• 대한토목학회논문집
• /
• 제29권6A호
• /
• pp.661-669
• /
• 2009

강 콘크리트 합성구조에서 강재와 콘크리트 사이의 경계면에 효과적인 응력전달과 합성거동을 유도하기 위하여 스터드, 채널, 유공강판 등이 사용된다. 많은 연구자들이 여러 종류의 전단연결재의 특성을 개선시키기 위해 많은 노력을 기울이고 있다. 본 연구에서는 확대기초와 말뚝과의 합성을 위해 개방형 퍼포본드로 보강된 강관 말뚝머리의 인발 및 압발거동을 분석하였다. 다양한 변수해석에서 요구되는 자료를 제공하고자 비선형 유한요소해석 프로그램인 ABAQUS를 사용하여 매개변수 해석을 수행하였다.

• 공업화학
• /
• 제24권5호
• /
• pp.537-543
• /
• 2013

본 연구에서는 유기박막태양전지로 적용 가능한 push-pull 구조의 고분자를 합성하여 그 특성을 확인하였다. 전자주개 물질로는 benzodithiophene 유도체를 도입하였고, 전자받개물질은 benzothiadiazole 유도체를 사용하여 Stille coupling 반응으로 poly{4,8-didodecyloxybenzo[1,2-b;3,4-b]dithiophene-alt-5,6-bis(octyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]-thiadiazole} (PDBDT-TBTD)를 합성하였다. 각 합성 단계별 단량체의 확인은 $^1H-NMR$과 GC-MS를 통해 이루어졌으며, 합성된 conjugated polymer는 GPC, TGA, UV-Vis, cyclic voltammetry를 이용하여 물리적, 광학적 및 전기화학적 특성을 확인하였다. PDBDT-TBTD의 수평균 분자량은 6200이였으며, 초기 분해온도(5% weight loss temperature, $T_d$)값은 $323^{\circ}C$로 측정 되었다. 박막형태에서의 최대 흡수파장은 599 nm이며, 광학적 밴드갭(${E_g}^{opt}$)은 1.70 eV으로 확인되었다. 유기박막태양전지 소자는 ITO/PEDOT : PSS/PDBDT-TBTD : $PC_{71}BM/BaF_2/Ba/Al$ 구조로 제작하였으며, PDBDT-TBTD와 $PC_{71}BM$를 1 : 2 (w/w)의 비율로 블렌딩하여 광활성층으로 사용하였다. 제작된 소자는 solar simulator으로 광전변환효율을 확인하였고, 최대 광전변환효율은 2.1%이었다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.291-293
• /
• 2003

A semiconductor switch-based fast hi-polar high voltage pulse generator is proposed in this paper The proposed pulse system is made of a thyristor based-rectifier, DC link capacitor, a push-pull resonant inverter, a high voltage transformer. secondary capacitor, a high voltage IGBT & diode stacks, and a variable capacitor. The proposed system makes hi-polar high voltage sinusoidal waveform using resonance between leakage inductance of the transformer and secondary capacitor and transfers energy to output load at maximum of the secondary capacitor voltage. Compared to previous hi-polar high voltage pulse power supply using nonlinear transmission line, the proposed pulse power system using only semiconductor switches has simple structure and gives high efficiency

• 한국경영과학회지
• /
• 제18권3호
• /
• pp.1-12
• /
• 1993

Several alternative manufacturing control strategies are under study in the literature. They are, specifically, push system, pull system, conwip system, and as a special case, infinite buffer system. We focus on modeling, comparison analysis and design of these systems. The event epoch sequences of each system are generated which also enable us to compare their performance. Then the stochastic monotonicity of these enent epoch sequences in several important design parameters are established through the structure of the generalized semi-Markov schemes on which they are based. Finally, we solve the stochastic optimization problem which minimizes these event epochs. Our results supplement the applicability of some previously known results in the literature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 B
• /
• pp.880-882
• /
• 2001

A moving-coil-type linear oscillatory actuator is consisted of the NdFeB permanent magnets with high specific energy as the stator, a coil-wrapped nonmagnetic hollow rectangular structure and an iron core as a pathway for magnetic flux. The inductance of moving coil and the push/pull effect is obtained from the permeance model of LOA with the open magnetic circuit. The analytical method are verified using the 2D finite element method.

• Journal of Power Electronics
• /
• 제9권1호
• /
• pp.61-67
• /
• 2009

In this paper, a simple technique is presented for robust stability testing of perturbed DC-DC converters having multi-linear uncertainty structure. This technique provides a necessary and sufficient condition for testing robust stability. It is based on the corollary of Routh criterion and gridding of parameters. The previous work based on parametric control theory using Kharitonov's theorem and Hermite Biehler theorem gives conservative results and only the sufficient condition of stability, whereas the proposed method provides the necessary and sufficient condition for testing robust stability and it is computationally efficient. The superiority of the method is compared with the Edge theorem.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.136-137
• /
• 2006

Crack initiation and short crack propagation was studied on the polished notched surfaces of Cr-Mo prealloy sintered steels with 7.35 $g.cm^{-3}$ sintered density. An ultrasonic resonance test system operating in push-pull mode at 20 kHz and R=-1 was used. It showed that crack initiation took place in several places, small cracks growing oriented to the local pore structure rather than to stress orientation. Their growth rate is markedly higher than the corresponding one of long cracks. Finally, several microcracks join to form a dominant crack.

• 한국표면공학회지
• /
• 제29권2호
• /
• pp.109-119
• /
• 1996

In order to improve adhesion of electroless copper deposits on alumina substrates, some stabilizers such as 2-Mercapto Benzothiazole, thiourea and NaCN were added over a wide range of concentrations. The adhesion tests of the deposits were performed by using the cellophane tape and the push-pull scale. With the minor addition of the stabilizers, 2-MBT having a large molecular size gives poor adhesion, together with a finer grain structure, whereas Thiourea and NaCN show a high mechanical strength of the deposits. The high mechanical strength is supposed to be due to the easy desorption of hydrogen gas generated from the electroless reactions. A large amount of the three stabilizers decreases the adhesion for all the cases, resulting from strong adsorption of the stabilizers to the substrates.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2008년도 춘계 학술발표회 논문집
• /
• pp.171-178
• /
• 2008

This paper is concerned with the development of a measurement system using field measuring device which will give the membrane stress of the membrane structures. Up to this point, several techniques on measurement of membrane stresses has been proposed and some have been used in the fields, but accuracy of the measured stresses to be far from reliable one. Such situation has not been changed until recent days, we do not have the measurement device on which we can depend. On top of that, due to the different properties in cross directions for material of the membrane, the stress in the warp direction is different from that in the fill one. A new method is proposed to measured membrane stresses in two different direction separately, where instead of membrane stresses directly, an external force perpendicular to the membrane to be applied. A portable device can measure the applied force and the displacement. A special testing bed to be fabricated to accommodate $50cm{\times}50$ manbrane specimen which can apply 5 ton load in two orthogonal direction. A special device using push-pull gage was developed. To measure the membrane stresses in warp and fill direction separately, a different length of the tips are used. The measuring device which can called tension meter, can be calibrated on the testing bed, and optimized the length and shape of tip.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.805-814
• /
• 2016

Electric-field coupled power transfer (ECPT) systems have been proposed as an alternative wireless power transfer (WPT) technology in recent years. With the use of capacitive plates as a coupling structure, ECPT systems have many advantages such as design flexibility, reduced volume of the coupling structure and metal penetration ability. In addition, wireless communications are effective solutions to improve the safety and controllability of ECPT systems. This paper proposes a power and signal shared channel for electric-field coupled power transfer systems. The shared channel includes two similar electrical circuits with a band pass filter and a signal detection resistor in each. This is designed based on the traditional current-fed push-pull topology. An analysis of the mutual interference between the power and signal transmission, the channel power and signal attenuations, and the dynamic characteristic of the signal channel are conducted to determine the values for the electrical components of the proposed shared channel. Experimental results show that the designed channel can transfer over 100W of output power and data with a data rate from 300bps to 120 kbps.