• 제목/요약/키워드: Pyeongtaek Port

검색결과 65건 처리시간 0.028초

방위끌림이 없는 장애물에 대한 함정의 충돌회피 기준에 관한 연구 (A Study on the Criteria for Collision Avoidance of Naval Ships for Obstacles in Constant Bearing, Decreasing Range (CBDR))

  • 하정수;정연환
    • 한국항해항만학회지
    • /
    • 제43권6호
    • /
    • pp.377-383
    • /
    • 2019
  • 항해 중인 함정은 늘 충돌 가능성이 존재하지만 충돌회피를 위한 명확한 기동지침은 없고 함교 당직사관의 직관적 판단에 의존하는 경향이 있다. 본 연구에서는 항해 중인 함정이 방위끌림이 없는 장애물을 조우하는 상황에서 함교 당직사관을 대상으로 언제 어떻게 충돌을 회피하는지 설문조사를 실시하였다. 설문 결과를 활용하여 방위끌림이 없는 장애물 조우 상황, 주·야간 충돌 회피 방법을 분석하였다. 조함이 까다로운 지역은 평택, 목포 순이었고, 주로 협수로 내에서 발생하였다. 빈도는 4시간 항해 시 평균 1회 정도로 나타났으며, 1:1 조우 상황보다 다수 선박 조우가 많았다. 충돌침로 확인 시 전자해도보다 육안 확인 결과를 더 신뢰하였고, 충돌회피 고려 요소로 최단 접근거리, 최단 접근시간을 우선시하였다. 피항의무선과 침로유지선의 충돌회피 기동상 특별한 차이는 없었지만 주·야간 시 최단 접근거리의 차이는 존재했다. 충돌회피 시 대부분의 항해사들은 변침·변속을 함께 사용하는 것을 선호하며 타각 10~15°, 변속 ±5knots, 변침침로는 타함 함미 정방향에서 함미 가중치를 두었다. 이러한 결과들은 승조원들에게 부임 함정의 충돌 회피 기준을 제공하는데 도움이 될 것이며 나아가 AI, 빅데이터 기반의 무인함정 충돌회피 알고리즘 개발에도 적용될 것이다.

수도권 콜드체인 클러스터 경쟁력 평가에 관한 연구 (An Evaluation of Cold Chain Cluster Competitiveness in the Metropolitan Area)

  • 안길섭;박성훈;이해찬;여기태
    • 디지털융복합연구
    • /
    • 제18권10호
    • /
    • pp.181-194
    • /
    • 2020
  • 유통시장의 변화에 따라 농·수·축산물의 보관과 유통 그리고 가공식품 및 신선식품의 보관과 운송에 대한 이슈가 급부상하고 있으며, 이에 따라 콜드체인이 물류 서비스의 한축으로 자연스럽게 주목을 받고 있다. 본 연구는 최근 들어 활기를 띠고 있는 냉동냉장 식품 등 콜드체인 유통과 관련하여 관심을 끌고 있는 수도권 지역 콜드체인 클러스터 구축에 대한 입지 경쟁력 평가를 목적으로 한다. 이를 위해 본 연구는 전문가의 지식을 효율적으로 추출하여 계량화할 수 있는 CFPR(Consistent Fuzzy Preference Relations) 분석기법을 활용하여 수도권 콜드체인 클러스터 후보지에 대한 경쟁력을 평가하였다. 연구 결과, 입지 경쟁력은 인천신항 배후부지, 경기 남부권(용인), 경기 서부권(김포 물류단지), 평택오성물류단지 순으로 우수한 것으로 나타났다. 특히 본 연구는 냉동·냉장 물류창고 운영 전문가의 지식을 추출하여, 수도권 콜드체인 클러스터 후보지에 대한 세부적인 경쟁력 평가를 실시하고, 최적의 클러스터 후보지를 제시하였다는 점에서 기존 연구들과 차별성을 가진다. 향후 연구에서는 설문 대상을 신선식품 물류센터의 소유권을 확보하기 위한 구매 및 구축 결정권을 가진 기업경영자, 대기업군, 공공기업 군 등으로 구분하여 조사할 필요가 있다.

시계제한시 선박 출항통제규정 개선에 관한 실증적 연구 -평택항을 중심으로- (An Empirical Study to Improve Vessel Departure Control Regulations for Restricted Visibility, Focused on Pyeongtaek Port)

  • 유상록;정재용
    • 해양환경안전학회지
    • /
    • 제24권7호
    • /
    • pp.858-862
    • /
    • 2018
  • 본 연구는 시계제한으로 인한 선박 출항통제 해제 후 교통량이 폭주하는 것을 예방하기 위해 현 선박통제규정을 개선하고자 하였다. 평상시의 교통량과 출항통제 해제 후의 교통량를 분석하기 위해 AIS 데이터를 수집하였다. 출항통제 유무에 따른 피크시간 교통량의 차이를 확인하기 위하여 통계검정을 실시하였다. 연구결과 1만톤 미만 그룹에서는 t-test를 실시한 결과, 유의미한 교통량의 차이가 있는 것으로 나타났다. 1만톤 이상 그룹에서는 Mann-Whitney test 결과, 선박 통제 유무에 따른 교통량의 차이가 없는 것으로 나타났다. 출항통제 해제 후 1만톤 미만의 중소형 선박들은 평상시 보다 교통량이 142 % 증가하여 1만톤 이상 대형선박과 동시에 출항하게 됨에 따라 교통 폭주를 야기한 것으로 분석되었다. 이러한 교통량 폭주에 따른 선박 충돌사고 개연성을 미연에 방지하고자 현 규정을 길이 160 m 미만 또는 총톤수 1만톤 미만의 선박은 항해 가능하도록 개선할 것을 제언하였다.

해상 유해액체물질(NLS) 유출사고대비 물질군 선정에 관한 연구 (Prioritizing Noxious Liquid Substances (NLS) for Preparedness Against Potential Spill Incidents in Korean Coastal Waters)

  • 김영윤;최정윤;손민호;오상우;이문진;이상진
    • 해양환경안전학회지
    • /
    • 제22권7호
    • /
    • pp.846-853
    • /
    • 2016
  • 해상 유통되는 유해액체물질(NLS)의 유출사고대비 물질군 선정을 위해 596종의 NLS를 대상으로 위해성 DB를 구축하고 우선 순위 선정시스템을 통해 전체 우선순위를 선정하였다. 우선순위 목록을 바탕으로 2014-2015년 해상유통물질 158종을 추출한 뒤 물질군 구분 기준을 적용하여 0~3순위의 4개 물질군을 제시하였다. 국가차원의 NLS 유출사고대비를 위해서는 물동량 및 유해성이 높은 0~1순위 물질군의 집중관리와 함께 2~3순위 물질군의 정보 구축작업이 지속되어야 한다. 항만별로는 NLS 유통 유형이 다르므로 각 항만의 물질별 유통특성을 파악한 뒤 0~1순위 물질군 위주로 관리하는 것이 효율적일 것으로 판단된다. 또한, 동해남부권역(울산, 부산), 남해중부권역(광양, 여수), 서해중부권역(평택, 대산, 인천)을 NLS 사고대비를 위한 특별관리구역으로 지정하여 해상유통되는 NLS 의 감시 감독을 강화하고 방제 장비, 자재 및 약제를 집중 배치해야 할 것으로 판단된다. 향후, 위해성 DB의 구축과정에서 나타난 위해성 정보 부재 물질들의(만성독성) 지속적인 생산 및 보완이 필요하며, 특히 수생태 독성의 경우 해양생물종을 대상으로 한 자료 생산 및 확보가 지속되어야 할 것이다. 또한, 해상 HNS 사고 관리를 위해서는 HNS 해상유통에 대한 정보를 확인할 수 있는 시스템이 조속히 구축되어야 한다.

자동차 선적작업장의 공기오염 실태조사 (Investigation into Air Pollution in Car Shipping Workshop in Pyeongtaek Port)

  • 김지호;원종욱;김치년;노재훈
    • 한국산업보건학회지
    • /
    • 제16권1호
    • /
    • pp.44-53
    • /
    • 2006
  • This study purposed to investigate air pollution in car shipping yards and, for this purpose, we selected an outdoor open-air yard and an indoor ramp into the ship and measured the concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10, PM2.5 and heavy metals in the air. The results of this study are as follows. No significant difference was observed in temperature and humidity between the outdoor and indoor workshop, and the average air flow was 0.52 m/s in the indoor workshop, which is higher than 0.19 m/s in the outdoor workshop(p<0.01). The average concentrations of sulfur dioxide, nitrogen dioxide, carbon monoxide, PM10 and PM2.5 according to workplace were 0.03 ppm(${\pm}0.01$), 0.03 ppm(${\pm}0.01$), 0.46 ppm(${\pm}0.22$), $39.44{\mu}g/m^3$(${\pm}2.45$) and $5.45{\mu}g/m^3$(${\pm}1.15$) respectively in the outdoor workshop, and 0.15 ppm(${\pm}0.05$), 0.22 ppm(${\pm}0.06$), 8.85 ppm(${\pm}3.35$), $236.39{\mu}g/m^3$(${\pm}58.21$) and $152.43{\mu}g/m^3$(${\pm}35.42$) respectively in the indoor workshop. Thus, the concentrations of gaseous substances in the indoor workshop were 4.9-19.2 times higher than those in the outdoor workshop, and the concentrations of fine dusts were 5.9-27.9 times higher(p<0.01). In addition, according to the result of investigating pollutant concentrations according to displacement and the number of car loaded when shipping gasoline cars into the ship, no significant relation between the number of cars loaded and pollutants was observed in shipping passenger cars, but the concentrations of nitrogen dioxide and carbon monoxide got somewhat higher with the increase of the number of cars loaded(p<0.05). In addition, the concentrations of nitrogen dioxide, carbon monoxide, PM10 and PM2.5 in the air were significantly higher when shipping recreational vehicles, the displacement of which is larger than passenger cars, than when shipping passenger cars(p<0.01). On the other hand, the average heavy metal concentrations of the air in indoor workshop were: lead $-0.05{\mu}g/m^3$(${\pm}0.10$); chromium $-0.90{\mu}g/m^3$(${\pm}0.18$); zinc $-0.38{\mu}g/m^3$(${\pm}0.24$); copper $-0.18{\mu}g/m^3$(${\pm}0.22$); and manganese and cadmium not detected. In addition, the complaining rates of 'asthma,' a major symptom of chronic respiratory diseases, were 18.5% and 22.5% respectively in indoor workers and outdoor workers. Thus the rate was somewhat higher in indoor workers but the difference was not statistically significant. The complaining rates of 'chronic cough' and 'chronic phlegm' were very low and little different between indoor and outdoor workers. The results of this study show that the reason for the higher air pollution in indoor than in outdoor workshop is incomplete combustion of fuel due to sudden start and over-speed when cars are driven inside the ship. In order to prevent high air pollution, efficient management measures should be taken including the observance of the optimal speed, the improvement of old ships and the installation of efficient ventilation system.