hugo Dummett porphyry copper deposit. The Hugo Dummett porphyry copper gold deposit is located in the South Gobi region, Mongolia and currently being explored. This deposit divided into the Cu-rich Hugo Dummett South and the Cu-Au-rich Hugo Dummett North deposits. The Hugo Dummett deposits contain 1.08% copper(1.16 billion tonnes in total) and 0.23 g/t gold(Oyunchimeg et al., 2006). Copper-gold mineralization at these deposit are centered on a high-grade copper(typically>2.5%) and gold(0.5-2 g/t) zone of intense quartz stockwork veining. The high grade copper and gold zone is mainly within the Late Devonian quartz monzodiorite intrusions and augite basalt, also locally occurs in dacitic rocks. Intense quartz veining forms a lens up to 100 m wide hosted by augite basalt and partly by quartz monzodiorite. Although many explorations have been carried out, only a few scientific works were done in the Oyu Tolgoi mining area. Therefore the nature of copper-gold mineralization and orgin of the deposit is not fully understood. Copper-gold mineralization in the Hugo Dummett deposits occurs in dominantly quartz monzodiorite and minor augite basalt, dacitic rocks and locally biotite granodiorite. Chalcopyrite, pyrite, bornite, molybdenite, tennantite, tetrahedrite, enargite, sphalerite, chalcocite, covellite, eugenite, galena and gold occur as main ore minerals in the Hugo Dummett North and South deposits. These sulfides occur as: (1) a vague vein-like trail 1-3cm long and 2-3 mm wide, (2) minute, discontinuous cracks within quartz(micron scales), and (3) irregular blebs/spots(micron scales)and (4) disseminated within the sericite and plagioclase, commonly concentrated in the quartz. Sulfide minerals commonly display as a replacement, intergrown and minor exsolution texture in the both of the Hugo Dummet deposits.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.2 s.48
• /
• pp.71-80
• /
• 2006

We examined the mineralogical composition of pyrite-bearing rocks by quantitative powder X-ray diffraction analysis using the matrix-flushing method and ROCKJOCK (a full pattern fitting computer program). The neutralization potential (NP) and acid generating potential (AP) were calculated on the basis of mineralogical compositions. The mineralogical AP was compared with the conventional AP calculated from bulk sulfur concentration to assess the applicability to the prediction of acid rock drainage(ARD). The pyrite content calculated by matrix-flushing method showed a high positive correlation($r^2$=0.95) with those by ROCKJOCK. The pyrite contents by matrix-flushing method was 1.45 times larger than those by ROCKJOCK. The pyrite content and mineralogical AP obtained by the matrix-flushing method had a better correlation($r^2$=0.98) with those by the total sulfur concentrations in the all samples except KB sample. The mineralogical NPs of YJ sample were 23.0 and 34.0(kg $CaCO_3$ equivalent per tonne) by matrix-flushing method and ROCKJOCK, respectively. The AP calculated by matrix-flushing method and ROCKJOCK program were 47% and 72% of those by the conventional ABA test. We hereby suggested that the quantitative analysis using XRD data can be applied to prediction of ARD. For more reliable calculation of the mineralogical NP and AP, other sulfide and carbonate minerals such as pyrrhotite, dolomite, ankerite, siderite, rhodochrosite which can affact the mineralogical NP and AP should be considered.

• Geophysics and Geophysical Exploration
• /
• v.7 no.4
• /
• pp.217-224
• /
• 2004

Self-potential and electrical resistivity methods were conducted for locating the auriferous mineralized zone, called Jija Vein, of Sambo mine, Limsu-ri, Haeje-myeon, Muahn-gun, Jeollanam-do. The host rocks of the mineralization include gneiss, rhyolite and felsic dyke. Ore vein is mainly fissured-filling type and sulfide minerals, such as pyrite, are disseminated in country rock. By the electrical responses from SP and surface resistivity methods., the mineralized zone is supposed to extend about 360 m directed N5W with the width of 20 m to 30 m. From resistivity tomograms using inclined borehole to surface, the ore body shape is interpreted as the width of 20 m in depth 40 m to 50 m.

• Journal of the Mineralogical Society of Korea
• /
• v.6 no.2
• /
• pp.80-93
• /
• 1993

Jido kaolin deposits developed in the rhyolitic tuff of Cretaceous are located in the western part of Sinan-gun, Jeonranam-do. Jido kaolin deposits is predominantly composed of pyrophyllite, kaolinite and illite. On the basis of mineral assemblage Jido kaolin deposits can be divided into three alteraion zone from the center of alteration to the margin; kaolinite, kaolinite-pyrophyillite and pyrophyillite zones. Discriminant analysis show that $Al_2O_3$, $K_2O$, $Na_2O$, CaO of major elements are discriminant elements classifying kaolinite, kaolinite-pyrophyllite and pyrophyllite zones, while in case of trace elements Cr, Ni, Sc, Zn, and Zr are discriminant elements. Kaolin deposits has been formed by the hydrothermal alterations of the volcano rocks such as rhyolitic tuff and lapilli tuff, in late cretaceous. On the basis of the results of X-ray diffraction analysis, the deposits can be classified into three types of minerals assemblages; kaolinite, kaolinite-pyrophyllite and pyrophyllite zones. All the assemblages contain quartz and muscovite, but the kaolinite zone contains kaolinite, illite and chlorite, the kaolinite-pyrophyllite zone contains kaolinite, pyrophyllite and the pyrophyllite zone contains illite and pyrite.

• Economic and Environmental Geology
• /
• v.19 no.2
• /
• pp.85-96
• /
• 1986

The Bupyeong Silver mine which is located approximately 35km west of Seoul is currently the leading silver producer in Korea. The deposits occur as stockwork deposits hosted in Jurassic pyroclastic rocks. Occurrences of ore deposits and mineral paragenesis suggest a division of mineralization into four stages: Stage I, deposition of iron oxide and base metal sulfides; Stage II, deposition of tin oxide and silverm inerals; stage III, deposition of native silver and other silver minerals; Stage IV, formation of pyrite bearing siderite veinlets, Silver minerals in ore are native silver, argentite, freibergite, pyrargyrite, canfieldite, polybasite, dyscrasite and Ag-Fe-S mineral. The most important silver mineral is native silver among them. Chemical composition of important silver minerals were determined by electron probe microanalyser. Assay, size and modal analyses for floatation products were carried out. In floatation products, relative proportion of native silver for total important silver minerals have following ranges: feed, 64.7 to 74.74 wt.%; A-cleaner concentrate, 80.58 to 98.79 wt.%; and final tailing, 28.12 to 72. 57 wt. %. Average degree of liberation for native silver in feed and A-cleaner concentrate are 60.49% and 77.57% respectively. Negative relationship can be recognized between native silver and argentite in their abundance and behavior in floatation precesses.

• Economic and Environmental Geology
• /
• v.22 no.4
• /
• pp.341-354
• /
• 1989

Mineralogy and geochemistry of five pyrophyllite deposits in Yangsan-Milyang area such as Cheonbulsan, Dumyong, Dongrae, Youkwang, and Sungjin mines were investigated. Pyrophyllite ores consist mainly of pyrophyllite, sericite, and quartz with some amounts of kaolinite and pyrite. Polytype of pyrophyllite is 2M. Sericite has two polytypes of 1M and 2M1. The ${\delta}^{18}O$ values of pyrophyllite from the Cheonbulsan and the Dumyong mines were measured as 0.23-0.60‰ and 3.40‰, respectively, and those of montmorillonite and kaolinite from the Dumyong mine were in the range of 11.90-12.06‰. This low oxygen isotope composition provides conclusive evidence for hydrothermal activity in the studied area. Contents of major elements are more useful than those of trace elements to discriminate altered zones such as pyrophyllite, sericite, argillic, and andalusite zones from the surrounding rocks. Particularly, contents of $K_2O$, $Na_2O$ and CaO are helpful to identify alteration zones from the discriminant and the cluster analysis of multi-element data.

• Economic and Environmental Geology
• /
• v.13 no.2
• /
• pp.104-116
• /
• 1980

The Ulsan mine is one of the largest contact metasomatic magnetite and scheelite deposits in the southeastern part of Korea. Mineralization at the Ulsan mine is localized along the contact between upper Cretaceous volcanic rocks and age unknown limestone which were intruded by 58 m.y. -old biotite-horndlende granite. General zonal sequence of skarn toward crystalline limestone from limestone-volcanics contact is grandite, grandite-salite and salite zones. On the otherhand volcanics origin skarns exhibits zonal sequences toward hornfels from boundary with limestone is garnet, garnet-epidote, and epidote zone. Compositions of garnets and clinopyro xenes are determined by the X-ray diffraction and reflective indecies. Local brecciation of these early skarns were followed by formation of the later skarn as zoned patches, breccia fillings and cross-cutting veins. Paragenetic sequence of late skarn minerals which is exhibited in the zoned patches and veins is an overlapping progression with time from andradite through hedenbergite or actinolite, quartz to calcite deposition. Magnetite metallization followed early formed skarns and pyrite pyrrhoite, sphalerite, galena, tennantite, scheelite and arsenopyrite deposition were simultaneously with hedenbergite, quartz and calcite of late skarn. Filling temperatures of fluid inclusions in calcites range from $160^{\circ}$ to $280^{\circ}C$.